Skip to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Scene Controller Behavior in eisy-ui / UD Mobile

Featured Replies

Hi! I just migrated from my ISY994 to the EISY (Insteon only). I previously used the Admin Console for local control and the Mobilinc app for remote control and am now moving over to UD Mobile and eisy-ui. One thing I have noticed is that when working in both the new mobile app and new ui, if I turn on a switch that is a controller for a scene, only that switch will turn on - none of the responders change state. In order to activate all nodes in the the scene you need to directly interact with the scene's node. (I should note that physically toggling the switch does effect the scene as expected.) With the old Admin Console/Mobilinc, if you would interact with a device's node, it would effect the other members of the scene. Is this expected?

Thanks!

I am having the same type problem and posted the following someplace on the forum, more than likely the wrong place but here it is:

I am working on setting up a Home Page in my UI with all updates as of 11/04/2026 and I have problems with 2334-2 KeypadLinc 8 Button indicator lights not working correctly. I have the 2334-2 KeypadLinc buttons A & B paired together to look like a 6 button unit but I am using it as an 8 button. The KeypadLinc, a remote button (2342-232) and my phone app working correctly with the A & B buttons. The problem I am having is in the new UI when I turn on the overhead light button A indicator lights up but button B does not, I have linked all of the nodes that I think are needed and that I use I the other apps but no luck. I have other 2334-2 KeypadLinc  indicator lights that will not turn or turn off with the new UI but work fine with the other apps. The controlled device always works it is just the indicator on the KeypadLinc that is the problem.

This did not help you but someone may see it :

Thank you

Switching the Device in the Mobile app/eisy-ui/program does not trigger the Scene, this has never been a thing in any app, unless configured to show the light status while issuing Scene Commands.

Each Group of Devices has a Scene for each Controller, including a Virtual Device for commands issued from the App/eisy-ui/programs. Triggering the device itself from App/eisy-ui/programs does not trigger the Scene. Scene triggers require physical control of the device, except for commands issued to the Scene (Virtual Device)

See https://wiki.universal-devices.com/Eisy-ui#Groups_/_Scenes

Are you saying the only way the back-light on my KeyPadLink will work correctly is at the device. My portal app works just fine with all my KeypadLinks and back-lights and other devices, also the little 2342-232 Mini Remote 4-Scene I have works better than some of the wired devices.

Home Tile View.pngGroup View-1.pngGroup View-2.png

45 minutes ago, RVandergriff01 said:

Are you saying the only way the back-light on my KeyPadLink will work correctly is at the device.

It may depend on how the keypadlinc is set up. Did you use mutual-exclusive relationships built into the keypad? If so, then I suspect that the backlights will be correct only at the device.

On 11/10/2026 at 1:36 PM, joshdub said:

With the old Admin Console/Mobilinc, if you would interact with a device's node, it would effect the other members of the scene.

I would have responded the same as Javi...I don't believe that remotely controlling a device (whether from the admin console or mobilinc or udmobile) would ever trigger a scene response. As far as I remember back, Insteon devices only act as scene controllers when physically toggled locally. As Javi pointed out, the potential workaround would be to control the scene, but use the individual device as a status indicator.

My memory is the same as @oberkc

There were times I had forgotten this and was a real headscratcher back when I was using the ISY99i

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.