tazman

I still have this problem after I reboot Polisy it takes several hours for programs and Z-Wave items to start working again. But fingers crossed so far it comes back on it's own, so I just try not to reboot unless totally necessary which I had to do about one week ago.

@Steve Lyou were running the "if" of a program when you should have run the "then" Run Program 'Timer.Lights' (If) But I don't think that program would ever stop running.

You just need to install the firmware on your 994 that supports Insteon. If your 994 has the 300 series Z-Wave board then you should not update past the 5.0.16C version of firmware.

I have not used PG2 in a while and just now I had to put in https:// to get it to come up so you should try https://192.168.0.10/login

@upstatemike https://192.168.0.10 in a browser should go to PG2 http://192.168.0.10:3030 in a browser should go to PG3 http://192.168.0.10:8080 should access IoP on the local network Then in Putty 192.168.0.10 Port 22 you can SSH into the command line

There is some confusion for me now. Are you trying to get to the command line where you would use Putty?

Can you verify that IoP is running?

Have you tried http://192.168.0.10:8080/desc

@gviliunasI have the same problem as you and it came down to @Michel Kohanimnot being able to help me figure it out and he said to send the items to UDI and they would figure out what was wrong but with the upcoming release of the new equipment I did not want to go without the hardware so I just decided to try not to reboot and live with it for now. It sounds like @tlightne has a different problem since some of his Z-Wave stuff is working and it does not sound like the whole system hangs until Z-Wave dongle becomes responsive.

@Craigb8080 for the port works for me.

I did try what you outlined and I even stopped PG3 service and it did not seem to make a difference.

I will stop hijacking this thread but just put it out there that mine still does not start right with all my node servers in PG3 disabled and I can't even get a response on my ticket from UDI.

Thanks for the update @gviliunasI have the Wireless Tag NS also so I will have to see if that is what is causing my issue on reboot.

I don't know I have had it start working within half an hour and once it took more than 4 hours. It makes me feel better now that I'm not the only one, but not so good for you.

@gviliunasI have this issue after a reboot and it seems to clear on it's own after an undetermined amount of time. My Z-Wave items are not working either when this occurs but they also start working on their own. I worked with @Michel Kohanimthrough a ticket but have not heard back from him for a couple of days on it.

@tmorse305 thanks for the suggestion I do have it setup on HA but I just can't get behind the way things have to be done in HA. I probably could get it to pass the numbers to Polisy but not really what I want.

Thanks but not really what I'm looking for. Searching Github I saw a mention of PG3 on another persons page so maybe there is hope! The unfortunate part is I have the time and spent many hours looking at node servers and trying to learn to code. I can get the commands here and there but I just don't know how to tie it all together.

There are a couple of us trying to get support for the Vue 2! Unfortunately if you don't buy the same items as what the developers have it is tough to get a node server for your product.

I don't use PG2 any longer but I tested it and I don't get a response either. I usually update using putty but it is in the admin console now also but I have to boot up the computer for that.

I did the update and restart and I'm back in business! Thanks for all the information and support.

Thanks for the update @EricBarishand @bpwwerI will update Polisy when I get home. I'm glad UDI was able to get it sorted out quickly.

I just wish there would have been a warning posted because I would not of upgraded had I known. There has to be a way to reinstall what was removed but I don't know enough and all of my node servers are not working right now.

Thanks for the update @bpwwerI just wanted to be sure it was known there is a problem. I would not have updated if I knew there was an issue.

I ran update upgrade and restarted PG3 through Putty today and none of the node servers will start in PG3 and show disconnected. I restarted everything and verified the ISY password in PG3 but none of the node servers will start. The errors I see in the main PG3 log are bellow it seems like some of the packets were missing in the update and it did say about having to install python packets separately but I did not take a screen shot of all it said when I should have. Should I put in a ticket or can somebody look at the update procedure and see if there is something wrong there? 6/27/2022, 18:54:37 [pg3] error: unhandledRejection REPORT THIS!: [object Promise], reason: TypeError: store.getPurchaseEntry is not a function 6/27/2022, 18:54:07 [pg3] error: [Virtual(2)] :: STDERR: Traceback (most recent call last): File "/var/polyglot/pg3/ns/edited_2/./Virtual.py", line 10, in <module> 6/27/2022, 18:54:07 [pg3] error: [Virtual(2)] :: STDERR: import udi_interface ModuleNotFoundError: No module named 'udi_interface'

I have found a use to track a number that is not temperature also. I would like to be able to have nothing after the number or have it be that we can add anything we like because mine would be % but I have the ability to add it in Housepanel if I need to.