Michel Kohanim

Matt, I think you may want to use our 994 with integrated Zigbee. This way, ECM will publish its events to ISY. polexian, I cannot reproduce the IR issue. Can you please give me more details as to the use case? With kind regards, Michel

Hello hbsh01, My bad. It runs the If clause and if evaluated to true, then runs the Then clause. If the program is enabled and if the condition would cause it to run regardless, then the program would run and has precedence over Run at startup. Run at startup basically forces programs that a) might not have conditions to cause it to run at startup OR are not enabled to run based on their condition. With kind regards, Michel

Hello Matt, We have never tested this configuration. As I mentioned, EP1 must be in server mode (i.e. it will respond to requests and NOT push data) for this to work. io_guy, this is not anything you or your application doing that's wrong. It's our logging that has a bug: in http basic authentication, the client sends a request without userid/pwd and the server sends back the www-authenticate header. So, obviously, there will be at least one request without userid/pwd to ISY. We should log attempts of more than one and we are not doing that. This shall be fixed. With kind regards, Michel

Hi all, Thanks so very much for the feedback. Matt, you have to make sure EP1 is in server mode ... in most cases, the port is 5000. j0dan, we hope so. Tim, those are initial requests from DSC/WebLinc which come without userid/password. The code is already updated to log attempts of more than one. IM, that's a bug and it's already fixed. polexian, it might be a bug; it shall be verified and fixed immediately. I am hoping to have a minor release shortly to address these issues. With kind regards, Michel

Hello jpoje, You must use Link Management | Link a RemoteLinc. In the dialog, all you have to do is enter the address for your RemoteLinc. None of the other methods will work. Also, your RemoteLinc should be in programming mode: press and hold the Dim/Brt buttons for about 10 seconds or till the LED starts blinking. With kind regards, Michel

Hi apostolakisl/hbsh01, For those programs that have Run at Startup enabled, then yes, the Then clause is executed regardless of anything else (including enable/disable flags). With kind regards, Michel

Hello gwarthur, Did you change the HTTP port on your ISY? If not, do you use the same port for both Proliphix as well as ISY? With kind regards, Michel

Hi, Is your code subscribing to ISY? Have you tried 3.1.7? With kind regards, Michel

Hi Tim, Thanks; please do keep us posted. As far as port forwarding, you will find instructions here. If you have already done the same for SmartLinc, all you have to do is: 1. Change the port to 443 (regular httpS port) 2. Change the IP to point to ISY's IP address 3. Your remote URL would be httpS://your.remote.ip With kind regards, Michel

Hello all, Just wanted to let you know that Release 3.1.7 Beta is now available. With kind regards, Michel

Hello all, Just wanted to let you know that Release 3.1.7 Beta is now available. With kind regards, Michel

Hello all, I am happy to announce the availability of our 3.1.7 release! For a list of changes, please take a look at this post. IMPORTANT 1. This is a major release with very many changes to address performance and system stability especially in the case of adverse network conditions. Almost all parts of the framework have been touched in one way or another. The reason for the massive changes is related to Chrome's out of band HTTPS handling and support for 2048 bit SSL certificates. Although the whole firmware has been thoroughly tested, please do note that it is still beta and thus if you have mission critical applications, installation of this firmware is not recommended. 2. Please note that Network Resource modules are now running in their own task. This might have some ramifications as calling network resources from programs no longer waits for the resource to complete. As such, a) you will experience quicker handling of network resources/programs and if you are using DSCLinc and WebLinc, your programs may behave a little differently. Please do test your network resources thoroughly 3. Please note that Safari does not support SSL session reuse and thus might take an exorbitant amount of time to communicate with ISY. As such, when using 2048 bit SSL, it's best not to use Safari. 4. If you are using the Irrigation Module and are upgrading from releases prior to 3.1.5, you must edit the programs using Irrigation variables and save the programs again. Irrigation module is no longer on promotion 5. Upgrading from 3.1.3 and below: If you are using WeatherBug Module's Rain Today in your programs, please note that the precision has changed from 1/10 to 1/100 and thus your programs might not run properly Things to test: - New supported devices - System instability and network issues especially system hang (even though the programs continue to run) - Network resources and programs For a discussion of variables, please look at our Program Variables forum. Notes: 1. ISY-26 is no longer included in the firmware builds 2. Due to the sensitive nature of supporting MorningLinc, users now must agree to terms and conditions upon Admin Console start up otherwise the dialog keeps popping up every time the Admin Console is started 3. IMPORTANT If you have already installed a self signed certificate and your current firmware is 2.7.10 and below, you must reinstall a new one before the upgrade. Instructions: 1. Please backup your ISY (File | Backup ISY). If you are backing up a 3.1.6 system, please note that the backups are corrupted. If you have a backup from prior releases, you should be OK 2. Please download the firmware for your platform - please do not unzip ISY 99i Series OR 994i Series 3. Important (If upgrading from 2.8.5 through 2.8.14) Due to invalid Java certificate chain, please make sure to remove all Universal Devices certificates from Java: a. Close all browser sessions b. Open Java Control Panel (Java Preferences on MAC) c. Click on the Security tab. Remove all Universal Devices certificates (on MAC, click on the '-' button at the bottom) e. Clear your Java Cache 4. Login to the Admin Console and choose Help | Manually Upgrade [the name of your system] 5. Choose the file saved in step 2 MAC users: if upgrade fails, please add https://your.isy.ip.address to ISY Finder (see 3f above) 6. After the upgrade, ISY reboots. Please do ensure to clear your Java Cache 7. IMPORTANT Once upgrade is completed and ISY reboots, use any of the following methods to access your ISY's Admin Console: a. 99/994i - http://isy/admin - applet (Windows only) b. 99/994i - http://isy/admin.jnlp - Java application (Windows only) c. http://your.isy.ip.address/admin - applet d. http://your.isy.ip.address/admin.jnlp - Java application e. http://www.universal-devices.com/99i/3.1.7 - applet f. http://www.universal-devices.com/99i/3.1.7/admin.jnlp - Java application Dashboard - not fully supported - http://www.universal-devices.com/99i/3. ... board.jnlp 8. Please backup your system again Thanks and with kind regards, Michel

Hi Joe, Please just wait! Obviously you can link them to your devices but please note that any device restore will get rid of those links since ISY does not know they exist. With kind regards, Michel

Matapan, You can add them as responders to scenes. One for lock and one for unlock. With kind regards, Michel

Hi Tim, Just went through this setup again and mine are working fine. Is it possible to ask for just one replacement? This makes no sense at all! With kind regards, Michel

Hello bruinlax, Apologies for tardy reply. Boy, that's quite strange. Unfortunately without a debug build, there's not much you can get out of the shell except for some run time information. Now, is it possible that vbs is losing the userid/password? If so, that would explain everything: ISY is going to DOS mode (does not allow any more access for a while). Please take a look at your Error Log and check for -100xx errors. With kind regards, Michel

Hi apostolakisl, It is very important to know how long the AC was left on. If 24 hours and they were not in synch, then I suspect a bug. With kind regards, Michel

How long was the Admin Console on? With kind regards, Michel

Hi Tim, Ok, I have 1711 Rev 2.0 installed and working properly and reliably. Here's my configuration: 1. Jumper 5 is shorted 2. I used Add New INSTEON Device and chose Motion Sensor from the list Please note that if you use anything but Automatic in Link Management | Advanced Options, then you are bound to have intermittent issues. Hope this helps. With kind regards, Michel

Hi, Yes, that's what I mean. 2 minutes is unlikely but I am not sure whether or not you were looking at Program Summary while testing ... is it possible that Admin Console lost connection to ISY? With kind regards, Michel

Hello apostolakisl, The accuracy of the clock on the Admin Console is within the past 5 minutes. So, Admin Console gets the time from ISY, does it's one incrementing, and then synchs after 5 minutes again (to reduce the load on ISY). With kind regards, Michel

Hi bruinlax, Apologies for the inconvenience. First of all, 3.1.6 is a beta release which might not be stable enough for your test cases. Can you tell me the frequency of calls to /rest? Are they quickly (say every few seconds) and does ISY have access to the outside world? Also, please note that if you bombard ISY with /rest requests - and if they are to command devices - all ISY http tasks might block till the first command is completed. So, if you have a device that is not communicating, all other tasks are going to wait. Depending on what you are doing, this might take a minute or so. With kind regards, Michel

Hi Elvis, Thanks so very much for the update. Currently we have an issue whereby if DNS is not reachable and if you have programs that use DNS service, after about an hour, we lose all our buffers (slowly). Still have not been able to figure out the cause but are very close. With kind regards, Michel

Hi Tim, Working on it as we speak. I shall keep you posted. With kind regards, Michel

Hi Tim, Thanks so very much for the update. When you link the motion sensor directly to your device, does it control the device. I am having some intermittent problems with a new motion sensor as well. We do need to get to the bottom of this since it seems to be more prevalent that I had expected. With kind regards, Michel