dbwarner5

@Javi I have a favorites page, that has each item size set to 1. Whenever I first load the page it looks like this, with Wind Speed and Wind Direction taking up more than 1 space and pushing Gusts down below. Then after about 20-30 seconds, it correctly aligns. See second picture. FYI, Thanks.

Yes, you will need access to PGx to manage your NS. Sounds like you have tried quite a few things. Are you getting to a login screen for pgx? You should get one here: 'https://192.168.68.76:3000/login' (replace red address with your EISY address). If you have access to your AC, have you tried clicking on the NodeServers menu and at the bottom click on PG3? Your system may show slightly different words as I have not made the jump to 5.7 yet. See screen shot below. Also have you checked under Configuration/ Portals tab in the AC to see if the portal is online? Stick with it as the integration makes life much smoother than tying to program things through Alexa. If you continue to have trouble or someone else here cant help, you should open a ticket at UDI's website. Good luck!.

@Scott Korvek Scott I like the ecobee. works well, the ISY integration is great. Dont really use many of the features since I use the ISY to change temps etc. But we do rent the home at times so I do have a rental program that is local to the ecobee that was pretty easy to set up and I can initiate it remotely. I like that it also has fan controls to run the fan X minutes per hour to keep circulation up even when AC isnt called for.

If you stated goal was to prefer to be local vs reliant on the internet, then an inexpensive Z-wave like mentioned above should work well. If you aren't that interested in z-wave, there is already an ecobee NS and the cheapest ecobee https://www.amazon.com/Ecobee3-Thermostat-Wi-Fi-Works-Alexa/dp/B01K48T09Y/ref=sr_1_3?crid=2PJOTZ7UEUQ75&keywords=ecobee&qid=1695418818&s=home-garden&sprefix=ecobee%2Cgarden%2C136&sr=1-3 would also work via the ISY. I use both, local Z-wave Honeywell at my main house, ecobee at a second house, that the ISY located at the first house controls.

Makes perfect sense. I forget about folders in the tree. Use them extensively for programming, but not there. Put all the services and hub into a folder. Renamed all the door openers to logically fall in their right place on the tree; Garage Doors, Pole Barn Doors, Vacation home Garage door. thanks!

@Goose66 Thanks for fixing hte MyQ load balancing issue. A new question for you: I have 10 Nodes that show up in my AC: -1 Node for the Service -3 Gateways Nodes: (hub at house 1, Opener-hub at house 2, Opener Hub house 1--> new as a replacement -6 Device nodes, all Garage door openers The issue is that the Devices all show up under the hub they are connected to, each hub shows up as a node and then the service as a node and they end up scattered all over in my device tree. While I can group the devices under their hub, I cant organize the hubs / service to be together. Any ideas? I can move the one new garage door opener with hub at house 1 under the general hub at house 1 to get it back in line, but beyond that, I change the names so that they all are next to each other, but that is all. Thanks

Can you go to the program and Right click on it and select "copy to clipboard" and then post it? It would be helpful to see the whole program. thanks.

AWESOME!! Thanks @Goose66.. Updated, everything is working as it used to! Love this program. thanks.

I like the idea of searching etc. But I will stick to adding an LD at the end of the program name as to not change the alphabetical order of my programs when looking through them as groups etc. @btreinders great ideas... I only keep track of my disabled programs and a have a start up program that runs to disable them. Nothing else can run until that is completed. If needed, I can enable ALL programs, and then run my program that disables all of the programs that should be disabled. There is a danger to that approach of course of loops being created temporarily but with over 1000 programs, it would be a losing battle to try and keep track of all of them. I like your idea though of checking for enabling of a disabled program and shutting things down. I have had the infinite loop / bog down happen several times due to a program somehow getting enabled when it shouldn't be and it's a tough thing to stop / catch.

@BONeil having close to 100 programs that are disabled with another dozen or two that vary, so fyi I settled on the following nomenclature for my programs: -If it should be disabled, I end the program name with LD for Leave Disabled. Example: Deck Lights On LD -If it can be disabled by another program and sometimes stay in that state I end it with SD for Sometimes Disabled. Lastly, I have a startup program that I try to keep in sync with all my LD programs, where the program upon startup, disables all the programs I have labeled LD. I got tired years ago of trying to remember things ... lol.

Midwest.. Michigan. It seems to be hit or miss. sometimes it works, but the NS is reporting that it cant connect to the MyQ server.

Still hasn't resolved for me yet.. still getting these errors: myqapi:_callAPI: Network/server error in HTTP GET in _callAPI(): 403 Client Error: Forbidden for url: https://devices.myq-cloud.com/api/v5.2/Accounts......

It's funny how much we can learn to depend on the conveniences of home automation! @Goose66 if you need more logs or testing when you get back Wednesday, feel free to reach out.

I am too have problems with MyQ app.. getting errors like this: WARNING myqapi:_callAPI: Network/server error in HTTP GET in _callAPI(): 403 Client Error: Forbidden for url: https://devices.myq-cloud.com/api/v5.2/Accounts/xxxxx/Devices (account info replaced with XXX.) Restart gets me one or two actions before it stops communicating correctly. Password is correct as I checked it by logging out of the app and then logging back in.

Bob, fyi, I have been using the NS daily for about a month now. No issues.. is working great! Have been able to set up a folder in UD Mobile with my zones, volume controls, all offs, all ons.. great!! Thanks for porting this over from PG2 and making it even better! Doug

so if I want lightning data in the ISY, I should set up a second station as remote and it might pull it from the Tempest server? Thanks.

See below.. app shows lightning, lightning is happening, but NS doesn't show it. All other values match.

I have three technologies: Luma by Snap, RING, and an old Wansview camera. Understand ring wont work. Was able to get Luma to work, but not the Wansview... will keep trying. GREAT ADDITION!

@kzboray per Javi post, I think its pretty simple in that you can have your "toggle" program be as the following, and wehre it is DISABLED, and in THEN adn ELSe, just call your other program's Then, Else and eliminate the if there. This is an example of what I use for a Toggle. works perfectly. Set UD mobile to run the If. Replaced THEN and ELSE with Run Then Living Room KPS8 Lights Scene 1 And Run ELSE Living Room KPS8 Lights Scene 1 If you still need the other buttons as a trigger use control in that if statement. Rus Bedroom LD - [ID 0378][Parent 0377][Not Enabled] If 'RussoundCtl_1 / Bedroom Sound' Power is Off Then Set 'RussoundCtl_1 / Bedroom Sound' Zone On Else Set 'RussoundCtl_1 / Bedroom Sound' Zone Off

BACKUPS --> New lesson after 15 yrs with ISY. For years I regularly did backups, especially BEFORE any Firmware / Software update. What I neglected to do was a backup IMMEDIATELY AFTER any firmware / software update. Typically, I would wait until after I made some changes somewhere in the AC and then do a backup. This time, I almost got burned by that. I did the upgrade to 5.6.4 and then added a whole new line of programing related to the newly released BETA Russound NS. Then I did a backup...... IT FAILED due to a corrupt file. Yikes, hours of variables and programming down the drain? However through the awesome support at UDI and @Michel Kohanim, the corrupted file was replaced and I can do a back up again. Lesson learned.... always do a backup before and immediately after so you know it works, before you make changes.

@macbannai Glad you got it working.. one thing to note for future NS, I have found the blue banners can take a while to go away.. sometimes 5-10 minutes, or going back to the dashboard and then back to the NS. So I wouldn't worry about them initially if they are still hanging around after you have solved the issue it requested. Cheers.

I have had no problem with Hue NS and PGX. I am running version 0.1.11 The custom config has: bridges ["192.168.68.74"] I can't remember if the first time I had to press the bridge button. I also use resources to directly get to the Hues. But in My Lighting, I can control them via the NS.

Not sure either but after a third reboot, my IOX started going crazy. It turns out it enabled over 50 disabled programs so loops were generated and all hell was going on until I could systematically disable them all again.. All is up and running as expected for now. thanks!

Rebooted Pollisy.. all is working again. Now need to figure out what went wrong on Polisy......

It may be a problem with my Polisy as now the AC isnt loading properly.