waffles

Looks like you got yours to upgrade. How did you do it?

My Polisy only shows a solid LED on the left. Ticket created. Thanks!

As of a few weeks ago, Alexa is complaining that a "Device is unresponsive" after triggering a voice command for an Insteon device/scene on my ISX (Polisy). All commands are typically executed correctly and all seems to be working fine. I disabled/re-enabled the skill, but this did not help. Any idea what's going on? TIA!

My Polisy is Insteon only. Should this upgrade still work for it? I have done the "Launch the Admin Console, go to the Configuration tab, click on Update Packages. Warning, this might take a while depending on how current your OS is.." twice already with wait times of some 15 min in between, but no beeps or changes in the version number.

Thanks @Geddy; I had retried the refreshs but to no avail. Luckily I had an old csv file, even though a bit (out)dated. I had opened a ticket with UDI in parallel and there the conclusion is that it's really not possible that something wiped it out on the back end. I have no idea what caused it, so I am thinking it *must* have been a glitch in the Matrix . It's not the end of the world and I have most of it up and running again.

Thanks @MrBill; to me it seems more of an issue with the Portal/UDI side, as all my entries were gone. I have since started recreating everything. It's still work in progress; currently it looks like this:

The Device list with close to 50 devices I had set up over the years and was working fine and visible until about an hour ago is GONE all of a sudden. Alexa no longer recognizes the spoken commands. It appears it all got wiped out. The devices are still visible for spoken mapping. How can I bring it back? Thanks!

I was tempted to perform the test last night, but did not find the time. My system is fairly elaborate, so with this in mind, I might just hold off until I am forced to swap the sticks. (When I did the upgrade from ISY/PLM to IoP/USB it took quite some effort to get it all working again. I am sure most was caused by me taking wrong turns, but if I do not have to go through this ever again, I'd be happy.)

Thanks much @lilyoyo1!

As the title says.... Looking for some best practice tips what to do and also what NOT to do. I am using a 2448A7 already on my Polisy (IoP). Thanks!

I was wondering if it is possible to not only send 'plain' text, but emojis to Pushover with the Notification PS. (I know that Pushover by itself supports emojis.)

Thanks @Michel Kohanim. It's not urgent for me. I already implemented a workaround where the ISY tells my Crestron controller to send this WOL command And in regards to your question.. yes, otherwise we would not have this thread . In my case I use this WOL commmand to wake up a Synology NAS that's on my network every once in a blue moon.

I just found this topic after I ran into the same issue and started some troubleshooting/research: WOL no longer working after migrating from an ISY to the Polisy. (Neither the migrated nor a freshly created command in the admin console - WOL tab worked.) @Michel Kohanim, could you please post here once you guys have implemented a fix? TIA!

I got mine working again after I opened/updated/saved each one of them. Maybe there is a quicker way to accomplish the same.

Not sure if this is somewhat related, but I had run into major issues with my scenes/devices after the migration. In particular my keypads were affected, but 'simple' devices, like dimmers also. After lots of trial & error and banging my head against the wall, what ultimately did the trick for me was to factory reset/restore each of my Insteon devices.

I have a relatively elaborate Ubiquiti UniFi setup for my home network. One of the neat little features is to able to assign a stylized icon to each of the client devices on the network. There is a library to chose the icons from. However, I have found that if an icon is not already included in the library, one is pretty much of out luck to every see it added. From what I understand there is no end-user upload option for it). So it made me very happy when I found a icon for my Polisy. The nerdy geek in me gets great pleasure from things like that . So THANK YOU UDI for providing this icon to the library!

Thanks, @Michel Kohanim, that worked.

Still very new to Polisy.... I see this red message when I log into my Polisy: However, while I run an ISY on the Polisy, the IP address is incorrect. What am I seeing here? Also, shouldn't the ISY Version (5.3.0) of the Polisy/ISY install be displayed in the black area, which currently shows 0.0.0

According to Insteon: http://cache.insteon.com/documentation/2448A7qsg.pdf

Thanks @sjenkins . This is helpful. When I completed the restore back to the old setup (994/PLM-S) last night, all seemed to have gone OK - all devices seemingly got properly recognized in the Admin Console (, other than some battery powered leaks sensors that I will need to wake up separately.) However, I have since noticed that some of the scenes are not working properly, e.g. missing device responses, even though the Admin Console shows no errors. There must be something else going on. All was working great with the old set up before I started the migration. I am not quite sure how best to proceed from here.... BTW, I saw your location in the profile. Seems like we are neighbors

Quick update: I got my Polisy and the 2448A7 yesterday. Initially the migration seem to go smoothly until I ran into major issues: several of keypads are no longer recognized by the Polisy setup. It seems to work a little better when I connect the serial PLM, rather than the USB dongle. Even after several attempt with factory resets, restore ISY, restore modem, restore devices it is still BAD. For the migration to the Polisy I used a backup that I made right from my ISY994, running v.5.3.4. Polisy is running v.5.3.0, which I believe is the latest for it. I had done all the Polisy f/w updates before I started the migration. Has anyone faced similar problems and/or would have any suggestions on how to fix this? Somewhere along the lines I also lost the Portal access for the Polisy and I am waiting to hear back from UDI. In the meantime I have reverted back to my 994/2413S. Again, any pointers would be greatly appreciated!

Thanks Brian, so in short one should stay away (of possible) from everything lower than V2.3 - this applies to the serial, as well as the USB version, correct?

My understanding is that for its serial sibling (2413S) any version lower than 2 is prone to fail (mainly capacitor failures). However, this got remedied with version 2.x. and those seem to be going strong even after several years of use. I was wondering if there are similar considerations for the USB version (2413U), i.e. which version should I be looking for get? Thanks!

Found it: Switching browsers from Firefox to Chrome brought up a different view when I selected ath0, then showing the WiFi settings.

I am looking for the configuration page for WiFi for the Polisy Pro I just got According to: https://wiki.universal-devices.com/index.php?title=Polisy:User_Guide#Polisy_Configuration it should be here: However, for me it looks like this: What am I missing?