Skip to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

JSchumann

Members
  • Joined

  • Last visited

Everything posted by JSchumann

  1. JSchumann replied to JSchumann's topic in ISY994
    No, an outdoor light controlled by two 3 way switches....I want to put the micro behind the light. Any idea how to wire it ....need line and load then sense to the hot for the light?
  2. JSchumann posted a topic in ISY994
    I want a device that will sense when a light (has 3 way switches) is on or off and send a signal (controller). Would the micro on/off module do that? Can I hook one of the sense wires to the light (no connection to load terminals) to get the desired effect? Or am I doomed to put two insteon switches in my 3-way circuit? Regards, John
  3. JSchumann posted a topic in ISY994
    Is there a simple insteon device that will sense if a 120V unit is on or off? Thanks, John
  4. Well I had to see it somewhere? I use that and alert.control I know I saw them somewhere.....what other ones are there? Regards, John
  5. Michael, Where is the use of ${alert.action} documented? Looked in the wiki, no luck. I am currently using it but interested in what other options there are. Thanks, John
  6. LeeG, Figured it out. Did what you said and found out each of the 7 has it's own number. So when I put that number in the message, that is the one sent. I wanted the message to send the notification for the node that tripped. What I had to do was change the message from: ${sys.node aa bb cc 1.name} to ${sys.node.#.name} The # pulls in the tripped node and sends it in the message. Thanks
  7. Well some progress. The ISY links table does show a 1 (aa.bb.cc.1), so I put it in the customization. Now the message shows the node number and the word Smoke (when I press Test). I was hoping that the appropriate of the 7 names would show up Test for Test CO for CO and so on
  8. LeeG I saw that in the Wiki, but the ISY only shows format aa.bb.cc in the Main tab.
  9. Just installed Insteon Smoke Bridge. I have a custom message as follows: ${sys.node.aa bb cc.name} This should send whichever of the 7 node names that is 'on' in the message Node examples from main page aa.bb.cc-Smoke aa.bb.cc-CO aa.bb.cc-Test and so on What I get is: node[aa bb cc] and 'aa b' is blue and underlined the rest of the text is black Any ideas how to fix?
  10. LeeG - Every time I try to use new Insteon Device I get cannot determine Insteon engine. If I click start linking - and press the button on the new device, it hooks up every time.... Maybe I am missing something?
  11. What icon on the screen are you clicking to do the add?
  12. Jnaiser60, what detectors are you using, outside and inside?
  13. Exactly how are you trying to add the device?
  14. Was getting this error when trying to add a device..... Took a while but I went to the manual and figured out I needed to press the double round arrow icon to link.....was using New Insteon Device (light bulb icon) to try to add... Hopefully will help someone else who may be having the problem Regards, John
  15. OK, got it to work. Had to pick ATT on the dropdown box.......Thanks! Shows my e-mail address on the text now.
  16. mms.att.net doesn't seem to work........
  17. JSchumann posted a topic in ISY994
    I have texts sent to my phone on events. Was on Verizon, they all came from the same ' return number' and were all on one thread. Now switched to AT&T and each text comes in with a sequential return number (incremented by 1) so different thread for each text. Any idea how to remedy? Thanks, John
  18. I would like to have it open / close water valves when needed -->> reduce chance of leak with hose burst. Going to get the wiring diagram for my washer and see where I can tie in a relay.
  19. OK, I added an access point but it doesn't show up in ISY. I tried start linking and new Insteon device, netiher adds the device to the ISY Main screen... John
  20. JSchumann replied to JSchumann's topic in ISY994
    Thanks Brian, That box was still checked....so I fixed that too. John
  21. JSchumann replied to JSchumann's topic in ISY994
    OK, it took a bit of research, But I got Java disabled in my browser, ended up having to edit the registry. The second link in you other post needs a i after the 99 to work. So do I just leave the ISY finder box open while I am in Admin? It has a line with my isy address in there already, so I assume I don't need to add. Should I just cancle it? Now Firmware shows 3.3.8 and UI shows 3.3.9 Here is the link I show now for my desktop icon.... C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://isy.universal-devices.com/99i/3.3.9/admin.jnlp "C:\Users\John\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\42\754abf6a-7da699e1" Thanks, John
  22. JSchumann replied to JSchumann's topic in ISY994
    Stop, meaning get the isy finder pop up box to stop opening every time I open the admin console. I flashed to 3.3.8 then used the link listed under step d as recommended in the post. It creates an icon on the desktop and when used opens the isy finder popup box and admin console. Of interest it lists firmware as 3.3.8 and console as 3.2.6 under help | about. Also, I tried creating a shortcut with "http://isy.universal-devices.com/99i/3.3.8/admin.jnlp" and when used it also gets the ISY finder pop up box, admin console and ALSO open Internet Explorer view and track your downloads box. Right now I am using the automatically generated icon with properties "C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://192.168.3.66/admin.jnlp "C:\Users\John\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\60\2cee973c-4ec43382" and it seems to work. No pop up isy finder and firmware and console both say 3.3.8, BUT the icon regenerates and goes in the bottom left corner of screen every time I launch. Thanks, John
  23. JSchumann posted a topic in ISY994
    New Install, When I start Admin Console, I get 'ISY FINDER'. I click add and enter ISY address and it creates an icon on the desktop. After I close ans start again, it comes back again....not sure why? How do I get it to stop? Also, the icon it creates has a target a mile long with a reference to Java 6 and I have Java 7 installed.... Some things just don't look right. Thanks, John

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.