Jimbo.Automates

I had asked on their support if the cloud server was required a long time ago and they had said it should not be, but I can't find that information anywhere, so I have asked him again. But, if @MrBill says there are issues, I would believe him. I saw there were issues with their server last week, but it didn't seem to affect the nodeserver for me. I too wish there was a better zwave or zigbee option that talked directly to the ISY, but I've not found it for even simple temperature monitors, everyone I have tried has issues.

Don't worry about that, it's a tiny amount of data IMO, the only way is to have the ISY monitoring Rainmachine and Flume, then have it send a notification. It'll be a lot of programs but after getting one to work properly creating all the others would be simple. You could use the Notification Nodeserver to send push notifications with the Pushover service. If there are enhancements needed to Flume, just let me know. My program was very simple, if we were not at home and a water was being used, and Rachio was not currently watering then I got a notification. This worked well for me since I was trying to catch a stuck sprinkler valve or broken or leaking pipe inside or outside while we were traveling, since it always seems to happen when we are gone... I did want to make it smarter, but not an option now without a major plumbing change.

Yes, what you want can be done with the Flume nodeserver, I had a rudimentary method I was using with Rachio and Flume before my water company replaced my meter with one that doesn't work with Flume. Also, you can use the notification nodeserver and Pushover to get push notifications. Sent from my Pixel 6 Pro using Tapatalk

Yes, it all works locally, please use my referral link as mentioned on GitHub https://github.com/jimboca/udi-wirelesstag-poly if you plan to purchase. Currently the leak sensor is not supported but will be added after I update it for PG3, which should hopefully happen soon when I find some time. Sent from my Pixel 6 Pro using Tapatalk

Is there system defined hex codes? I just referenced codes from some web. Ya, I didn't think about loops, but seems it should just pick first match. Probably don't need null of that helps. Will there be a way for nodeserver to specify default colors for values sometime in the future? Also noticed the node value changes to a number when you view it after creating for an enumerated value. Sent from my Pixel 6 Pro using Tapatalk

Color options are awesome!! But typing in a hex color is kind of painful Also would like it have a 'If value not equal to' option.

I've been meaning to test that as well. [emoji20] Also hoping program name can also be used? Sent from my Pixel 6 Pro using Tapatalk

I've also asked for the ability to only charge for big updates, instead of having to pay every month or year when fixes are not needed. Sent from my Pixel 6 Pro using Tapatalk

I'm working on converting mine, but it's slow going, especially since I've been deep in the midst of converting PG2 kasa to use the newly released library which has been a lot more difficult to complete, and may need to push off those changes to PG3 version. Sent from my Pixel 6 Pro using Tapatalk

If system busy is constantly showing then it may be trying to write changes to wireless devices. Turn that off and see if it helps, also check the status to see exactly what it's doing to keep it busy. Sent from my Pixel 3 XL using Tapatalk

No worries, I was just giving you a hard time, no hard feelings from me. Sent from my Pixel 3 XL using Tapatalk

@Javi Just want to +1 adding back ability to see grouped nodes. Even if it's collapsed by default. But keep the node commands above it, previous release had node commands below so would occasionally have to scroll down a lot to see them. Sent from my Pixel 3 XL using Tapatalk

I've replied on the other thread about what to do about the Ecobee issues. And @Geddy assumptions are correct, PG3 will only be supported on Polisy, and PG2 nodeservers have to be updated to work on PG3, and most developers will likely eventually stop supporting the PG2 nodeservers.

Yes, if you use Polyglot and install both the ELK and Harmony nodeservers. Sent from my Pixel 3 XL using Tapatalk

Well, I know I'm not that active on forums lately, and deve of nodeservers has slowed all due to work and life, so I guess that excluded me [emoji16] Sent from my Pixel 3 XL using Tapatalk

Not sure about the -b option, must not have the latest Netcat available on Polisy? Hopefully @Michel Kohanim can help with that. This works for me, but have to cntl-c it to get out: nc -u 192.168.86.255 50223

I think it may be an issue that freebsd doesn't allow that as the broadcast address. I had this issue in a nodeserver when moving to Polisy, I'll look it up in the morning when I have time. Sent from my Pixel 3 XL using Tapatalk

Right, what I really meant is should I move my current PLM over and use with Polisy or get a new USB one? I guess either way I need them eventually so may as well get them. Sent from my Pixel 3 XL using Tapatalk

So is it recommended to move to USB PLM for ISY on Polisy? My current PLMs are likely near end of life so was going to buy new ones with current sale so could just get USB ones in preparation for the move? Sent from my Pixel 3 XL using Tapatalk

Nothing needs to be changed for the HE nodeserver after changing the port, I changed mine and everything still worked after a minute or so. The users, like Harmony Hub send out broadcasts and NS responds telling it what port it's using.

The latest version of the HueEmulator allows changing the port number, just for this reason. Previous versions allowed you to set it, but it didn't actually work.

Now if we could get the program name many of us would be very happy

Sorry again, the lag issue is still there 0.83. Opened favorite with widget and couldn't select any folder for many seconds. Sent from my Pixel 3 XL using Tapatalk

Sorry, I wasn't on 0.83 yet, so far the lag issue seems fixed after updating this morning. Sent from my Pixel 3 XL using Tapatalk

That's awesome! [emoji16] Sent from my Pixel 3 XL using Tapatalk