TheWabit

So that didn't work. After someone opened the garage door the 5 minute timer started - but then it started to close, stopped and opened back up. Guess I better rework that program. Thanks!

I had an interested observation last night I have 2 programs - one to turn the light on over the island when someone comes in the door from the garage and one that that turns all lights off at midnight (both below). (This is 2nd of 2 programs. The first one just sets the conditions) If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Disable Program 'Mud Room Light Up - 1' Set Scene 'Island' On Wait 15 minutes Set Scene 'Island' Off Enable Program 'Mud Room Light Up - 1' Else - No Actions - (To add one, press 'Action') --------------------------------------------------------------------------------------------------------------- If Time is 12:01:00AM Then Set Scene 'All' Off Else - No Actions - (To add one, press 'Action') (this scene includes the Island light) So someone came in the door about 11:55 (started the 15 minute timer). At midnight, the "All Off" command was sent and all lights went off EXCEPT the island light. My question is: programmatically, why is the first program above overriding the 2 nd one? Or should I be looking at some other reason? Thanks for the help!

Thanks! My goal was that if the door was not closed by this time - it will close (after 5 minutes). My thought was that even if someone opened the door between these times, it would trigger the 5 minute timer and then close after that. ? After I open or close the door, my relay changes to "off". and when my door is open, my sensor shows "on". So based on what Oberkc said - it should work. Just not as sure about the 5 minute timer IF the door is opened manually. I will try it tonight.

Hi Folks! Will this work or is there a better way? If On Sun, Mon, Tue, Wed, Thu From 10:30:00PM To 6:00:00AM (next day) Or ( On Sat, Fri From 11:00:00PM To 7:00:00AM (next day) ) And Status '19.5C.D1-Sensor' is On Then Wait 5 minutes Set Scene 'Garage Door Relay' On Else - No Actions - (To add one, press 'Action')

If I already have 994i, will a Firmware upgrade to these features or do I need another box?

Ahh....that makes sense. Thanks!

So here is an update and answers to some of the questions I have read. The jumper is not on. Everything seems to be working correctly. Although - I tried to "stop" the program via the drop down menu during a cycle to do some more testing without having to wait the 15 minutes. Actually, I was going to change it to 10 seconds for testing. I brought everything back to "idle" on the summary. But when I tried to test again, it didn't light up (so even though everything looks "reset", is the timer still running therefore not letting program 1 work yet?). Also - someone asked about dimmable switches. These NON-dimmable ICON switches. Finally, now I want to get fancy. If I want to interrupt the cycle with the switch. What is additional programming language?

I did not move any jumpers. But for the last 2 hours of testing, it appears that waiting a very short period of time between openings causes that issue. I waited about 30 seconds the first time when I reported back that the light didn't work. But I tried waiting 5-10 minutes between attempts and it seemed to work fine. I think this will work but I am just curious what in the programming is causing it not to repeat the desired result when only waiting a short period of time. Thanks for all the help!

The results are interesting - It worked the first time (had it set for 10 seconds), turned back off in 10. When I open the door subsequent times. The light does NOT turn on...

Thanks Stu - Let me get to work!

The program was saved. But now - the Triggerlinc does not turn the light on anymore. Frustrating

So this is what I have now. I had the same result. Although I did notice that in you program above, the "And" and the ( are on separate lines. Would that matter? And if so, how can I separate the two? If From Sunset To Sunrise (next day) And Control 'Triggerlinc' is switched On And ( Status 'Island (Kitchen ICON)' is Off Or Status 'Island (Mudroom Door ICON)' is Off ) Then Run Program 'Mud Room Lightup - 2' (Else Path) Else - No Actions - (To add one, press 'Action')

So it doesn't seem to work. Here are the programs: Program 1 If From Sunset To Sunrise (next day) And Control 'Triggerlinc' is switched On And Status 'Island (Kitchen ICON)' is Off Or Status 'Island (Mudroom Door ICON)' is Off Then Run Program 'Mud Room Lightup - 2' (Else Path) Else - No Actions - (To add one, press 'Action') Program 2 If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then - No Actions - (To add one, press 'Action') Else Disable Program 'Mud Room Light Up - 1' Set Scene 'Island' On Wait 15 minutes Set Scene 'Island' Off Enable Program 'Mud Room Light Up - 1' The Triggerlinc turns the light on, program 1 disables, program 2 shows a "false" under status for the "if" (which would be normal from what I read). But after 15 minutes, the light stays on and nothing changes on the "details" tab (Program 1 is still disabled, etc)

Disregard - I checked the documentation and understand what false means. Now I am waiting to see if after 15 minutes it goes off. I will update.

So - should it be true to be working correctly? It does show "false" in the status under "summary"

I am sorry - I don't know how to capture the thumbnail but it is the document symbol next to the program name that is all red. When you go to "summary" in "activity", it says "running else". but it is stuck there because it has been way longer than 15 minutes and the light did not go off.

So when I run this (open the door with the Triggerlinc), the light comes on, I check the program and "Program 1" has circle with a line through it and "Program 2" is all red. What would those mean?

Thanks Apost! My only question is since I have 2 ICON switches for that light in a 3-way situation, do both switches need to be in the "if" in program 1?

Stu's answer reminded me why I put that line in there (realizing now that it doesn't work). It was because if it is already on, obviously someone selected the switch on. So I didn't want someone to come in the door and set a timer for 15 minutes and it go off when someone obviously wants it on. Any way to accomplish this? thanks!

Hello, I cant get this program to turn off the Island lights after 15 minutes. Checked the Summary - doesn't say "running then" either. Any ideas? BTW there are two ICON switches in a 3-way situation for the Island Light. See below for program details: If From Sunset To Sunrise (next day) And Control 'Triggerlinc' is switched On And Status 'Island (Mudroom Door ICON)' is Off Then Set Scene 'Island' On Wait 15 minutes Set Scene 'Island' Off Else - No Actions - (To add one, press 'Action')

disregard - I figured it out. I was using the wrong address to get into the console.

Hi Guys, I haven't been in it for awhile but I was adding another switchlinc and when I am in the console, the authentication box keeps coming up about every 5 seconds requiring a username and password. Any thoughts? Matt

Lee, Thanks for the help. The scenes I have set up do have the KPL buttons and the remotelinc in the them as controllers. I restored the device 2 more times and everything seems to be working normally now.

Ok - so I looked at the link table. It has 14 lines. Some of the buttons have multiple lines. So first question - how do I see each KPL buttons address to make sure it is in link tables?

Lee, I am sorry, I am fairly new at this. Most of what you said made my head explode How con I view the link tables to see what is going on per your recommendation?