garybixler

From this post time where I did the send to when the email arrived was about 30 minutes.

Just checked my email and they did show up. Just took a long time.

That's odd. When I did this before it was just sent to my email. But I do see now that they are requesting an email for verification.

I installed using the device codes that can be downloaded from Global Cache. Just copied and pasted into the node server. Commands that I wouldn't use I just didn't copy paste. Was very easy and has been performing great. Thanks Gary

@Goose66 Hi, I just installed Bond Bridge under PG2 and the Bond Bridge node came right up. Then I did a power reset for discovering the addition devices and they all came up. Something about Bond running on PG3. Thanks Gary

I'm sorry but I don't see any discover button on the PG3 Dashboard just all the node servers. Could you be more specific? However I am adding static values so I didn't think a discovery would be necessary just a restart. But the bridge pro node doesn't show up in the Node Server. Is there a port requirement? I am using the POE Ethernet port. Thanks Gary

@Goose66 Hi, I just received a Bond Bridge Pro and can't seem to be able to get it loaded into the Bond NS. No nodes show up on the NS. Bond Pro 2.19.12 Bond NS 3.0.9 PG3 3.0.56 My NS config: also added Log. Thanks Gary EDIT The other thing I noticed was that there is no discover button on the NS that I could find. I tried restart instead after power cycling the Bond Pro but 0 nodes are loaded. New Text Document.txt

Any grid based solar panels with Enphase micro inverters?

The specs just say it can cover 2500 sq. ft. and the pro 3500 sq.ft. Just testing with the remote I am able to control a somfy blind 45+ ft. away between floors.

The bond bridge looks very promising. I think I will go that way. Probably with the pro version because of the direct Ethernet POE connection.

Hi Hi, Just wondering if there would be any interest in creating a Somfy node server on PG3. I think the info can be found here: somfysystems.com/en-us/somfy-synergy-api Thanks Gary

In the custom configuration parameters it doesn't look like the host parameter is pointing to the IP address of the ELK M1 EXP. Example: 172.16.1.xx:2101

When I went back to PG3 5.0.46 from PG3 5.0.50 I had to reinstall the ELK NS for it to work again. All other servers worked fine. Everything worked fine again after upgrading to PG3 5.0.51 from PG3 5.0.46 including ELK. In my case I reinstall the ELK NS. Certainly not the best option.

Having the same problem after 3.0.50. Submitter log for ELK wich is having the same problem.

@JimboAutomates Unfortunately after upgrading to PG3 3.0.5 ELK and Wireless Tag NSs among others come up with errors and won't run. Thanks Gary ELK log attached New Text Document (2).txt

Using a browser and hovering over the dBm value it will show TX power. Don't see it on the app however.

Thanks @JimboAutomates I was able to add back the leak sensor and all works great now. There is one unimportant issue. The Tx power on the Admin Console doesn't match what is shown at the tag web site. The AC value is roughly doubled plus. Thanks again. Gary

Do you have port forwarding set up for the ISY through the router?

Not sure where that update would be. Is it the parameter 9 in the advanced config of the ZEN?

Yes you are right. It is a secondary button. So far they seem to work (lit up) only with other Insteon devices set as controls in a scene. Thanks Gary

I have a question on the way a scene acts that has an Insteon button of an 8 button switch and a Zooz ZEN 71 on/off switch. Both are controllers. When the Insteon button is pushed on the ZEN switch responds with an on and the opposite with an off. All good. But when the ZEN switch is turned on which shows up in the scene as on the Insteon button isn't turned on (lit up). I just assumed that the ZEN would also turn the scene on. I did a work around with a program that will turn the scene ON/OFF with the ZEN switch status. All works as I like but just curious about the scene control differences. I'm guessing that because there is no link between the Insteon and ZEN is the problem. I just thought that the ISY would turn on the scene between two different devices. Thanks Gary

Try control instead of status.

Was wondering if there might be a Z wave connection map available at some time in the future. Would be great to visualize the Z Wave network to determine if and where a repeater might be needed. Also to see a device's neighbors. Thanks Gary

Yes I forgot to mention that I use the browser for device management but need to go to the app for routines and such.

I'm wondering if the difference in disabling and reenabling the skill might be if it is done through the app or a browser. I used the browser and didn't lose any routines or devices. I did need to add the devices back into the routine and enable the routine.