lilyoyo1

This is how mine is set up

I use programs for my assistant control. I only control 1 light in a room which is the main light. I turn on the light I use mostly and the off turn off whatever is on. For example, in the kitchen, I use my can lights mostly. Saying turn the lights on will turn them on. If I say turn off the lights it will turn off whatever is on. It could be the sink lights, island lights, breakfast nook etc. Doesn't matter. It'll turn off. The same applies for any room. In Alexa, it's named Light. The same applies for fan. Every room is labeled as fan. I do have the exact room as secondary phrases but the main name is fan. This is for each and every room. Each speaker is in its individual room along with each device. With this setup I have not had any issues with turning something on or off

I did a few posts above. i'll add that each speaker is located in the individual rooms as well

It works with both. I have it working with fans and lights for each room. Regardless of room, I simply say turn on the lights (or fan) and it does it for that room only

I would work with Wes at mobilinc to try and fix the problem vs putting a band-aid on something that could potentially cause more problems than it solves. If your still want to go down that path, the easiest way would be to get a cheap wifi switch AMD plug the isy into that. Then you could use their app to turn on/off

Yes, Cree still makes bulbs. They've expanded their lineup. I can't speak on Canada but HD still sells Cree in NC, Va, Fl and CA. I'd say the states but those are the only states I've bought bulbs in and saw them in stores.

I like Cree bulbs... Just not with insteon. When they work, they work really well and can hang with the best of them. However, your experience will vary. I've gotten to the point where I just want to buy a bulb and be done with it. With Cree, you have to test otherwise you can get buzzing, flickering at different points,. Etc. With the amount of warm glows I've installed (different types) I've simply not had that issue. I still test of course to avoid surprises but I am able to buy with confidence. No one beats warm glows dimming effect. All things being equal, at full brightness, Cree seems better but not so much better where it's worth the hassle. When using the 2wire with less, you will have many more performance issues. It simply wasn't designed to work with leds. While people have successfully used them with LEDs, it's something you'll definitely want to thoroughly test before investing in new bulbs

Everyone knows about nodes servers. How could anyone forget?! The op didn't ask about what 5.0 brings overall over 4. He asked specifically about the zwave updates and how it impacts insteon going forward. I tailored my answer specifically to the question that was asked.

I agree completely. I've seen where they've helped some and others it broke compatibility. I haven't seen any where they've "added" useful features

Outside of a few device additions and bugs, most of 5.0 has been about zwave overall. Until insteon releases their new line, I doubt anything (outside of bug fixes or insteon firmware updates), will actually be about Insteon directly. Since all zwave changes happen with the zwave board, if you dont have a board or zwave devices, most likely none will impact insteon

Thats what im referring too as well. As time has gone on and theyve added stuff, the more work that has needed to be done by then end user. As they go deeper into certification, this most likely will become greater as the gap widens

The 500 series is a suitable replacement for the 300 series. While you may need the external antenna with your current situation, you could also purchase a plastic door for your cabinet instead of using metal. That would allow you to use the internal board. When one is going through issues, problems seem bigger than what they really are and the grass seems greener on the other side....until you get to the other side. Sometimes though you have to jump the fence to find out for yourself. As someone who has used multiple hubs (and still continue to test from time to time), the ISY is still my go to hub. It's obviously far from perfect but once you get down to the nitty gritty, there's a reason why so many here haven't jumped ship to hubitat, HA, Smartthings, homeseer, and whatever else is out there. If anything, they'll use other systems to supplement what they are doing with the isy but overall the isy is still king for them. Regardless of what you use (in general, not you personally), all products have an EOL. I don't think UDI tries to be supportive due to shortcomings. I think they truly believe they have something great to offer and want to support those who have been willing to support them in their endeavors by purchasing and continuing to use their products. I say this often, had this been any other system, you would be stuck at 5.0.16 at the max with the 300 board. Most companies will force you to upgrade your whole system just to take advantage of UDI is doing for the cost of a board swap. Look at how many versions of homeseer, indigo, Smartthings, etc people has had to buy just to keep up with changing times! We complain because we are living through the changes as they happen at a minimal to no cost to us at all. UDI left alot of money on the table in support of it's users. They could've continued to sell the 300 series as is (up to 5.0.16c, certified the 500, change the pins slightly on the boards so it couldn't be backwards compatible and forced you into a new system (for full certification). That's how some companies operate. They could've released polisy with the isy (along with the 700 stick), and forced users to buy that outright. Instead, polyglot is free (without having to completely hack it) vs needing to make small payment for the rights to use it. I dont know if this changed your mind but hopefully the different perspective helps makes staying or fighting this battle a little bit easier to manage

I don't see the heavy lifting being reduced. If anything it's gotten heavier (due to the change out). 4.0 and 5.0 are simply that different

That's how alot of us got to where we are now with our choices

I agree with the Philips warm glow. While not perfect, I haven't seen the consistency across a product line like theirs. I wouldn't use hue for standard lighting. Besides the cost of retrofitting a whole house for them, it's not worth it overall for what you'll end up with once the novelty of changing colors wears off

@larryllix I guess another trying to get their post count up by copying you

Both. When using the insteon firmware, it doesn't matter whether the plm is disconnected, dead, or unplugged the Isy goes into safe mode

I've noticed this too after a reboot of either the router or ISY (mostly with Harmony). I think there's a handshake issue when the systems reconnect to one another

I've been using this node servers for a long time without having any issues with it (knock on wood)

I found out on accident once. I was pleasantly surprised. Subsequently Michel confirmed this in a post sometime later

The firmware doesn't impact insteon at all in regards to general use. Insteon would still work like normal while the plm is connected. The only thing the zwave only firmware did is prevents the isy from going into safe mode when the plm is unplugged. This would allow you to move your isy closer temporarily and add devices and move the isy back and hook up your plm like normal

Probably not. The issues you're reading about are with existing systems vs newer devices

Don't worry about topics causing debates. For me, debates are an exchange of ideas. Despite disagreements, both have pertinent points and the contradicting ideas only helps by given you multiple avenues to pursue a resolution. I generally look at any device more than 5 years to be older. Whole the protocol itself remains unchanged overall, there has been some enhancements added. Over the years, these enhancements add up enough to where the variables for operation can be different for the overall system. I wouldn't upgrade if things are working great for you (if everything is dual band). Minor issues can pop up with new and old alike. However, if you're using 10 year old devices such as the 2476, it's definitely worth upgrading. Cleaning your system is difficult and that hasn't changed much. The difference with newer devices are they are able to exist much better in a sub optimal environment. By default, I put filters on surge protectors/conditioners and power strips with multiple transformers plugged in. After that, I'll look at things on an individual basis such as microwaves and refrigerators which could potentially impact the system

You can run zwave without insteon. Simply use the zwave only firmware. Insteon will still work. Polisy has a wifi version which would allow you to carry it around. While that doesn't help you now, it will in the future once isy is ported over.