stusviews

Only statement that occur after the Repeat command are repeated.

Where did you find "Delete All?" Is the green light you're referring to in the portal between the UUID and Alias? Do you have the ISY Optimized for Smart Home V2 skill installed?

Can you add a device using New Insteon Device (light bulb icon)?

That reference is to an Echo Dot which is a 2nd generation device. The original Echo has not changed.

If power goes down, then the ISY can't send a message. If the ISY is on a UPS, the it won't power down nor be able to detect a power down. An external. battery powered device is needed. An I/O Linc and Open/Close Sensor can do that.

I use exactly that setup. The buttons (two garages) both control the garage doors and are lit if any garage door is open. Follow MWareman's advice, change the magnetic switch to one like this.

If the rest doesn't work, remove all the bulbs and replace one with an incandescent bulb. Any success?

Local http:// should be blank. Also, in Configuration, is the Https Port set to 443?

"Powerful speakers" is meaningless. What is the power (watts/channel)?

The most common reason for an Insteon device to be able to turn on a load, but not off is an incompatible load. What is the load, CFL, LED, transformer. incandescent, other?

What are you listening on? How have you determined that you hear only one channel? Is it the left or right channel that's missing?

Insteon compatible locks can be remotely locked, but do not report their status. Nearly any Z-Wave lock will accomplish what you want. I prefer Schlage, but Yale is popular, too.

The skill only has the ability to change the temperature. You can't change the mode nor turn the thermostat off. And if it's off, then you can't turn it on by voice.

Even if the speaker was mono, as long as you have a stereo input (i.e., left and right), you'd hear both channels.

Most single bluetooth speakers are stereo, but with both channels playing only inches apart, you won't experience much of a stereo effect.

Honeywell WiFi thermostats are not ISY compatible.

You mentioned ISY version 4.5.4. Is that the firmware, UI or both?

I don't see an iSimple skill for Alexa.

Try File, Restore Devices.

Yes.

Alexa can run Then and/or Else. If you want Alexa to run If, then you must invoke Izzy as in, "Alexa, tell Izzy to run program_spoken."

V5 is still in Alpha, not Beta. Things generally work OK, but not always. That's why v5+ has not yet advanced to Beta. It's suggested that you not install it if you critically depend on your ISY, for example, some you live with

Scroll to Instructions for using Multiple Echos Smart Home.

There's absolutely no way my wife could read an analog clock without numbers, even less so at a glance. Everything else the clock does is great. I kinda agree. I can glance at an analog clock and immediately see how much time I have for a two-fifteen appointment if it's ten-thirty. Much easier than seeing 10:30 and calculating the duration until 2:15.

The portal and network module have entirely different functions/uses.