asbril

Did you check whether the Kasa devices are still online in the Kasa App ? I have found that when a Kasa device is not working in ISY it is because the device may need to be reset in the Kasa App..

I don't really know whether it actually works but the message disappears when activated on my eisy with ZMatter.

I am not sure but I believe that "write changes" only works with ZMatter board. Are you using Polisy ?

Have you tried a restore ?

Earlier this morning, my PG3 showed a message that 3.1.23 is available : I did a PG3 restart and then PG3 would not log in again. Then I did a Upgrade Packages in IoX, but that did also not resolve the PG3 log in issue. Finally I did a power cycling of eisy and that resolved the issue. However, in IoX it still told me to Upgrade Packages and PG3 remains on 3.1.22. Furthermore, about 1/4 of my Zwave devices did not show a status. The status came back when I clicked query on each of these devices. This has happened several times before. Not a big issue but probably some kind of a bug. Everything is working now, but upgrading PG3 and/or IoX can be problematic.

Aside from @lilyoyo1's important link, know that currently Zooz is the best option for Zwave devices. In the past (and still occasionally) I used GE/Jasco, Inovelli and Homeseer, but now I find Zooz the best option. My experience is that some manufacturers don't get sufficient profitability from their Zwave line and then either abandon all together (Inovelli seems to have done that) or don't give good support. Who knows, that may happen to Zooz some day, but right now it is the best option.

My 2 Zooz ZEN 34 initially migrated well from Zooz/Polisy to eisy/ZMatter, but the related programs stopped working after update 5.5.6 . One of the two programs was easily resolved with IF Basic Control is ON (or OFF) but the second ZEN 34 just did not register clicks in eisy. The issue appeared to be that I was not able to "write" updates to the device, even though I set it to stay awake. Finally after numerous tries the updating worked and then the ZEN 34 responded. Weirdly one of the two has Scene nodes but not the other. I have noticed that with these devices the Synchronize Update with Interview can creates problems with nodes disappearing, so I won't try that again and anyway the programs do what I want, so no need for the Scene nodes. But weird that only one of the two has Scene nodes.

I use and like HA as well, but I find programming much more powerful with ISY. Having the 2 working together works for me.

I understand your frustrations. You are not alone in having issues with the migration to eisy. Michel and Chris are working hard at resolving the bugs and they have already made significant progress. In the meantime they spend hours or should I say days... in helping users resolving issues. As has been posted by others, UD ran into supply problems with Polisy and decided to move to updated and more powerful hardware, which is eisy. Hindsight is 20/20 and they should probably have waited longer with the roll-out. It is what it is and I have full confidence that it will all be resolved so that eisy becomes the stable environment that we are used to.

That did not work. Michel told me to press eisy button 5 times and that did it., though about an hour for all my Zwave devices to come back. Michel remote confirmed that update was complete, but I still get a message that I need to update. I will ignore that message for the time being.

I upgraded yesterday to 5.5.6 and this afternoon when opening the AC there was a message that there were new updates. I clicked on the Upgrade Packages. Now my eisy no longer shows in the IoX launcher. However eisy does work as I can control it through ISY Portal -ISY Web Access and the ISY Integration also works with Home Assistant. I cleared Java and downloaded "start" again, but no luck..... Nothing in the IoX launcher. BTW PG3 does work.

That is a better Valentine than the one from my wife

MY BAD....... I mixed up ZEN 32 and ZEN 34....

This is interesting. I do not having Scene nodes : I am up-to-date with IoX (5.5.6)

2b. Kitchen Remote A OFF - [ID 0017][Parent 000E] If '17. Kitchen / Wall remotes / ZY 149 SC Basic Control' is switched Off Then Wait 1 second Set '17. Kitchen / 1. Kitchen Ceiling' Off Else - No Actions - (To add one, press 'Action') Now it actually shows OFF, as it should. I do not have an option for FAST ON or FAST OFF : It works, so no worries

Thanks... That did the job.

When launching IoX from Lan I get : When launching IoX from cloud the Administrative Console opens normally. Where do I find the 5.5.6 AC ?

I agree 100%. All my new switches are Zooz.

You are probably right. I saved those instructions somewhere for if & when I goof up.

I am puzzled..... I have my Zooz ZEN 32 working with the main button (no load) to run a program which turns ON/OFF various devices. The 4 lower buttons each correspond to a different device with 1 click ON and 2 clicks OFF. It came over from Polisy with the migration. What puzzles me is that when I look at the lower buttons programs they do not seem to make sense : ON OFF Though here it only shows "switched" in the condition window of the AC for both ON and OFF it shows the same ON : I expected the control to be ON for ON and OFF for OFF, but apparently it is also ON for OFF. I would have to look up the manual, but maybe the double click is automatically OFF.

I have not tried as we were advised against doing this. I current have HA on a RPi 3 and (hopefully) soon on a Yellow Box.

I have had GE/Jasco switches for several years and generally I have no issues with them. In fact GE/Jasco and Zooz are my preferred Zwave switches, well before Inovelli, which often have issues.

I believe that one of the issues is that each ZWave manufacturer has its own properties. We have seen this problem with the eisy/ZMatter migration/upgrade and I'm sure that UD will take its time to make sure that the next firmware upgrades have been tested to work with as many different ZWave brands as possible.

The Include window remains open without a message and nothing in the event viewer beyond showing that Iox is in inclusion mode. Maybe the sensor has just gone bad.

Unfortunately no, I don't get any nodes. I tried exclude/include again and also put in a new battery. No luck.