tlightne

I am running Push node server and Ambientpoly on one RPI and the node servers show up on my ISY . As soon as I install Ambient weather on a second RPI I no longer see the two node servers from the first RPI on my ISY. I want the two weather polys on two different RPI for reliability purposes. What do I need to do to make this happen. I was running the Ambient weather on PGC but with that shutdown I have no redundancy.

I have Zwave Kwikset locks. Is there a way that you know of to be notified when a user unlocks the door from the keypad and which user unlocked it? I am a hardware guy never was a programer.. Thanks..

I upgraded from 4.3.7 to 5.0.16b everything looks good except I can not add a userid. I was able to change the admin password. Any hints??

I have not figured out why the sensor does not report closed status. The program does work I assume because open goes off when the door is closed. I have tested it.

Thank you Paulbates.

I have read the manual again and see multi-scene mode. However I am not using these as controllers. I have a program that sends me a notify when the door is open. What I would also like is to be notified when door is left opened for X amount of time. In my ISY the closed status is blank.

I have three door sensors programed to notify me when door is opened. That works without a problem. What I would also like is to be notified when door is left opened for a set time. Also I never see the door closed status report to the ISY. It is alway blank on the ISY... Should I see the closed status like on a leak sensor you get wet heartbeat and dry status. Thank you for any information.

Michel, Thank you for the information and quick reply.

I have a program set up for my ceiling fan to come on when the temperature it between 72° and 76°. I want the IF statement to run every 5 minutes. When I look at the summary page it shows next scheduled run time 11:00:00 pm. Should it not show next run time as 5 minutes later? All Fans On 73 - [ID 001B][Parent 0001] If From 9:30:00AM To 11:00:00PM (same day) And Module 'Climate' Temperature >= 72 °F And Module 'Climate' Temperature <= 76 °F Then Set 'Dinning Room / Dinning Room Fan' 18% Set Scene 'Living Room / Living Room Fan Low' On Set 'Bedroom / Bed Room Fan' 18% Set Scene 'Den / Den Fan Low' On Set 'Craft Room / Craft Room Fan-Motor' Low Else Repeat Every 5 minutes