tlightne

Ok thanks for looking into it. I am not seeing the issue with Ambient on PG2 just PG3 so I have my automation automatically fall over to the PG2 node server when the PG3 goes offline. I know you do not do anything with the Acurite node server I am also having issues with that as well I have opened a discussion in the Acutite group but have not had any response and it has been a couple of weeks. James Pauly is the developer of that node server. Thanks again for your quick response.

@bpwwer I have attached the debug log. I get a push notification when the node server goes offline and back on line. I went off today at 15:08 and back on at 15:09. I do not see anything obvious but what do I know. Thank you for looking into it.

@bpwwer I have attached the debug log. I get a push notification when the node server goes offline and back on line. I went off today at 15:08 and back on at 15:09. I do not see anything obvious but what do I know. Thank you for looking into it. AmbientWeather_5-5-2022_44833_PM.zip

@bpwwer Running Ambient Weather on PG3 I am getting parse errors. Sometimes it recovers within 1 minute with out any interaction on my part Node server goes offline and back online, other times I have to restart the node server to get it to recover. I am running Ambient Poly on PG2 with out any errors. Any suggestions? Thank you

I have a lightning sensor and two inside temperature sensors. The node server sees the lightning sensor but does not display lightning data just the temperature and humidity. It shows one inside temperature sensor but not the other. All show up on my Acurite Dashboard. It does show up in the list of Nodes when I look in PG3 but not on my ISY... Anybody monitoring the Acurite group??

@bpwwer I can confirm I was able to load Ambient Weather Node Server on PG3 and all is running as designed now. Thank you..

@bpwwer Thank you for the update. At this point I have the node servers I need running on PG2 so I will wait for a fix. Would that be the same issue I see with Ambient Weather Node Server? Thanks again for the response and assistance.

@bpwwer Ok so now am back to the original error where the Nodes never get created on my ISY. Node server starts then shuts down after 3 seconds. Attached it the log. Thank you EDIT: Removed file

Thank you for the response but where would one go to enter the correct user name and password. I am launching PG3 from my ISY.

UD Support connected to my Polisy to get everything running again, I have attached the PG3 Log file. I uninstalled and reinstalled the Ambient Weather Node Server with same results it will not start. I also installed the NOAA Node Server and it too will not start. Looks like PG3 has some issues. PG2 Node Servers run with no problems. EDIT: File removed

I am having other issues with my Pilosy as soon as I get those resolved I will get back into this problem. Thank you.

@mrbill I opened a ticket with support last night thank you for your help..

ISY is running and it also restarts..

Tried that with add getting not found. Tried with rest nodes and get site can't be reached. I can SSH into it using the ip address but it looks like the password has defaulted to admin. Tried to SSH with admin@polisy and get error could not resolve host name.

Tryed the add from launcher also and get error "NOT FOUND" It does show in Portal..

I upgraded from 5.4.2 to 5.4.3 and ISY finder can not find polisy. I pinged the IP address and it pinged with out errors. What is next??

I just installed Ambient Weather on my Pilosy from PG3 Node server store. I entered the API key on the configuration and saved it. I see the node server on the Pilosy but none of the nodes get created.

I just received my new Polisy and want to migrate my programs from my ISY994. I am also running node servers on RPI and want to run them on the Polisy. What is the recommended migration path? Should I migrate node servers to Polisy first then the ISY to IOP? I have a new PLM I would like to install on the polisy so that I can keep my ISY as a backup. Thank you

On RPI #1 it shows AmbientPoly as Connected and Ambient weather as unmanaged which I would expect to see because I only have the AmbientPoly installed there and it is Slot 1 on my ISY. On RPI #2 I have the AmbientWeather installed in slot 3 and it shows as connected. This is where it get weird. I had to install AmbientPoly on RPI #2 in Slot 1 before any AmbientPoly Node server would show in my ISY. I went in to the Node server profile for AmbientPoly and changed the IP address to RPI #1 and stopped AmbientPoly on RPI#2 and both node servers update their respective data. If I uninstall AmbientPoly on RPI #2 it disappears from my ISY. So I have to keep it installed on both RPIs for all to work.

I am running Push node server and Ambientpoly on one RPI and the node servers show up on my ISY . As soon as I install Ambient weather on a second RPI I no longer see the two node servers from the first RPI on my ISY. I want the two weather polys on two different RPI for reliability purposes. What do I need to do to make this happen. I was running the Ambient weather on PGC but with that shutdown I have no redundancy.

I have Zwave Kwikset locks. Is there a way that you know of to be notified when a user unlocks the door from the keypad and which user unlocked it? I am a hardware guy never was a programer.. Thanks..

I upgraded from 4.3.7 to 5.0.16b everything looks good except I can not add a userid. I was able to change the admin password. Any hints??

I have not figured out why the sensor does not report closed status. The program does work I assume because open goes off when the door is closed. I have tested it.

Thank you Paulbates.

I have read the manual again and see multi-scene mode. However I am not using these as controllers. I have a program that sends me a notify when the door is open. What I would also like is to be notified when door is left opened for X amount of time. In my ISY the closed status is blank.