tlightne

If you are not running PG3X there will not be an update path for Polisy to 3.1.29. PG3 3.1.21 is the latest version.

@theitprofessor I initially did the migration but one did not install all the nodes. I had to exclude it and include it with S2 before it would install all the nodes. Looking at them in AC they show S0 so I would say they are not using S2.

It comes with (1) external Zwave antenna and (1) Zigbee external antenna. The antennas are tuned for the proper frequencies...I believe it is a standard SMA connection..

Did you close the Admin Console and re login since you installed the Node server??

Upgraded without issue on Polisy from 5.6.0. Cleared Java cache, restarted Admin Console and logged in to AC. I did receive the popup telling me I needed to reboot. All is good...

I have three Kwikset 916 running Zwave connected to my Polisy and Zmatter board. They work with out issues. Polisy is 5.6.0.

@Sparks For what is is worth I have been using the Bond Node server for around a year running ceiling fans and I have not had any issues with the Node server.

@landolfi Are your ZSE40s reporting battery level?? Thanks

Add a device = Include Remove a device = exclude

Not a global Zwave lock issue. My Kwikset 916 Zwave locks all work with out issue...

@Jimbo.AutomatesGot it thanks...

How does one obtain a Portal API key??

Does ISY Portal show it online or offline??

@JSylvia007 You should not have any problems with Aeotec. I use Aeotec motion sensors and off brand open/close sensors with out any issues..

You should always do an exclude on any Zwave device before including. Even if it is new. Zwave devices can only include into one network and you never what occurred with your device before you opened the box..

There is a Keep Awake node where you can adjust the keep awake time...

I am having no issues with my ZSE44. Polisy 5.6.0... Zmatter board.. S2 security..

Open one of the programs with the error. Left click on any line in the program then click save. Close Admin console then reopen admin console and check the program you just saved. I found this to work with a few of my programs after an upgrade.

I do not believe you can activate a Smoke detector remotely but I am following this to learn..

Upgraded my Polisy to 5.6.0 today. After upgrade IOX Finder still showed Polisy as 5.5.9 and Admin Console would not open received socket error. Pulled power on Polisy waited a few minutes and Polisy rebooted. IOX Finder now shows Polisy 5.6.0. all appears to be working. PG3 did not upgrade as reported by @JTsao Mine is still PG3 at 3.1.20. Still awaiting for my original ZWAVE issues to be fixed with the First Alert Smoke reporting V1 alarms in numerical values and my (9) KAIPULE Z-Wave Plus Wireless Door Window sensors that when door is open it reports as On not Open in Polisy and when closed it reports as Off not closed.

What brand and type are the door locks?

@dpierre Are you willing to share them here in case someone else can use them?? If not now maybe in the future..

In your list of programs scroll down to the program you want to disable right click on it and in the popup you will see disable. Click on disable and it will disable to program.

The Eisy can not connect to the PLM with the ethernet port that is only for the network. Need a cable from UD to connect the PLM to EISY. https://www.universal-devices.com/product/serial-plm-kit/

The PLM is only used to communicate with Insteon devices not to Zwave devices. If you just changed your MAC os then I would suspect that is the issue. Did you clear your Java cheche and down load the latest Start.jnlp ??