tlightne

It is the same ID and password used to log into your Polisy/Eisy..

@Goose66 Installed three sets of Allen + Roth shades today and the Bond hub picked the up the shades with no issues also the Bond Plugin talks to them without any problems. My question it there are three commands in the Bond app Open Stop and Close. The AC only has two commands Open and Close. Can the Stop command be picked up by the Bond plugin?? Thank you

@KentinadaFrom experience not sure if it is in a WIKI someplace. I picked it up from reading posts in the UD Forums. A Zwave device can only be included in one network so if it was previously owned and returned by a customer or if Factory did a test on it and did not remove it properly it would still have the old network in it so it is best to always start with an exclusion first.

Did you do a factory reset or exclusion on the device before trying to include it. Tht is recommended even on new Zwave devices.

@Mike M I use Shelly RGBW2 controllers with generic strips With the shelly plugin. All works great I have not had any problems. Very reliable...

UUID sent..

@Javi Ticket opened...

Getting the following error when selecting My Notifications in UD Mobile. I open the app and select "My Home Connected" then select "My Notifications" it returns: {Successful":false,"errorCode"404,"errorName":"errorMessage":" This uuid is not an eisy uuid":"data":null} .404. I have verified my EISY UUID in portal. app version 1.1.53 also had the error with app version 1.1.41. Thank you

@TUhl01 I see it but that does not mean the developer is aware it is there. Not all developers babysit this forum. Just trying to help you out.

@TUhl01 Did you send the log to the developer?? That is the best way to make sure they get it...

@Kentinada I understand the concern with support. May be I will just stick with my Nest and wait to see if they open up an API again then a plugin... The Ecobee looks great also. Too many decisions..

@Kentinada I am contemplating the Honeywell T-6 Pro with Zwave to eliminate the need for a plugin altogether.

Power down, eject the SD Card and take a pencil erasure and clean the contacts on the SD card. Reinsert the SD card if the errors still appear replace the SD card with a high quality card.

@Goose66 I too am interested in a Nest Plugin.....

@cosyn Sorry I am not a coder of any type so I can not give you any advise on how to change your programs on Eisy maybe some one else will chime in. My only way would be to update each one at a time....

@cosynThis information is from the readme section of the plugin store for Timedata and may be contributing to your problem.... "There have been some changes made during the migration to PG3. In particular, some node ids have changed. This means that when using variable substitution, some updates to your Configuration/Customizations may be required. For instance, the "timedata" node was renamed to "controller", so instead of: ${sys.node.n007_timedata.GV5}, the script needs to be: ${sys.node.n007_controller.GV5}"

yes...

@dblee1950 Here is one example, I use temperature to set the speed of a ceiling fan in my bedroom at night. Bedroom Fan Off 65° AC On Ambient - [ID 009D][Parent 0065] If From 9:00:00PM To 9:00:00AM (next day) And 'AC Temps / Liv Rm AC Supply Tempature' Temperature < 70.0°F And 'Ambient Weather / main' Temperature >= 67.0°F Then Set 'Bedroom / Bed Room Fan Switch' Off Else - No Actions - (To add one, press 'Action') I also use rain accumulation to set irrigation on or off. Lawn Sprinkler On AM - [ID 00D5][Parent 0075] If On Sat, Wed From 4:30:00AM To 7:30:00AM (same day) And 'Ambient Weather / main' Rain (weekly) <= 0.750 Inches Then Set 'Outside / Lawn Sprinkler' On Else Set 'Outside / Lawn Sprinkler' Fast Off

@dblee1950 did you get your api key from Ambient and enter that into the configuration in PG3?? That is the only way it will look at your weather station. Once you get connected all your sensors will show up in AC....

@Kentinada You are correct I do not use the push plugin. I just do all my notifications with the Notification Plugin... Sorry about the confusion..

When you powered down the Polisy did you also unplug power and wait the 10+ seconds? If still not connecting then I suggest you open a ticket with UD support..

Yes mine do. Did you save it? Did you close AC and log back into AC?

I do mine in the AC by clicking on Configuration then emails/notifications then costume content. Be sure to save it when done at the bottom of the custom configuration tab screen.

You might want to add the Plugin Developer to this to get a quicker response. @Jimbo.Automates

@Ross To upgrade go to the PG3 dashboard and select plugin store and select the plugin you want to upgrade, click on install and then click on to reinstall here in the same slot.