UPDATE 10/2:

 

Our second online training and demo has been scheduled for Saturday 10/10 at 8pm Eastern, 5pm Pacific.

 

Target audience is the same as the last meeting - people considering purchasing the ISY and new users looking to get familiar with the ISY.

 

There will be a dial-in # available for audio (long distance charges apply).

 

Date: Saturday October 10, 2009

Time: 8pm Eastern / 5pm Pacific

Meeting URL: https://webmeeting.dimdim.com/portal/Jo ... al_devices

Optional Dial-In: 702-473-3463

Dial-In Code: 1234

 

Hope to see you there!

 

_____________________________________________________________

 

UPDATE:

 

Our first online training/demo is scheduled for this coming Friday (7/3) at 3pm Eastern, 12pm Pacific. I realize that we can't accomodate everyone with a single time/day, so we will vary our day and time for future trainings/demos.

 

There is a dial-in # available for those who want to connect in via phone (long distance charges apply). Otherwise, chat is on-screen or via microphone.

 

Date: Friday July 3rd, 2009

Time: 3pm Eastern / 12pm Pacific

Meeting URL: https://webmeeting.dimdim.com:443/porta ... al_devices

Optional Dial-In: 712-432-6139

Dial-In Code: 1234

 

Hope to see you there!

________________________________________________________

 

 

 

 

Thinking of purchasing an ISY for INSTEON? Already have an ISY but need some help getting started?

 

Universal Devices will be holding an online training & demo for the ISY line of automation & energy conservation controllers. This first session will focus on basic topics.

 

Some topics we'll be covering:

- choosing a location for your ISY and PLM

- basic setup and configuration of the ISY

- using the ISY to manage your Insteon devices, create links/scenes

- creating programs on the ISY

- using the IR receiver to trigger programs

- accessing your ISY over the internet

- troubleshooting INSTEON communication issues

- ... and more!

 

Information on the ISY is available here:

http://www.universal-devices.com/99i.htm

 

The training & demo will run approximately 1-2 hours, depending on # of attendees, questions, etc.

 

We're looking for suggestions on a time and day for the session. We are considering:

- weekday evening (9pm EST/6pm PST)

- weekend morning (11am EST/8am PST)

- weekend evening (9pm EST/6pm PST)

 

Please let us know your thoughts on a time/day, and also any particular topics you'd like to see covered. Feel free to reply to this thread, or email us at demos@universal-devices.com

 

Once we get some feedback, we will announce the time and date for the session and information on signing up.

 

Thanks!

Great idea!

 

I like to see "...and more!"

 

I think some examples/demos of actual uses would be good. Things like garage door control, irrigation, motion sensors. I know there's a lot of information on these topics in the forum, but interactive sessions where the details can be more easily explained, I think would be helpful.

Thanks for the feedback, Bob! I 100% agree, but think we should stick with the basics for the 1st session. Afterwards perhaps we can stagger sessions with different topics.

Mike,

 

I think this would be awesome and make our ISY that much better.

 

Thanks for offering this service.

Great idea. Weekday evenings would work best for me.

 

I am just getting starting with my ISY-99i and could use some help with a device naming convention. Also some examples how to get started with setting up a room with a KeypadLinc, a RemoteLinc, and some LampLincs.

 

Looking forward to the online training.

 

/Tom

Our first online training/demo is scheduled for this coming Friday (7/3) at 3pm Eastern, 12pm Pacific. I realize that we can't accomodate everyone with a single time/day, so we will vary our day and time for future trainings/demos.

 

There is a dial-in # available for those who want to connect in via phone (long distance charges apply). Otherwise, chat is on-screen or via microphone.

 

Date: Friday July 3rd, 2009

Time: 3pm Eastern / 12pm Pacific

Meeting URL: https://webmeeting.dimdim.com:443/porta ... al_devices

Optional Dial-In: 712-432-6139

Dial-In Code: 1234

 

Hope to see you there!

Just a reminder that the training starts in less than one hour. Hope to see you there!

Michael, Great Job.

 

I am looking forward to more of these!

 

Thanks again,

 

Tim

Thanks, Mike. I really enjoyed and learned from the session. Do it again!

 

Stu

Retired H.S. Teacher

Mathematics/Computer Science

Was this recorded for replay later?

I wanted to thank everyone who was able to attend the training/demo today. I think it went fairly well, even if I did lose power here and we were in the dark for a minute or 2!

 

We had a great turnout - at least 17 people attended (maybe more).

 

I'm not certain yet if we'll be able to make the recording available. Either way, I'm considering creating a series of videos that would cover the same topics that were discussed today. I'll post more info ASAP.

 

I'd also love to hear suggestions for future online sessions.

 

Thanks again!

Our second online training and demo has been scheduled for Saturday 10/10 at 8pm Eastern, 5pm Pacific.

 

Target audience is the same as the last meeting - people considering purchasing the ISY and new users looking to get familiar with the ISY.

 

There will be a dial-in # available for audio (long distance charges apply).

 

Date: Saturday October 10, 2009

Time: 8pm Eastern / 5pm Pacific

Meeting URL: https://webmeeting.dimdim.com/portal/Jo ... al_devices

Optional Dial-In: 702-473-3463

Dial-In Code: 1234

 

Hope to see you there!

Just a reminder that our online demo is today at 8pm EST. Hope to see you there!

Was this demo session recorded? I'm expecting my unit today and would love to watch the demo before I open the box!

Hi John -

 

Unfortunately not. We tried recording a previous session, but the quality wasn't there. I may try recording the next session, but we're also working on some short how-to videos that we'll have posted up.

Thanks for the quick reply.

 

Any plans on doing the demo again some time soon?

I hope to do one within the next 30-45 days. Please keep an eye on this thread.

When do you guys plan on having some type of ISY99 Insteon Training session or webminar? Thanks

Any where I could watch recorded trainings? Or are there any to be held in the future?

Hello rmlinnovator,

 

Unfortunately we do not have any plans. This said, SmartHome has regular training sessions all of which include training on ISY as well.

 

With kind regards,

Michel

Do you know yet when the next online training session will be. I'm seriously interested in getting completely away from SmartLinc and moving to the ISY994i. Anything I can learn about how to set it up and operate it as well as it's capabilities and interfaces will help. Thanks, Ritch

Hi Ritch,

 

Unfortunately we have not planned any more on line training. In the meantime, I am certain you will find our training videos as informational. And, you can always call us with your questions.

 

Please checkout the links under Instructional Videos.

 

With kind regards,

Michel

4 years later... are these demo videos ready yet?

NivRam

NivRam,

 

Did you actually click on the link?

 

With kind regards,

Michel