Techman Posted April 6, 2021 Posted April 6, 2021 2 minutes ago, SHM said: Did not unzip file either Did you update the firmware using manual upgrade from within the admin console Before the upgrade make sure that the UI and your current firmware are the same version. If so and you're still having a problem then delete the update file and download it again. Are you using a PC or a MAC?
SHM Posted April 6, 2021 Posted April 6, 2021 Solved by using the latest Admin console! Works great. No issues.
larryllix Posted April 7, 2021 Posted April 7, 2021 @Michel Kohanim The modulus function gives totally unpredictable results. In particular I am attempting $iVariable %= 0.05 It always clears the 2 decimals place value to 0.00 I have experimented with 0 decimal precision variables, using 5, 10, 100, and 1000. With 1000 I got a 700 resultant once which was correct. Lower divisors always resulted in 0 remainders. I also found one trial (but couldn't duplicate again) $variable %= 5 (23.47 %= 0.05 resulted in 2) giving a whole number resultant instead of the fractional 0.02 expected remainder Running ISY v5.3.2 (not the latest) Thanks! This will be messing up a few programs I use. I haven't checked them yet but most are just novelty usage 4 x 2 digit room number tracking in one integer variable. (n-1 x 100 + n)
ctviggen1 Posted April 25, 2021 Posted April 25, 2021 Yeah! This fixed an issue where one of my zwave ceiling fans was lost. I was finally able to find it and add it to the network. For zwave, what is the backup procedure? I know zwave, backup backs it up, but to where? Do I also need to back up to a file somewhere?
asbril Posted April 25, 2021 Posted April 25, 2021 (edited) 11 minutes ago, ctviggen1 said: Yeah! This fixed an issue where one of my zwave ceiling fans was lost. I was finally able to find it and add it to the network. For zwave, what is the backup procedure? I know zwave, backup backs it up, but to where? Do I also need to back up to a file somewhere? My understanding is that the dongle ("Zwave" - "Backup") backs up on itself or on the sd card, while your programs, scenes etc ("File" ISY backup" back up on your chosen computer location. Edited April 25, 2021 by asbril 1
stre1026 Posted June 26, 2021 Posted June 26, 2021 I upgraded to 5.3.3 and had an issue with my Z-wave door locks. For some reason, they stopped reporting user numbers so the programs that I had fire based on the user number unlocking the door didn't work anymore. I downgraded back to 5.3.0 and the problem went away so I imagine it might be a bug in 5.3.3? The program looks like this: Side Door - Alarm Disarm - [ID 0005][Parent 0003] If 'Locks / ZW Side Door Lock' User Number is 1 Or 'Locks / ZW Side Door Lock' User Number is 2 And 'Locks / ZW Side Door Lock' is switched Alarm Unlocked by Keypad Then Set Elk Area 'House' Disarm Set 'Kitchen / Kitchen Recessed' On Set 'Thermostats-Home' On Else - No Actions - (To add one, press 'Action')
WFP Posted June 26, 2021 Posted June 26, 2021 (edited) 21 minutes ago, stre1026 said: I upgraded to 5.3.3 and had an issue with my Z-wave door locks. For some reason, they stopped reporting user numbers so the programs that I had fire based on the user number unlocking the door didn't work anymore. I downgraded back to 5.3.0 and the problem went away so I imagine it might be a bug in 5.3.3? The program looks like this: Side Door - Alarm Disarm - [ID 0005][Parent 0003] If 'Locks / ZW Side Door Lock' User Number is 1 Or 'Locks / ZW Side Door Lock' User Number is 2 And 'Locks / ZW Side Door Lock' is switched Alarm Unlocked by Keypad Then Set Elk Area 'House' Disarm Set 'Kitchen / Kitchen Recessed' On Set 'Thermostats-Home' On Else - No Actions - (To add one, press 'Action') I think you need to update the program to use the "Access Control Alarm" sub node One of my Main Lock Nodes is ZW003_1 The sub node is ZW003_306 for access control alarm Note: I also think you need parens around the "or" statements if the and applies to both. As written, I think it only allies to user 2 /Bill Edited June 26, 2021 by WFP 1
stre1026 Posted June 26, 2021 Posted June 26, 2021 1 hour ago, WFP said: I think you need to update the program to use the "Access Control Alarm" sub node One of my Main Lock Nodes is ZW003_1 The sub node is ZW003_306 for access control alarm Note: I also think you need parens around the "or" statements if the and applies to both. As written, I think it only allies to user 2 /Bill Has anything changed drastically in 5.3.3 from 5.3.0? This program has been working perfectly fine as is for years.
WFP Posted June 26, 2021 Posted June 26, 2021 12 minutes ago, stre1026 said: Has anything changed drastically in 5.3.3 from 5.3.0? This program has been working perfectly fine as is for years. I would say yes since I had code for user numbers also that I had to move to the sub node.
jaydrosy Posted July 2, 2021 Posted July 2, 2021 On 6/26/2021 at 11:11 AM, WFP said: I would say yes since I had code for user numbers also that I had to move to the sub node. I can report I'm having the same issue but only since upgrading to 5.3.3. The user number used to be reported in the main node for these locks
lilyoyo1 Posted July 5, 2021 Posted July 5, 2021 (edited) 17 minutes ago, jwt said: Where in the F&%K do I download 5.3.3 without all the hash crap included. Instead of coming on here posting as you have, why not take a moment to actually read. Had you done so, you would've found it already. None of your attitude is needed, warranted, or desired. All the extra is there for a reason Edited July 5, 2021 by lilyoyo1 2
larryllix Posted July 5, 2021 Posted July 5, 2021 17 minutes ago, jwt said: Where in the F&%K do I download 5.3.3 without all the hash crap included. Read this thread starting from the beginning. What is hash crap?
MrBill Posted July 5, 2021 Posted July 5, 2021 11 hours ago, larryllix said: What is hash crap? I wondered that too. 11 hours ago, larryllix said: Read this thread starting from the beginning. The answer is so simple... they even have the correct thread.
lilyoyo1 Posted July 5, 2021 Posted July 5, 2021 1 minute ago, MrBill said: I wondered that too. The answer is so simple... they even have the correct thread. So simple yet no one ever does it.
DaveStLou Posted July 5, 2021 Posted July 5, 2021 12 hours ago, jwt said: Where in the F&%K do I download 5.3.3 without all the hash crap included. Possibly spam? 1
asbril Posted July 5, 2021 Posted July 5, 2021 12 hours ago, larryllix said: What is hash crap? It may disqualify you for the Olympics ? 6
DaveStLou Posted July 5, 2021 Posted July 5, 2021 31 minutes ago, asbril said: It may disqualify you for the Olympics ? Hash and spam is NOT a good combination either. 1 2
lilyoyo1 Posted July 5, 2021 Posted July 5, 2021 52 minutes ago, DaveStLou said: Possibly spam? It probably is. Popped in and disappeared just as quick.
larryllix Posted July 5, 2021 Posted July 5, 2021 1 hour ago, DaveStLou said: Hash and spam is NOT a good combination either. Not legal in Hawaii yet? 1 1
Teken Posted July 14, 2021 Posted July 14, 2021 Why doesn't the link work for the No PLM / ZS to download??? All of the links from 5.3 - 5.3.3 don't work.
MrBill Posted July 14, 2021 Posted July 14, 2021 8 minutes ago, Teken said: Why doesn't the link work for the No PLM / ZS to download??? All of the links from 5.3 - 5.3.3 don't work. You sure? I have 5.3.3 installed on my no-PLM ISY and i just downloaded the file again: granted I didn't try to install that file but the LINK to download works.
Teken Posted July 14, 2021 Posted July 14, 2021 10 minutes ago, MrBill said: You sure? I have 5.3.3 installed on my no-PLM ISY and i just downloaded the file again: granted I didn't try to install that file but the LINK to download works. Let me try this on a different web browser as Chrome just blinks when you select the link and nothing happens.
Recommended Posts