brians Posted September 26, 2022 Author Posted September 26, 2022 The upgrade looks trivial... its a mini PCI Express card and these just pop in with edge connector and some screws to secure to standoffs on the mainboard. Then mount the antennas on Polisy case and click in the antenna connectors onto the board. Since I have a Polisy already, and lots of Z-Wave devices, it is a no-brainer for me to upgrade to the Zmatter - especially with all the promised Z-Wave features; UD made it pretty clear that there is no more feature support for the Zooz dongle. The Polisy/Zooz combination will probably very soon become like the ISY994i with the old 300 series board where you have to use an older ISY firmware to make Z-Wave continue to work. This would explain why they offer to buy back your Zooz dongle, because it makes them less obligated from ongoing support. Of course, I could be wrong on all this, but since they are switching to new Z-Wave API I would not see them doing much more working on old version and having to be concerned back-porting new features breaking integration. Even if I was compelled to upgrade to an EISY in near future, I would still probably buy another ZMatter board for it. I would most likely re-sell Polisy, and having one without a ZMatter card would not make it as appealing to resell vs. a complete unit. 2
AnthemAVM Posted October 24, 2022 Posted October 24, 2022 Those that ordered, will they still be shipping in middle of November? Ready to ditch my ISY and go 100% Polisy. Thank you.
Techman Posted October 24, 2022 Posted October 24, 2022 The UD store website still shows shipping November 15th.
AnthemAVM Posted November 13, 2022 Posted November 13, 2022 @Michel Kohanim will the z matter be shipping this week for us that pre ordered? Thanks and really excited to move over all to Polisy. 1
larryllix Posted November 13, 2022 Posted November 13, 2022 @Michel Kohanim will the z matter be shipping this week for us that pre ordered? Thanks and really excited to move over all to Polisy. I don't think polisy and the z-matter board go together????Sent from my SM-G781W using Tapatalk
lilyoyo1 Posted November 13, 2022 Posted November 13, 2022 (edited) 6 minutes ago, larryllix said: I don't think polisy and the z-matter board go together???? Sent from my SM-G781W using Tapatalk They do. That's why it was on presale before eisy. It can also work with eisy. Edited November 13, 2022 by lilyoyo1
Techman Posted November 13, 2022 Posted November 13, 2022 17 minutes ago, larryllix said: I don't think polisy and the z-matter board go together???? Sent from my SM-G781W using Tapatalk The Zmatter board plugs into an internal slot in the Polisy and uses external antennas. For the eisy the same Zmatter board is mounted in an external enclosure with a USB cable that plugs into the back of the eisy 1
brians Posted November 14, 2022 Author Posted November 14, 2022 (edited) Can't wait... https://www.timeanddate.com/countdown/baby?iso=20221124T00&p0=5511&msg=ZMatter+Released+%3F&font=cursive Edited November 14, 2022 by brians
brians Posted November 14, 2022 Author Posted November 14, 2022 22 hours ago, AnthemAVM said: @Michel Kohanim will the z matter be shipping this week for us that pre ordered? Thanks and really excited to move over all to Polisy. I am guessing no, they just changed date to 24th on their site.
Michel Kohanim Posted November 14, 2022 Posted November 14, 2022 Hello all, unfortunately we had to change the ETA due to all the hoops we had to go through to get the units shipped. Currently, the shipment is in the Los Angeles area and scheduled to be delivered by 11/16 (DHL). We shall keep you up to date with all updates. With kind regards, Michel 1 2
brians Posted November 22, 2022 Author Posted November 22, 2022 (edited) Just got an email that is shipping tomorrow along with hardware installation instructions in the email. No indication yet how to upgrade ZWave for IoX... they say more instructions by Dec 1. 😂 Edited November 23, 2022 by brians 1
palayman Posted November 23, 2022 Posted November 23, 2022 (edited) Got notice that they were available in email. When I logged in to order it said some sort of discount was applicable if I logged in. Did that, but no discount. @Michel Kohanim Am I missing something? Best regards, Paul Edited November 23, 2022 by palayman
AnthemAVM Posted November 23, 2022 Posted November 23, 2022 I think you needed to pre order to get a small discount.
Michel Kohanim Posted November 23, 2022 Posted November 23, 2022 @palayman, Discounts are for developers and integrators. Also, we just paid 35% tariff on the shipment. It was quite painful ... currently, we barely break even. With kind regards, Michel 4
asbril Posted November 23, 2022 Posted November 23, 2022 10 minutes ago, Michel Kohanim said: @palayman, Discounts are for developers and integrators. Also, we just paid 35% tariff on the shipment. It was quite painful ... currently, we barely break even. With kind regards, Michel We all need to make up for you... 4
Michel Kohanim Posted November 23, 2022 Posted November 23, 2022 @asbril, thank you but there was literally no way around it. The shipment came from Russia, and when we started, there were no tariffs. With kind regards, Michel 2
palayman Posted November 23, 2022 Posted November 23, 2022 1 hour ago, Michel Kohanim said: @palayman, Discounts are for developers and integrators. Also, we just paid 35% tariff on the shipment. It was quite painful ... currently, we barely break even. With kind regards, Michel @Michel KohanimDidn't really expect one, but you might want to fix the landing page from the email that says you'll get one if you log in. Cheers, Paul 2
brians Posted November 23, 2022 Author Posted November 23, 2022 3 hours ago, Michel Kohanim said: @asbril, thank you but there was literally no way around it. The shipment came from Russia, and when we started, there were no tariffs. With kind regards, Michel Oh, hope you have an alternate source moving forward if cannot still get with that one.
oskrypuch Posted November 23, 2022 Posted November 23, 2022 4 hours ago, Michel Kohanim said: @asbril, thank you but there was literally no way around it. The shipment came from Russia... Holy Hannah! You need to find a new source! * Orest
Michel Kohanim Posted November 24, 2022 Posted November 24, 2022 11 hours ago, brians said: Oh, hope you have an alternate source moving forward if cannot still get with that one. Already have. With kind regards, Michel 3
oskrypuch Posted November 25, 2022 Posted November 25, 2022 And I'd prefer the non-Ruzzian units! 😉 * Orest
Recommended Posts