bradshawkyle Posted January 31, 2023 Posted January 31, 2023 Like the title says, I can't seem to get the Node Server to discover my devices. It's worth noting they're running the S1 app (not the newer S2) as some of my devices are 1st Gen Sonos. I have some ZP100's and ZP80's that still work perfectly at 15+ years. The devices are on wifi (not currently using the Bridge) and eISY is on the same 2.4GhZ network. I've tried reinstalling the Node Server and restarting eISY, along with clicking Discover in PG3 and in Admin console, and the Node Server shows connected in both places as well. Any troubleshooting tips would be greatly appreciated.
bpwwer Posted January 31, 2023 Posted January 31, 2023 If you can switch the eisy to a wired network, do that and see if it works. The way the wireless networking is implemented on the eisy breaks a lot of device discovery methods.
bradshawkyle Posted January 31, 2023 Author Posted January 31, 2023 I tried that first and ran into sone strange behavior. I couldn't access via Admin Console, PG3 disconnected, no UD Mobile, BUT I could see and control devices via ISY Portal. I looked around for a post explaining how to configure Ethernet and could only find instructions to "plug it in and wireless is disabled". And ideas how to resolve? If not, I guess I could back-up, factory reset, and configure eISY with Ethernet instead of Wifi. Seems kinda of extreme, though..... That said, I'm willing to go that route if I can get things working properly.
auger66 Posted February 1, 2023 Posted February 1, 2023 I've been using the eISY for over a month now. This node server has never worked on eISY. I've tried every version of IoX and PG3x since late Dec. Multiple installs, restarts, etc. All Sonos S2, and a wired connection to the eISY and half of my Sonos devices. Dashboard shows connected with one ST-Sonos controller node. No device nodes. Today, I noticed 1.0.7 of ST-Sonos. Changelog says "update to work with eisy," along with a 50% price cut. Still doesn't work. Same as before, "connected" with one node. I attached my 1.0.7 debug log if anyone wants to take a peek. ST-Sonos_1-31-2023_64452-PM.zip
tazman Posted February 1, 2023 Posted February 1, 2023 2 hours ago, bradshawkyle said: I tried that first and ran into sone strange behavior. I couldn't access via Admin Console, PG3 disconnected, no UD Mobile, BUT I could see and control devices via ISY Portal. I looked around for a post explaining how to configure Ethernet and could only find instructions to "plug it in and wireless is disabled". And ideas how to resolve? If not, I guess I could back-up, factory reset, and configure eISY with Ethernet instead of Wifi. Seems kinda of extreme, though..... That said, I'm willing to go that route if I can get things working properly. If you press the multi function button 4 times that will reset the network configuration on eisy.
bpwwer Posted February 1, 2023 Posted February 1, 2023 @bradshawkylemake sure everything is up-to-date by using the "upgrade packages" button on the configuration tab of the Admin Console. It should switch automatically when you plug in a ethernet cable. However, it will likely get a new IP address from your router so make sure you account for that when trying to access the Admin Console or PG3x. @auger66I just released version 1.0.8, see if that version fixes your issue.
auger66 Posted February 1, 2023 Posted February 1, 2023 (edited) 47 minutes ago, bpwwer said: @auger66I just released version 1.0.8, see if that version fixes your issue. Yes, it did. The dashboard and store are still showing 1.0.7, btw. But it's clearly a new version since it works now. My exit-music-fade-to-off-pause-and-reset-volume program executes so rapidly on eisy compared to the ISY, it's really like hitting the pause button. I'll have to play with it. I've run into other eisy's-too-fast issues after switching over. Some steps in other old ISY programs I had to add repeats to make them more reliable. All Insteon fwiw. Thanks! Edited February 1, 2023 by auger66
Recommended Posts