Techman Posted July 19, 2023 Posted July 19, 2023 7 minutes ago, landolfi said: That was one of the many things I had tried. Did not work for me. I also tried it several times with UD support watching, so they know it did not help my situation. It worked for me, I'm on an Eisy
landolfi Posted July 19, 2023 Posted July 19, 2023 1 minute ago, Techman said: It worked for me, I'm on an Eisy I wish it had worked because one of the times I did it I accidentally on purpose reset to factory settings and had no Zwave backup, so I even when Zwave was working on 5.6.2, I had to start over. Fortunately I only have about 40 Zwave devices and things are better organized this time around.
ShawnW Posted July 19, 2023 Posted July 19, 2023 After 5.6.3 from 5.6.0 my Polisy didn't have any issues with Z-Wave, however it did lock up after the install & reboot (not before the reboot, after). It couldn't be found on Finder and so I finally had to unplug power to get it working again. It beeped a few more times then was fine.
dbwarner5 Posted July 20, 2023 Posted July 20, 2023 @Techman @landolfi Zwave answer can be found here in the wiki. Worked for me, via advice from @Javi https://wiki.universal-devices.com/index.php?title=Eisy:User_Guide#Can't_connect_to_ZMatter_Z-Wave_board_/_dongle 1
landolfi Posted July 20, 2023 Posted July 20, 2023 2 hours ago, dbwarner5 said: @Techman @landolfi Zwave answer can be found here in the wiki. Worked for me, via advice from @Javi https://wiki.universal-devices.com/index.php?title=Eisy:User_Guide#Can't_connect_to_ZMatter_Z-Wave_board_/_dongle Thanks, UD Support tried that with me on 5.6.3 too, and after almost 2 hours we decided to downgrade. 5.6.2 appears fine. My case appears to be an outlier since y'all are finding success with workarounds. I could try 5.6.3 at some point, but more likely I'll wait for 5.6.4 and upgrade during business hours. 1
Michel Kohanim Posted July 21, 2023 Author Posted July 21, 2023 We may have found the root cause and working on a solution. With kind regards, Michel 8
giomania Posted August 6, 2023 Posted August 6, 2023 I also cannot update to 5.6.3, nor PG3x v3.1.36 before that. I have been trying with PG3x v3.1.36 since it was released mid-july. Multiple package installations and reboots. Hopefully this is part of the issue Michel discovered. Mark
TexMike Posted August 6, 2023 Posted August 6, 2023 On 7/21/2023 at 8:15 AM, Michel Kohanim said: We may have found the root cause and working on a solution. With kind regards, Michel Any update? I was ready to migrate from ISY to IOP, but decided to hold off because I'm mostly Z-Wave.
BigMojo Posted August 6, 2023 Posted August 6, 2023 @TexMike, I have the same issue and @Michel Kohanim, @Chris Jahn & the team have been busting butt on this issue. It's my understanding that the fix is in final testing and the solution should be here very soon. 1 1
landolfi Posted August 6, 2023 Posted August 6, 2023 3 hours ago, BigMojo said: @TexMike, I have the same issue and @Michel Kohanim, @Chris Jahn & the team have been busting butt on this issue. It's my understanding that the fix is in final testing and the solution should be here very soon. Any idea what the issue was? Chris Jahn helped me and at one point he said Insteon and Zwave were using the same port. That was when we were still trying to get 5.6.3 working.
BigMojo Posted August 7, 2023 Posted August 7, 2023 @landolfi, I can't speak to the root cause, that's best left to the team. I can say that my issue was communications related evident in a corruption of my zWave device definition file(s). Without putting a timeline on when the new package will be released, I can tell you I'm fully backed up (2x) and ready to go on the upgrade. Read into that what you will 😉
mikeorst Posted August 8, 2023 Posted August 8, 2023 I'm currently on 5.6.0, but when I try to upgrade packages I'm not receiving any updates. Was the release pulled down?
Techman Posted August 8, 2023 Posted August 8, 2023 @mikeorst The 5.6.3 firmware is still viable. Are you on a Polisy or eisy?
mikeorst Posted August 10, 2023 Posted August 10, 2023 (edited) On 8/8/2023 at 2:43 PM, Techman said: @mikeorst The 5.6.3 firmware is still viable. Are you on a Polisy or eisy? I'm on Polisy. I hear a single beep after pressing Upgrade Packages... and then 5 beeps ~ 1 minute later. I'm also on PG3 Version 3.1.20 Edited August 10, 2023 by mikeorst
Techman Posted August 10, 2023 Posted August 10, 2023 (edited) There are some known update bugs. See the July 21st post above. Edited August 10, 2023 by Techman
Recommended Posts