What series board do I have?

[mikek]

Eisy Z-Wave migration instructions (from ISY-994) state "You must be using a 500 Series Board in the ISY-994." How do I determine which board I have? 

Edited 9 hours ago by mikek

[Bumbershoot]

1 hour ago, mikek said:

How do I determine which board I have? 

If memory serves me correctly, the original 300 Series Board had a green LED on the board, which was eliminated on the 500 Series Board.  I believe the LED was visible when the board was installed as well.  Here's a photo of the 500 Series Board.

Edited 7 hours ago by Bumbershoot

[Geddy]

2 hours ago, mikek said:

How do I determine which board I have? 

Check this post: 

(Info in this post might help)

 

How many z-wave devices are you running? Some have found it easier to reset the z-wave devices than try to migrate them if they have only a few. 

TIP: One thing to make sure to do though is make a copy of all your exiting programs in the ISY994 before you migrate. On the root folder in the program tab right click and near the bottom will be a COPY folder to clipboard (something along those lines). Paste that into a text editor (like Notepad on Windows - NOT Word! - you want to keep the raw text as is). Make sure you use the "COPY" folder option and none of the "export" options. This will allow you to review and perhaps fix any programs that do not migrate properly (it's been known to happen and this step will save you house of fixing broken programs).