ThisIsTheWay Posted January 2 Posted January 2 I wanted to add an 8 button keypadlinc button to a scene with an on/off switch. Both are set as controllers in 1 scene. I was hoping that when the on/off switch is turned on/off, that the KPL button would go on/off accordingly. But when i trigger the on/off switch from the console app, the keypadLinc does not go on.off. Quote
Guy Lavoie Posted January 2 Posted January 2 On 1/2/2025 at 9:34 PM, ThisIsTheWay said: I wanted to add an 8 button keypadlinc button to a scene with an on/off switch. Both are set as controllers in 1 scene. I was hoping that when the on/off switch is turned on/off, that the KPL button would go on/off accordingly. But when i trigger the on/off switch from the console app, the keypadLinc does not go on.off. Expand Did you create a second scene with the on/off switch as the controller and the keypadlinc button as a responder? Quote
ThisIsTheWay Posted January 2 Author Posted January 2 On 1/2/2025 at 10:11 PM, Guy Lavoie said: Did you create a second scene with the on/off switch as the controller and the keypadlinc button as a responder? Expand I had not. Now I have. Seems to be the same result. Quote
Techman Posted January 2 Posted January 2 @ThisIsTheWay Right click on the scene, then click on Diagnostics | Scene test Post a copy of the test results Quote
ThisIsTheWay Posted January 3 Author Posted January 3 (edited) On 1/2/2025 at 11:39 PM, Techman said: @ThisIsTheWay Right click on the scene, then click on Diagnostics | Scene test Post a copy of the test results Expand Thu 01/02/2025 06:59:25 PM : [GRP-RX ] 02 61 58 13 00 06 Thu 01/02/2025 06:59:26 PM : [INST-SRX ] 02 50 70.FA.19 46.C2.78 61 13 58 LTOFFRR(58) Thu 01/02/2025 06:59:26 PM : [Std-Cleanup Ack] 70.FA.19-->ISY/PLM Group=0, Max Hops=1, Hops Left=0 Thu 01/02/2025 06:59:26 PM : [CLEAN-UP-RPT] 02 58 06 Thu 01/02/2025 06:59:26 PM : [INST-SRX ] 02 50 71.37.6C 46.C2.78 65 13 58 LTOFFRR(58) Thu 01/02/2025 06:59:26 PM : [Std-Cleanup Ack] 71.37.6C-->ISY/PLM Group=0, Max Hops=1, Hops Left=1 <html><font color="red">----- LL_FrontRight Test Results -----</font></html> <html><font color="red">[Succeeded]</font> LL_FrontRight (70 FA 19 2)</html> <html><font color="red">[Succeeded]</font> Landscape Front Right (71 37 6C 1)</html> <html><font color="red">----- LL_FrontRight Test Results -----</font></html> Thu 01/02/2025 06:59:33 PM : [INST-TX-I1 ] 02 62 00 00 58 CF 13 00 Thu 01/02/2025 06:59:33 PM : [INST-ACK ] 02 62 00.00.58 CF 13 00 06 LTOFFRR(00) Thu 01/02/2025 06:59:47 PM : [ Time] 19:00:00 28(0) Edited January 3 by ThisIsTheWay Quote
Techman Posted January 3 Posted January 3 (edited) Your scene results show that the two devices passed the scene test. When you trigger the scene from the admin console turn on the scene not a device in the scene. If you turn on the light from the switch does the KPL button light? If you press the KPL button does the light turn on? Edited January 3 by Techman Quote
tazman Posted January 3 Posted January 3 You need to select a device in the scene then configure what happens with the other device when it is activated. Quote
GlowingHair Posted January 3 Posted January 3 @ThisIsTheWay Are you switching the device or the scene in the Admin Console? If it's the device, wouldn't just the device respond? If it's the scene, both the keypad button and device should respond - is that the case? 2 1 Quote
ThisIsTheWay Posted January 3 Author Posted January 3 On 1/3/2025 at 10:05 AM, GlowingHair said: @ThisIsTheWay Are you switching the device or the scene in the Admin Console? If it's the device, wouldn't just the device respond? If it's the scene, both the keypad button and device should respond - is that the case? Expand Yes. This was my issue. I was thinking that switching the device in the Admin Console would trigger the scene....but it does not. Physical presses of the devices does in fact work. Quote
lilyoyo1 Posted January 3 Posted January 3 On 1/3/2025 at 12:46 PM, ThisIsTheWay said: Yes. This was my issue. I was thinking that switching the device in the Admin Console would trigger the scene....but it does not. Physical presses of the devices does in fact work. Expand @GlowingHairis correct. You have to control the scene not the device from the console. Quote
Guy Lavoie Posted January 3 Posted January 3 So the second scene did the trick. In my naming convention (to avoid going crazy) I'll usually give the scene a name (eg: "scn kitchen") for the scene where the keypadlinc controls the light, and "scn kitchen rev" for the reverse scene that updates the keypadlinc if the light is operated directly from the switch. Quote
lilyoyo1 Posted January 3 Posted January 3 On 1/3/2025 at 3:12 PM, Guy Lavoie said: So the second scene did the trick. In my naming convention (to avoid going crazy) I'll usually give the scene a name (eg: "scn kitchen") for the scene where the keypadlinc controls the light, and "scn kitchen rev" for the reverse scene that updates the keypadlinc if the light is operated directly from the switch. Expand You didnt need a second scene for that. Quote
ThisIsTheWay Posted January 3 Author Posted January 3 On 1/3/2025 at 4:29 PM, lilyoyo1 said: You didnt need a second scene for that. Expand Correct. I dont need the second scene. My issues with not understanding that scenes do not respond to switching done in the Admin Console like they do to they physical item being switched. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.