Skip to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

emilyanderson

Members
  • Joined

  • Last visited

Everything posted by emilyanderson

  1. Jim's experience with the Kwikset going unresponsive even with repeaters nearby is what worries me about picking a replacement for my own setup. The Weiser note is reassuring since they share the same internals, but I'm unsure whether the 500 vs 700 series chipset matters for mesh reliability in a smaller house. I'm leaning toward a 700 series model but haven't committed, mostly because returns get awkward once a lock is on the door. I came across this Best Smart Locks of 2026 https://pickranked.com/category/smart-locks while comparing options, though I'd still rather hear from people actually running these long term. Has anyone had a 700 series stay stable for over a year?
  2. I run WebControl on an ISY and have been trying to get a simple reminder working for the cordless vacuum I use around the house. The plan was to have WebControl watch a program or state and send me a notification when a run finishes, so the vacuum actually gets put back on the charger instead of sitting dead in the closet. I'm not sure how to approach this cleanly. I don't want the reminder firing every time anything else in the program changes, and I'm worried about creating repeated notifications that I'll end up ignoring. I also haven't figured out whether a single program with a wait is better than a state variable I can reset manually after I plug it in. For anyone running WebControl programs with notifications, how do you keep them from repeating and how do you reset them once the task is done? Is a state variable the usual way, or is there a simpler pattern?
  3. I'm in the middle of expanding my home automation setup and I keep running into a decision I can't settle on my own. I have Universal Devices equipment at home and I want to bring in some YoLink sensors for the garage and basement, mostly for temperature and leak detection. My concern is how well YoLink actually integrates in practice. I've read that it uses its own hub and a different wireless protocol, so I'm unsure whether it works cleanly alongside an ISY or if it needs extra workarounds. I also don't know whether I should pick a hub first or decide on sensors first. I found some third-party comparisons online, but nothing specific to how this plays out in a UD setup. For anyone here already running YoLink: which hub did you start with, and were there surprises getting it to talk to your controller? Any input would help before I buy anything.
  4. I have a WeatherLink setup at home in Des Moines and I'm thinking about adding the Momcozy KleanPal Pro bottle washer to the kitchen. Before I commit, I'm wondering whether the KleanPal Pro's Wi-Fi connection could interfere with the WeatherLink console's network link, since both would sit fairly close together on the same router. My main concern is reliability: I don't want the washer's app connectivity to knock the weather station offline or cause dropouts during the day. I also can't tell from the product info whether the KleanPal Pro needs a dedicated 2.4 GHz band or if it plays nicely with other smart devices. Has anyone here run a bottle washer or similar appliance alongside WeatherLink on one network? I'd appreciate hearing how you set it up and whether you saw any interference. Update after checking around more - Momcozy KleanPal Pro Baby Bottle Washer Review https://ratethepick.com/product/momcozy-kleanpal-pro-baby-bottle-washer-review kept coming up while I was trying to sort out the 2.4 GHz question. It doesn't really settle whether the washer would cause dropouts next to my WeatherLink console, so I'm still hesitant about putting them close together.
  5. The macOS firewall mainly filters incoming connections, so in most setups it won't block IoX/eisy from communicating with your devices on the local network. What tends to cause trouble is when the app isn't allowed to accept incoming traffic. If you notice the UI not responding, check System Settings > Network > Firewall and make sure the relevant process is set to allow incoming connections. Outbound traffic is generally permitted by default, so discovery and local access should still work fine.
  6. ARyder, the earlier point about the app not reaching the eISY seems worth confirming first. Since the Migrate option is about importing from an older controller, it won't help the app locate your new device on its own. I'd check whether the eISY's IP changed after migration, then verify it appears as registered under your account in the UD Portal. If the app still only shows notifications after that, it would help to know whether you're on the same local network when you open it.
  7. The Firefox-only behavior you're describing sounds like a client-side save issue rather than the eisy itself, since Chrome writes the values fine and a reboot didn't change anything. Have you tested a private Firefox window with extensions disabled? Privacy add-ons or strict tracking protection can interfere with how the UI submits and refreshes form data. Also worth clearing the eisy-ui site data/cache in Firefox and trying a hard reload. If a clean profile saves the offsets reliably, you've narrowed it to your Firefox settings rather than the device.
  8. The fix ErikN mentioned was pushed as a separate update rather than a full ISY/eisy firmware release, so it may not show up the way you'd expect. Worth checking the release notes or changelog for the timezone/DST correction and confirming your unit actually pulled it. If Vancouver still reads -8 GMT with DST enabled after that, the update likely didn't apply on your device. I'd verify the version first before assuming something was missed. The fix ErikN mentioned was pushed as a separate update rather than a full ISY/eisy firmware release, so it may not show up the way you'd expect. Worth checking the release notes or changelog for the timezone/DST correction and confirming your unit actually pulled it. If Vancouver still reads -8 GMT with DST enabled after that, the update likely didn't apply on your device. I'd verify the version first before assuming something was missed.
  9. ARyder, if UD Mobile is only showing Notifications and Migrate Existing Installation, it sounds like it hasn't connected to your eISY yet rather than a missing sync button. The Migrate option is for pulling settings from an older controller, not for syncing the app itself. Make sure the app is pointed at the eISY's current IP address on your local network, and confirm the eISY shows as registered in the UD Portal under your account. Once the app actually connects to the controller, the full device view and sync options should populate. Worth double-checking the IP hasn't changed after the migration.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.