Michel Kohanim

Precisely what is software correctable and how can you be so sure? The link between the doorlock and morninglinc is NOT accessible to ISY or any other programming interface. This is the only security feature for morninglinc. With kind regards, Michel

Hi Bob, This is so very odd and I think you may be developing a file system issue. Yes, you can use a program with one Action: Irrigation - Reset Variables This should reset the values in the file. If this does not work, please do let me know and we'll take even more drastic measures. With kind regards, Michel

Hello paauto, Yes, you do. It's really not that difficult ... all you need is the MAC address of your computer and the subnet. ISY calculates the rest. And please note that we have a 30 day, no questions asked, money back guarantee. In case the module does not meet your requirements, we'll fully refund your purchase. With kind regards, Michel

Hello dougos2, Thanks so very much for the explanations. I am a little confused since with 3.2.1, you can do what you are suggesting (with notifications) ... i.e. when the 3:00 AM query runs, if you have a program where all your devices are ORed (not responding) and the action is custom notification. Although a little ugly, but it does precisely (I think) what you are seeking till we implement an "any" condition. If this is not what you are looking for, can you please elaborate a little bit more as to what you need? With kind regards, Michel

Hello dougos2, We will surely take your input into consideration. To recap, you basically want a condition to test for "any" devices not responding, correct? aLf, query does indeed have a negative impact. For devices that ISY is not in charge of controlling while you are out, I would just add a program condition of not responding. For others, I do not think you would want to keep querying them. The 3:00 AM query should be fine. With kind regards, Michel

Hello mumpers, Can't reproduce here ... would it be possible for you to send a screenshot of your scene containing the templinc to support@Universal-devices.com? Thanks and with kind regards, Michel

Hello bryanlut, Sincere apologies for tardy reply. You can certainly downgrade the firmware but I seriously doubt it will solve the problem. RF communications go through the PLM only and ISY is not in the middle. If you are still having problems please do not hesitate to contact our tech support team (Submit a ticket link below) and we'll be delighted to login to you system and see what's causing all the trouble. With kind regards, Michel

Hello bpwwer, Is there any pattern (i.e. does it happen all the time for all your customers)? I just cannot reproduce it here but we have to get it fixed in case there's a bug. Would it be possible to change your station to see if you still get the invalid characters? RLIKWARTZ, thanks so very much for the update. There has been one report of system hang for which we have already implemented a fix. The issue was in the file system and I am thinking that perhaps the two issues are related (hopefully). LeeG, thanks as always for your detailed analysis and explanations which are 100% accurate. With kind regards, Michel

Hello bpwwer, This is quite strange. Does it revert to a good number after cycle complete? Does it ever correct itself? Is this an event or when you go to http://isy/rest/climate? Is this the same that you see in the Admin Console? I am not sure where those -- are coming from. We shall take a closer look. RLIKWARTZ, We have not tested restoring a 3.2.1 backup on 3.1.17 (we normally do not recommend this as it's very difficult to support forward compatibility). This said, I suspect it would not work since we had to modify the nodes to add information about I2CS characteristics. With kind regards, Michel

Hello Hermann, Unfortunately not and we do not have any plans mostly because with the installation of Smart Meters, it's very difficult to justify time/resources to implement integration with this device. With kind regards, Michel

Hello Dwight, Quite odd and very unlikely (or, let's say impossible) for ISY to do things on its own. Would you be kind enough to forward the email notification you got to support@universal-devices.com? With kind regards, Michel

Hello loganjw, MAC has a [dictatorial] tendency of unzipping files automatically after download. ISY needs the file in tact and thus you have to tell MAC not to unzip. You can try: Unchecking 'open safe files' in the General tab of Safari's preferences. With kind regards, Michel

Hello dennisric, Thanks so very much ... At this point, I think it would be best to contact our support team so that we can log in to your computer and see what's going on. I do apologize for the inconvenience. With kind regards, Michel

Hello apostolakisl, Would you please send your logs to support@universal-devices.com? With kind regards, Michel

Hello dennisric, By ELK Console do you mean the Java applet or do you mean ELK RP? Can you connect to your ELK from ELK RP using network, the IP address that you have in ISY and port 2101? With kind regards, Michel

Hi Tim, Those errors are file system errors. We are trying to figure out why some of the nodes were not migrated properly. There are two cases: 1. File access (which is not the case in your situation) 2. The had wrong values to start with With kind regards, Michel

Hello Teken, I am so very sorry to hear about all the problems you had. Can you please: 1. Change your userid/password to admin/admin 2. Take a backup 3. Send your backup along with the Error Log to support@universal-devices.com With kind regards, Michel

Hello LeeG, Thanks so very much. Hi Tim, do you have any -1100xx errors in your Error Log? If you do, can you please send me your error log? With kind regards, Michel

Hello dennisric, Please include any 4 or 6 digit number in the Access Code field and retry. With kind regards, Michel

Hello Andy, You should be able to ... 1. The first thing I check is to make sure the on level for ApplianceLinc is not set to zero in the scene for the KPL button 2. Do a link compare between ISY and the Device (Diagnostics | Show Device Link Table and Diagnostics | Show ISY Link Table) ... are they in synch? 3. And lastly, I would remove the KPL button from the scene and add it back to the scene With kind regards, Michel

Hello all, In 3.2.x, ISY has to migrate specific information about devices so that we properly apply different communication modes based on different devices. There seems to be some corner cases where the migration might not succeed: 1. The information ISY already had was out of synch 2. ISY could not read the configuration Do any of you see -1100x (.REC) errors in your Error Log starting from after the upgrade to 3.2.0? With kind regards, Michel

Thanks LeeG. We are looking into it. With kind regards, Michel

Hello all, I am happy to announce the availability of our 3.2.1 release! For a list of changes, please take a look at this post. This is a minor release to fixed the bugs introduced in 3.2.0 when we introduced support for I2CS devices (including FanLinc). In addition, we added support for a couple of new INSTEON devices. Know Issues None Things to test: - Make sure the programs can be loaded - Random variables - Register and manage I2CS devices, FanLinc, and TempLinc - Make notifications are working again using friendly names (i.e. fname lname:account) Important Information 1. Important If you have already installed a self signed certificate and your current firmware is 2.7.10 and below, you must reinstall a new one before the upgrade. 2. Please note that Safari does not support SSL session reuse and thus might take an exorbitant amount of time to communicate with ISY. As such, when using 2048 bit SSL, it's best not to use Safari. 3. If you are using the Irrigation Module and are upgrading from releases prior to 3.1.5, you must edit the programs using Irrigation variables and save the programs again. Irrigation module is no longer on promotion 4. Upgrading from 3.1.3 and below: If you are using WeatherBug Module's Rain Today in your programs, please note that the precision has changed from 1/10 to 1/100 and thus your programs might not run properly 5. For a discussion of variables, please look at our Program Variables forum. Instructions: 1. Please backup your ISY (File | Backup ISY). If you are backing up a 3.1.6 system, please note that the backups are corrupted. If you have a backup from prior releases, you should be OK 2. Please download the firmware for your platform - please do not unzip ISY 99i Series ISY 994i Series 3. Login to the Admin Console and choose Help | Manually Upgrade [the name of your system] 4. Choose the file saved in step 2 5. After the upgrade, ISY reboots. Please do ensure to clear your Java Cache 6. IMPORTANT Once upgrade is completed and ISY reboots, use any of the following methods to access your ISY's Admin Console: a. 99/994i - http://isy/admin - applet (Windows only) b. 99/994i - http://isy/admin.jnlp - Java application (Windows only) c. http://your.isy.ip.address/admin - applet d. http://your.isy.ip.address/admin.jnlp - Java application e. http://www.universal-devices.com/99i/3.2.1 - applet f. http://www.universal-devices.com/99i/3.2.1/admin.jnlp - Java application Dashboard - not fully supported - http://www.universal-devices.com/99i/3. ... board.jnlp 8. Please backup your system again Thanks and with kind regards, Michel

Hello all, We have not done anything for LED brightness in 3.2.x ... the only changes where I2CS related so they might have had a negative impact. We shall take a closer look. With kind regards, Michel

Hi, Just a caveat, if you have thermostats, sending All On/All Off will cause the thermostat to go to an undefined state. I strongly advise against using it. With kind regards, Michel