Michel Kohanim

Hello Teken, I think we may have finally found the problem. We should have another code drop tomorrow. If you wish to test before then, please send an email to support@Universal-devices.com. With kind regards, Michel

Hello Teken, Please do be kind enough to submit a ticket (link below). At this point, the best thing to do would be to log in to your system and see what's going on. From the event viewer entries, everything seems to be OK and it should work. CMartin, what was the first error? You might want to try https://your.isy.ip.address ... I suspect your firewall is blocking the Admin Console from communicating with your ISY. With kind regards, Michel

Hi sanders2222, My pleasure and I did get your email and responded. With kind regards, Michel

Hello ssingh1234, I think it would be best to contact MobiLinc directly. As far as I know, you can indeed activate variables through MobiLinc. With kind regards, Michel

flemingmike, please try this URL: http://www.foscam.es/descarga/ipcam_cgi_sdk.pdf With kind regards, Michel

Hello jamesddelaney, I am so very sorry to hear this. I have a SynchroLinc v.82 right in front of me and I have tried every possible permutation to make it fail with no success. The only thing we can do at this point is request SmartHome to send us their latest firmware (0E) and see if we can figure out the root cause. Again, sincere apologies. With kind regards, Michel

Hello sanders2222, Thanks so very much for the update. I would very much appreciate it if you could send me your Error Log when you get the unit back up and running. With kind regards, Michel

Hello all, I am happy to announce the availability of Release 3.2.3 (Beta). With kind regards, Michel

Hello all, I am happy to announce the availability of Release 3.2.3 (Beta). With kind regards, Michel

Hello all, I am happy to announce the availability of our 3.2.3 release! For a list of changes, please take a look at this post. This is a minor release which fixes outstanding bugs and device compatibility issues Know Issues None Things to test: - MorningLinc - SynchorLinc - EZxx - SwitchLinc Timer -- You might have to remove devices and then add them back to ISY Important Information 1. Important If you have already installed a self signed certificate and your current firmware is 2.7.10 and below, you must reinstall a new one before the upgrade. 2. Please note that Safari does not support SSL session reuse and thus might take an exorbitant amount of time to communicate with ISY. As such, when using 2048 bit SSL, it's best not to use Safari. 3. If you are using the Irrigation Module and are upgrading from releases prior to 3.1.5, you must edit the programs using Irrigation variables and save the programs again. Irrigation module is no longer on promotion 4. Upgrading from 3.1.3 and below: If you are using WeatherBug Module's Rain Today in your programs, please note that the precision has changed from 1/10 to 1/100 and thus your programs might not run properly 5. For a discussion of variables, please look at our Program Variables forum. Instructions: 1. Please backup your ISY (File | Backup ISY). If you are backing up a 3.1.6 system, please note that the backups are corrupted. If you have a backup from prior releases, you should be OK 2. Please download the firmware for your platform - please do not unzip ISY 99i Series ISY 994i Series 3. Login to the Admin Console and choose Help | Manually Upgrade [the name of your system] 4. Choose the file saved in step 2 5. After the upgrade, ISY reboots. Please do ensure to clear your Java Cache 6. IMPORTANT Once upgrade is completed and ISY reboots, use any of the following methods to access your ISY's Admin Console: a. 99/994i - http://isy/admin - applet (Windows only) b. 99/994i - http://isy/admin.jnlp - Java application (Windows only) c. http://your.isy.ip.address/admin - applet d. http://your.isy.ip.address/admin.jnlp - Java application e. http://www.universal-devices.com/99i/3.2.3 - applet f. http://www.universal-devices.com/99i/3.2.3/admin.jnlp - Java application Dashboard - not fully supported - http://www.universal-devices.com/99i/3. ... board.jnlp 8. Please backup your system again Thanks and with kind regards, Michel

Hello GMD99, Do you have any firewall software on your computer. Some firewall software prevent your computer to communicate with devices that are not in their trusted zone. You might want to try https://your.isy.ip address instead. Some firewall software are more lenient on HTTPS communications. With kind regards, Michel

Hello flemingmike, Unfortunately not fully integrated. This said, you can use Network Resources to send commands to pretty much any camera. With kind regards, Michel

Hello sanders2222, I am so very sorry to hear. Do you remember what's your ISY's firmware version? Also, do you have access to your router? If so, can you ping ISY? With kind regards, Michel

Hello ScottAvery, Thanks so very much for your feedback and, as I mentioned in my reply back to you, you are 100% correct. With kind regards, Michel

Hi morgan4x4, Try DIM and BRT commands. With kind regards, Michel

MikeBro, I do hope that you are aware of the fact that we do have a dedicated tech support team ready to help you. Please either call us or Submit a ticket (link below) and we'll be delighted to schedule a time most convenient for you to walk through your setup and figure out what's going on. With kind regards, Michel

Hi LeeG and gviliunas, I think we have found the bug with IOLinc ... as we had expected, supporting i2cs in combination with i1 and i2 is basically a nightmare. We should have a build hopefully by Friday. Hi molney, if you have PLM version 98, that's the root cause. If not, would you please use Event Viewer on the last level (Device Communications), retry and paste the contents on a reply. With kind regards, Michel

Hello jamesddelaney, If you do not mind an alpha, please send an email to support@universal-devices.com ... I think we may have found some of the issues with random i1, i2, i2cs communications. With kind regards, Michel

Hello strahan001, Actually, your question made me think so, now, every time cycle complete is called, we send an update to the UI + have programs re-evaluate. Forecast is indeed on our list but we have not had good and reliable information from WB. With kind regards, Michel

Hello strahan001, Currently there's no easy way of doing this since things are happening based on the polling cycles. With kind regards, Michel

At least they did get an answer. We never got one! With kind regards, Michel

Hello ekuzmack, The main problem with using network resources is that it's a one way street: it can send commands but it cannot receive commands. Furthermore, as far as I know, Vera does not have an HTTPS server so the commands you send to it from ISY would not be encrypted. This is a little scary for me especially since we are talking about door locks. But, I must confess that I do not know much about Vera except bits and pieces of information I receive from customers such as yourself. To report door lock status to ISY, you can use one State Variable and then - and if possible - call ISY's REST interface from Vera. This said, I strongly suggest using HTTPS (not HTTP) as all your credentials and door status are going to be transmitted in the clear otherwise. With kind regards, Michel

Hi Tim, precisely but with one note: the actual change takes place immediately. The event generated to be sent to the Admin Console takes place at each poll (to reduce network traffic). With kind regards, Michel

Unfortunately not. We did send them a request for APIs but never heard back. With kind regards, Michel

Hello dennisric, It would really be best to contact our support so that we can figure out what's going on. Please note that in recent editions, you DO NEED to have an Access Code (any 4 or 6 digit number) filled out otherwise ISY cannot communicate with ELK. With kind regards, Michel