Michel Kohanim

Hello ergodic, I am so very sorry for the inconvenience. -14 means that Auth Login was not successful (for a list of errors, please take a look at http://www.universal-devices.com/mwiki/ ... MTP_Errors ). And you have the same issue with our test gmail account? What firmware version of ISY do you have? With kind regards, Michel

Hi Devon, That's actually not a bad idea. It will surely save a lot of development effort trying to "imply" the state of other buttons. I will add this as a product request (priority low). Thanks so very much! With kind regards, Michel

Hi Gary, So, which weather station should we support? It seems Davis is the right one, yes? Do they have Ethernet access/APIs? With kind regards, Michel

Hi Gary, Unfortunately, we do not even have direct support for a weather station in our requirements at all. And, you are the only one with this request. Do you think this feature will be required by a lot of folks? With kind regards, Michel

Hello Illusion, Thanks so very much for the update (which I was very much looking forward to) and considering this fixed even if temporarily. Please do keep a close eye on the situation and notify us in case you find more anomalies. Thanks again and with kind regards, Michel

Hello DevonSprings, I do hope that I got your scenario correctly. Unfortunately Mutex buttons only work in the local switch and not on any other linked devices thereto. So, I think the best way would be to put all the buttons that you want turned of in a scene as responders (say, dining status scene) and then use a program to turn off this scene when you turn on your dining scene. With kind regards, Michel

Hello petesc2, Before we delve deeper, what version of ISY firmware are you on? Querying the status of the sensor should be OK as long as you have not turned on/off the relay. That's where all the issues come from. So, for best performance, you might need two IOLincs: use one as a sensor and the other as a relay (or, we'll have to wait for a fix from SH). With kind regards, Michel

Hello Dave, Apologies for the inconvenience. Please do NOT factory reset your ISY. What you want to do is: 1. Clear your Java Cache 2. Make sure your firewall software is off 3. Go to http://www.universal-devices.com/99i and try the upgrade again If this fails - and if you have a remote URL which allows us to login to your ISY - please provide it to support@universal-devices.com along with your credentials (reset to admin/admin please) and we'll try to upgrade it remotely. With kind regards, Michel

Hello Gary, As far as I can remember (from my conversations with WB), you will have to become part of their network; i.e your station should send information to their servers so that they can aggregate the data. With kind regards, Michel

Hello CJVann, I have had very intermittent behavior with respect to motion sensor low battery events. Do you have the beta motion sensor or is it production? With kind regards, Michel

Hello ergodic, -11 means that ISY timed out while the SMTP server was validating the TO. Are you sure the email address to which the notifications are sent is a valid address? With kind regards, Michel

Hello Joe, Currently, the protocol provides zone number (1-4) for other sensors but, to be honest, we have never tested it. So, I cannot be sure if it works and how accurate it would be. With kind regards, Michel

Hello ergodic, I do apologize for the inconvenience. Please do be kind enough to check your log (Tools | Log) and copy/paste all errors starting with -5000x . If you haven't yet, please try upgrading to 2.7.2. With kind regards, Michel

Hello wacvmd, Yes, indeed there is: Network magic - for some reason - keeps trying to sign on to ISY but, since it doesn't have the credentials, it fails. In the process, ISY thinks there's an attack (correctly so) and thus exponentially add to the amount of time it takes before you can long on again. This may give you the feeling that ISY is unresponsive. With kind regards, Michel

Hi Joe, The motion sensor sends an On if and only if: 1. Motion has been sensed 2. The current state is off So, if you have a timeout of 10 seconds, and if motions is sensed within those 10 seconds, then motion sensor will never send off till no motion is sensed within 10 seconds after the last motion. With kind regards, Michel

Hello Joe, Yes, the unlinking will continue and all the RL links are removed from all other devices (that the RL was linked to) + the PLM. With kind regards, Michel

oberkc, I sure will. Thanks so very much for the offer. With kind regards, Michel

Hi aLf, The algorithm is from NOAA. With kind regards, Michel

Hello drw and oberkc, Thanks so very much for the detailed responses. I am really at a loss as to what could have caused these problems mostly because I have not been able to reproduce it with/without NTP connection and even with a failing NTP server. And, it seems that drw's sunset programs ran at the correct times but oberkc's didn't. It's quite baffling and I do take this issue very seriously (we cannot expect anyone to reboot just to get the correct time). As such, I am going to add this to our list of bugs and have it tested more thoroughly. Thanks again and with kind regards, Michel

Hi LG, Perhaps your port forwarding rules are no longer in effect? With kind regards, Michel

Hello slpelts, Try this: If From Sunset To Sunrise (next day) Then ... Else ... With kind regards, Michel

Hi Joe, I am sorry ... I think I didn't get your question correctly. You are right: all on/off is only for those that are linked to the RL. So, if the RL All on/All off cause unrelated devices to turn on/off, then I suspect you have slave links in the other devices. Can you verify that this is indeed the case? With kind regards, Michel

Hello Joe, The All On/All Off buttons on RL turn all devices that have ever been linked to any of the RL buttons. That is, regardless of which buttons were programmed, any device linked to RL will turn on/off. With kind regards, Michel

Hi again, thanks so very much. I will check into this more closely ... the main issue is that I cannot reproduce this issue no matter what I do. With kind regards, Michel

Hello all, Would you be kind enough to tell me which firmware version of ISY do you have? With kind regards, Michel