Michel Kohanim

Hi again, This is quite interesting indeed and very much useful. I can tell you that I have not heard of any imminent changes to the thermostats API which would support what you are looking for. This said, however, I think you can do most of what you wish within ISY. Yes, it's quite a roundabout way of doing things but, tactically, that's the only option. With kind regards, Michel

Hi rchorowitz, In the ELK configuration section, do you the correct IP address and port for your ELK? If you can get to your ELK Java Console, and if ELK RP is not connected, then it could only be the case that ISY cannot communicate with your M1XEP. Are they on the same network? With kind regards, Michel

Hello soft00, Apologies for a tardy reply. It seems that your problem has been solved in the other thread. If not, please do let me know. With kind regards, Michel

Hi Eric, LOL ... to be honest, this is one of those things that has been bothering me for a while and it's bound to get fixed. The way it is now is not good. With kind regards, Michel

Hello Geoff, I am not sure what you are alluding to since - to my knowledge - humidity is a read only value. And, I have not seen anywhere in the INSTEON documentation that there's an option of setting humidity settings. Currently, you CAN write programs that do different things based on the humidity reading. With kind regards, Michel

Hello CompKing, This has been fixed in 2.6.14 ... just for reassurance, this is a LOG bug where instead of saying Query, the log is just showing 0. In short, those entries are the query REQUEST and not the response. With kind regards, Michel

Hello Candide, Is it possible that ISY got a new IP address after the upgrade? If so, you have to change the IP address in your settings corresponding to your ISY's IP address: http://forum.universal-devices.com/viewtopic.php?t=784 rchorowitz, Do you know the IP address for your ELK M1XEP? If so, what happens if you go to http://your.m1xep.ip.address? Do you get the Java Console? Also, are your sure your ELK RP is not connected? When RP is connected, no other client can connect to M1. With kind regards, Michel

Hello CompKing, Unfortunately, the limitations of their desktop application also applies to their API which we use. With kind regards, Michel

Hello Charlie, Would you be kind enough to make sure you have the correct year? I just checked LA, and ISY shows the correct time (within 50 seconds) of the times reported by NOAA: http://www.srrb.noaa.gov/highlights/sun ... nrise.html Furthermore, it seems that: 33 3m 36s 117 1m 12s are close enough so that even NOAA shows the time for LA instead. Please do let me know. With kind regards Michel

Hello Eric, Unfortunately not at the moment. Currently, it's an all or nothing deal. With kind regards, Michel

Hi Stowaway, Thanks for the update. My personal feeling is that you are going to have the same problem again especially if you try to program this appliancelinc to anything else. Please do keep us posted. With kind regards, Michel

Hi someguy, Unfortunately you cannot do that now but this is a much requested feature (disable) which we shall include in one of our future releases. With kind regards, Michel

Hello Charlie, This sounds very much like a bug. Would you be kind enough to send me your coordinates (including timezone, latitude, longitude)? Thanks and with kind regards, Michel

Hi aLf, First of all, it would be quite interesting if a device would - by itself - develop links to other devices. But, I've seen worse! Ok, factory reset: 1. Take the set button out and leave out for 10 seconds 2. Push and hold it in for 10 seconds Yes, please do restore with ISY and keep us posted. With kind regards, Michel

Hi aLf, Wow, a strange one. You mentioned that you looked at the event viewer and you could not see traffic for SW2. Did you notice any X10 messages? At the moment, I must agree with Mike: Factory reset and then restore just SW2 (the one that turns on randomly). With kind regards, Michel

Hi Rod, Please do help me understand: if ISY puts everything in a backup file, in a zip format, what difference does it make if you could edit the programs? Furthermore, if ISY is non-functioning, what value does this bring? With kind regards, Michel

Hello Rod, I have already responded to your email. Please do keep me posted. With kind regards, Michel

Hello Stowaway, Please try restoring the LampLinc. If this works, then the problem is a bug in LL where duplicate links are created. With kind regards, Michel

Hello Jim, Yes, it's quite possible especially on LLs, SWLs, and KPLs (the newer ones). Hi Erirc, the best place would be http://code.insteon.net but I think you can do a lot more valuable things with your time! With kind regards, Michel

Hello all, The bug is GUI related and has no impact on the correct functioning of your programs. With kind regards, Michel Jim, actually the day of the week is also incorrect today--it says Monday instead of Wednesday.

Hello Eric, We have to support i2 since new devices (such as Motion Sensors, Thermostats, new SWLs and KPLs) do not respond to PEEK/POKE and thus we can never write slave links in them. Therefore, ISY would not be able to program your scenes when you have a mixture of i1 and i2. The manual linking process between i1/i2 devices should continue to work since the writing of the db entries is done internally to each device and does not depend on the protocol. I am sure we'll eventually find all the issues and fix them especially now that SH is interested in the bugs we are seeing. Thanks so very much, With kind regards, Michel

Hi Michael, This has also been reported by others. If you don't mind, please do be kind enough to post your findings to: http://forum.universal-devices.com/view ... 5364#15364 With kind regards, Michel

Hello all, I am very pleased to let you know that SH is very interested in knowing about all the problems you may have with your devices. This topic is going to serve as the one place where SH can read/review problematic issues. To make this process effective, please follow these guidelines: 1. Please make sure that you do NOT post to this topic unless we are sure this is indeed an INSTEON issue 2. Please do NOT use this topic for interactions 3. Please be concise and provide the following information: --a. Description of the problem and the product type --b. Revision, Date Code, and Lot Numbers There should be 2 labels on the units that contain this information. One will have the product model number and date code, the other will have the revision and lot number. Thanks so very much, With kind regards, Michel

CJVann, If you are still having problems with creating scenes, perhaps it would be best to call our tech support and let us walk through it to pinpoint the problems. With kind regards, Michel

Hello Eric, Good question! 1. Close all your browser windows 2. Control Panel -> Java (on MAC, you might have to reboot your computer) 3. Settings->Delete Files (select all) With kind regards, Michel