Michel Kohanim

upstatemike, There might also be a program in ISY which is doing something based on the SG's motion sensor. So, again, having ISY off for a 24 hour period is the best option at this point. With kind regards, Michel

Hello Richard, in the next drop, there will be a workaround for non-toggle mode for versions 1.6 and above with the following caveat: Not all KPLs versions 1.6 and above behave the same! With kind regards, Michel

Hello Richard, Thank you for finding this. We just verified that with 1.6 and above this function makes all buttons non-toggle off. The next step is to see if this is KPL related or ISY related. I shall keep you posted with the outcome. With kind regards, Michel

upstatemike, At this point I think shutting off ISY for 24 hours is the best idea. Questions: Can Stargate control these devices? Do you have any other controller? With kind regards, Michel

accessha, You are 100% correct ... unfortunately - due to short release schedules and since we wanted to be completely functional in all levels - we put all the help/documentation/wizards for last. Hopefully, we'll get to it after our 2.7 release. With kind regards, Michel

Richard, In addition to what Rand suggested (thanks Rand!), you may want to try our 2.6.1 Beta release which has more support for KPL 1.5/6. My other question is: do you have the same issue with other KPLs (say, 1.4 or 1.65)? With kind regards, Michel

Hello upstatemike, Are any of the following devices KPL 1.5 or 1.6: Laundry Keypad Button C Outside Driveway Display Outside Mailbox Light With kind regards, Michel

Hello ResIpsa, If you've setup your remote access using ISY, then the combination of not being able to access it from My Lighting icon and remotely makes me suspect a firewall software on your system. If you wish, you can send me your URL (support@universal-devices.com) and I can check it out for you. With kind regards, Michel

upstatemike, Thanks. I don't think the problem is any of your switches ... I am almost certain that you either ISY on its own (bug) or a program within ISY is the culprit. We just have to figure out which! With kind regards, Michel

Hello upstatemike, Thanks so very much for the detailed response. Please see my comments below. With kind regards, Michel Same button on both keypads should not be the problem. I agree with you! May I humbly suggest a printout of your topology? At the minimum, this will ease the process of finding the link between these devices/scenes. It is possible but I wouldn't delete those scenes till we figure out the relationship between the two scenes (common devices/programs). With kind regards, Michel

Hi Falco, Except for Saturdays, you should normally expect a reply within a couple of hours. If you still haven't received the link to Beta download, please do follow up with another email to support@universal-devices.com Thanks and with kind regards, Michel

upstatemike, I am so very sorry for the inconvenience. This is indeed quite odd: If ISY knows about the status of all the devices in the scene - when they are auto activated - then the problem is only one of the following: 1. Please go to Configuration->ELK ... please make sure both of your ELK IP address/Port are BLANK 2. There's either a program (or a bug) which causes ISY to send that group command. Please do be kind enough to check the log to see who/what issued the command. 3. KPL 1.5/1.6 but that has already been ruled out With kind regards, Michel

Hello accessha, Please see my comments below. With kind regards, Michel You are correct! Correct Correct to some extent: you are modifying the on-levels/ramp-rates of all devices in that scene CONTROLLED by that CONTROLLER only. So, if you have two controllers in the same scene, then each controller has its own ol/rr s for each and everyone of the other members of the scene Correct Option 2 is activated when you physically click on a controller (say a KPL). Option 3 is when the scene is activated by ISY, say your Sunset scene. Yes, you choose option 2: in the scene, click on your RemoteLinc button 1 and then change the ol and rr of your LL as you desire They won't be changed unless you change them explicitly (wherever you see [Applied Locally])

edfinely, Working on both and should be there by the official release. With kind regards, Michel

Hi jonjonbear, Apologies for the misunderstanding. ISY has a configurable "repeat" times; you can also add Wait and Repeat in your programs to repeat certain messages. I really cannot talk about how HomeSeer works, but INSTEON protocol itself only has a HOP COUNT which basically means that each packet "may" be repeated HOP COUNT times on the network till it reaches its destination. Beyond that, PLMs and other devices do not repeat commands unless instructed to. So, I would assume that the repeat issue is either coming from HomeSeer or possibly some noise on the line. With kind regards, Michel

jonjonbear, As far as I know, HomeSeer does not send INSTEON group commands and thus if you turn on/off a group, it will send a sequence of on/off/actions to each device in the scene individually. In order to answer your question, please let me know if you have the same issue with two (or more) switches controlling other INSTEON devices. If so, then ISY will exhibit the same problem and so do any other INSTEON related solutions. As far as X10, nothing is repeated since (in most cases) there are no acknowledgments from the devices. With kind regards, Michel

MikeB, There's a 30 second timeout: you have to be doing something within every 30 seconds (from the previous action) otherwise you'll be logged out. With kind regards, Michel

kcshipley, We'll check into it ... thanks for reporting it. With kind regards, Michel

Ed, Apologies for the confusion. We are working on adding more features to the simple HTML interface and I have added your requirement in our list. With kind regards, Michel

Yes, In the program summary, click on the desired program and from the drop down list choose Run. With kind regards, Michel

edfinely, That's part of our Triggers 2.0 plan ... With kind regards, Michel

Hello edfinley, Unfortunately not at the moment since we do not maintain the states of scenes . There's a requirement to do so and we are investigating it. With kind regards, Michel

Hello kcshipley, So, it works with non-X10 scenarios? Thanks and with kind regards,

Hello All, 2.7 Beta release is now available. If interested, please send an email to support@universal-devices.com With kind regards, Michel

Hello again! Would you be kind enough to test your notifications with an INSTEON condition and let me know if it works? Thanks and with kind regards, Michel