andrew77

Everything seems to be running (haven't checked timers etc yet) except for a few devices. I've tried right click "Restore Device" but that doesn't seem to work. Should I remove them and re add them to the ISY?

@Geddy Thank you for that piece of advice. I hardwired the computer to the switch the ISY is plugged into. It seems my ISY is up and running again. I'm cautious so I'll hold back any celebrations until the system has been up and running for a while. I'm also taking this 'warning' and looking at upgrades. Since I cant get Insteon stuff and 700 series Z wave seems like the best bet I'll keep on the UD site for when there is stock for the polisy models. Thank you everyone that chimed in to help this perpetual noobie with his ISY. Drew

Hi Michel, I did get your email and tried to order one off your site but it wouldn't take my shipping address. Luckily, I found one in a drawer that fit the specs. When I plug it in the TX and RX and Memory flicker slightly but then its just the power LED that stay lit. Not being able to Telnet to it makes this difficult. Anything else I can try?

Just tried to restore ISY and got this error code I know the zip file isnt empty

I found an old power supply that seems to work. I still cant telnet into anything to format the card. I've tried IP address and /desc and just the IP address I get -bash: telnet: command not found

I didn’t realize they sold replacement power supplies. Problem solved.

I’m finding 2.1 barrels but no 2mm barrel. Is the tolerance exact or would 2.1 suffice? this seems to be centre positive and 2.1 mm.

Thank you for helping. Working on the situation is always better than sitting around with no direction. I’m sure this is workable

I've just tried unplugging it and plugging it back in a few times and the ISY isnt coming online as far as an IP address goes.

I cant seem to always see the IP of the ISY Right now the Launcher cant see any ISY and the Orbi doesn't list it. If I unplug and plug it back in it sometimes appears.

I apologize for the radio silence. We had a fast storm rip through our area and lost power for 8 hours. my issue seems to be that I can’t format the card. I’ll try again tomorrow and see. Is the only way to format it by telnet? if there’s another better way I’m open to that. drew

I wasn't able to format it as I cant log in to the ISY to format. I believe its a Sandisk and I'm not sure what rating it is sorry. I cant see the ISY again. I'll have to unplug and plug it back in

Good to know

Yes. The ZIP File is called insteon_4.9.0.zip I had to download it from the Forum

It starts then I get this

Plugged it back in and now I have this. Encouraging at least. Should I restore ISY from a backup (one that was made before all this goings on)

I've just checked the Orbi now and the ISY has disappeared again. Last time this happened I unplugged the ISY and plugged it back in. IT then popped up but it seems to not want to stay

Sorry. You asked if I was using the ISY Launcher or the admin.jnlp I've clicked on both to get to the Console and I get the same result. Although my .jnlp is named icy.jnlp

That is on my list for this summer as well. But the website says all sold out. And if its not the ISY but the PLM I'm screwed either way.

I've tried clicking on both to get it running. Neither let me get to the SAVE part. When I hit ENTER it waits a few seconds and then says NOT FOUND.

I figured as much. I’ve never known a better service experience than this forum and Michel.

I logged into the Orbi with safari and found the IP. When I type it in (sometimes I leave out /desc and other times I keep it in at the end) It says Not Found I have a Mac. I can’t get anything running to do a reformat or anything you are correct

Responses have been spotty. I think they are probably piled on with work. Usually they are on it fast. And its a holiday weekend (here at least) As it stands now I have no functionality with the ISY. No programs or timers work. Voice commands through Alexa don't work. I can shut off lights with the device itself. I cant find the ISY in the Launcher so I cant reformat an SD card. I don't know if its the SD card or maybe the PLM. If its the PLM I'm stuck as Insteon is no longer. I know I was told to wait for Michel to get back to me and if thats the answer I get here that's fine. I'm just hoping to get something back online. Drew

I have the ticket open with Michel. We were going back and forth but we’ve stalled. Not a jab at all. I know he’s busy. I have no control over timers or anything or voice control. Hahaha how helpless I’ve become in my own home. Thank you for the help

When i put in the new SD I try to Telnet and I get this -bash: telnet: command not found and the Launcher doesn't see any ISY. (regardless if I Add its IP) When I put in the old SD the Launcher finds the ISY but then crashes so I seem to be stuck between a rock and a hard place... Drew If its my PLM am I screwed because Insteon is kaput? (not sure how to check if its my PLM)