Techman

What version of the ISY firmware and UI are you using? What version of Java are you using? What message do you get? I'm also running Windows 10 and have no issues accessing the Admin Console using the Java app.

also try doing a diagnostic | compare on the KPL to see if you have any links that are mismatched. are you running the 994 pro? what version of the ISY firmware and UI are you running?

are you including the bathroom?

How about this setup on your night stand http://www.smarthome.com/insteon-2335-222-6-button-scene-control-keypad-with-tabletop-enclosure-white.html You could use the dimmer to control the lights and the other buttons to turn on your scenes

Stu is correct, it was on Amazon. The good news is it's still there waiting for you!!

I just noticed that Smarthome has dropped the price on the 2413S to $53.65. I wonder if they're clearing them out for the new model?

The 2413S PLM is dual band, both RF and powerline. If your system appears to be more dependent on RF then the powerline you may have either interference on the powerline or the two legs of your powerliine may not be properly coupled

Is the green light on the PLM lit? If not then either the PLM failed or the PLM isn't getting power from the outlet. Did you check the cable between the PLM and the ISY

Under tools | diagnostics there's a scene test option which turns the scene on and off and opens up a level 3 diagnostic window with the command details. It also provides a list of devices controlled by the scene. This probably doesn't accomplish exactly what you're looking for but this is the only other tool I'm aware of that might help you out.

Which version of the ISY firmware and UI are you running A switchlinc is hardwired device, how are you plugging it in?. What's the model number of the device? If you remove the LED lights then run the diagnostics what happens? Plugging the PLM or other devices into a outlet strip could interfere with the Insteon signal. Try bypassing the strip

Run a diagnostics / compare link tables on the Switchlinc If you have any mismatched links then do a restore device which will rewrite the devices link tables. If that doesn't solve your issue then you most likely have a communications issue between the PLM and the Switchlinc What type of load is the switchlinc controlling?

What exactly are you trying to accomplish, why do you want to monitor group broadcasts. There may be other options.

Run a topology report (tools | Generate topology). The report is full of info including, at the bottom of the report, exactly what you're looking for.

One other possibility - if the units are linked manually it possible that the ISY doesn't have the correct/complete link tables. which may be causing the master to revert to the wired unit. What happens if you adjust only the wireless unit rather than the wired unit via the ISY/Mobillinc?

Set the wireless thermostat as a master. Does the master setting then, and should, turn off on the wired unit? Note: the manual states that the wireless unit must be linked to the master for this to work. I'm not sure if linking both units via the ISY accomplishes this or if you have to link them manually.

Try using auto detect and type in the device address xx.xx.xx If that doesn't work then you may have a communication issue with the device

There's no way to program or query a battery operated device remotely. They're always in the sleep mode to preserve battery life. The only other option is to use a magnetic contact switch coupled to an IOLinc

The battery signal and the on/off signal are totally independent of one another. It must have been something else.

Take a look at the attached file. What's the date code and version of your PLM. Is the green led on the PLM lit? When you boot up the ISY do you get any error messages? Did you also update the UI to 4.5.4?

Do the lights turn off when you turn the scene off The togglelinc relays probably respond to an either a scene on or off regardless of what their on level is set in the scene.

The ISY requires a separate power supply when you use the 2413S

Be careful, I just had to trash a 2441zth because the batteries leaked and destroyed the circuit board. There's no way to warn you if the batteries fail when you're on AC power.

The downside is that it has batteries that need to be replaced. I attached the manual. The IOLinc can be queried, the sensor can't. I prefer the IOlinc when I have an outlet close by. 2843-222 Open-Close Sensor.pdf

You might want to check these out http://www.homedepot.com/p/Lutron-Maestro-2-Amp-Single-Pole-Occupancy-Sensing-Switch-White-MS-OPS2H-WH/203202128

Keep in mind that the motion sensors don't really detect motion, they detect variations in temperature. As larryllix suggested it would be best to have two units mounted 90 degrees apart as the sensors work best when a person moves across the sensor path not into the path. Take a look at the coverage chart in the attached manual 2842-222 Motion Sensor Manual.pdf