lilyoyo1

Was the isy unplugged when swapping plms? The plm needs to be connected to the isy and posted up before the isy

You can already do this with Alexa and Google home. I'm not sure what you are trying to accomplish from the isy standpoint that already isn't possible

I wouldn't do it. While people have been able to get away with doing so, you could potentially shorten the lifespan of both products. Use the correct tool for the job. Do you really want to replace a $50 switch in 2.5 years over spending an extra buck for a dimmable switch?

It could be that too. You also have twice as many zwave devices as I do so more opportunities. Have you tried using the dashboard instead of AC to see if that cuts down?

I haven't had that issue. I do the same when I initially set up devices but then choose freeze once done. So far I haven't seen any new nodes but time will tell. I also dont look at my device tree unless I need something specific so that may contribute to why I haven't noticed

Probably not. Zwave creates new nodes sometimes. Just delete it. Then choose zwave>options>freeze nodes to prevent that from happening

I prefer hue over lifx. I think their setup is more robust though lifx lights themselves are better

You would need to use a nodeserver if you want things directly within the admin console. I prefer to set things in the app as its easier to see and manipulate, then add to the ISY.

I'm opposite of larryllix in that I use scenes predominantly and use programs to add capability to them. I prefer scenes mainly due to the fact that I have manual control over my devices regardless of the isy. For me, it's paramount that my system works outside of the Isy. If the isy dies how do you operate things? Unless you have one laying around your system is down until you get a new one. At least by setting scenes, you can operate the pumps from home with a kpl as needed until then.

You started all this. I need to find some old threads and restart them so we can argue again

True. But even then other devices would've done it (older devices)

Everything would've turned on with the all on.

Delete it from the isy and factory reset it. Leave it alone for a day. If it doesn't turn on by itself then there is something else within your scenes or programs doing it

If it's for the genie or the dish, neither should be plugged into it. Try a lamp for testing. Does your lights turn on and off at specific moments such as 5pm every time

If it was 1-12k the math is easy to do. But it's not. If a home is so small that having a smart panel and solar costs 12k are you really saving that much on an energy bill that may be 75-150 bucks max? That coupled with the fact that many people barely make it 5-10 years in the same home, they'll never get that money back. For large homes where you're looking at 30+. I remember someone came to the house trying to sell us solar. Long story short, after breaks it would've been around 45k. They talked about how much we would save (it was alot) etc. He went over their finance terms and our savings would've paid for the equipment. At the end of the day, we give up a cost that we can control for one (by using less energy) for a bill that will be there for a long time. I'm with you in that more should go into meeting the home itself energy efficient from the ground up. Outside of that I just can't see where its worth it.

Energy savings isn't much of an issue for me. I know if I use something its costing me money. With what solar costs and these smart panels, I would probably save more in regards to utility bills but not nearly enough to make up for what both systems initially cost and too maintain

No. There is no way to tell

Udi has made a point of not giving dates and I highly doubt that will change now or ever.

In general they are not needed in large installs of dual band devices. If it were my home, I would try to remove them from service as I hate looking at wall worts

Old age is a PIA. Lol. Yeah, it's the replace function

It shouldn't need to be removed just to write updates. Remote only needs to be in linking mode

Here's a link to a write up I did about zwave with the Isy. Hopefully it'll help you with a variety of things

Any hardwired zwave devices would work. I prefer using receptacles so that I don't have to worry about things getting unplugged or moved around (this can greatly affect your system). You can also use different plug in modules such as lamp modules or appliance modules. Aeotech has their 500 series range extender as well. The main thing is to make sure that whatever you buy is zwave plus

I wish I could help you with that one. I haven't used them. I don't think it matters as long as it's magic home. The software should be the same. Any strip light can be used however. Just make sure they are rgbww. That way you have full color and white

Any of them can be used with the magic home nodeserver. You'll just need the controller connected to your choice of led strip lights. There is also a hue and lifx nodeserver. For places I wanted color, I use hue