G W

Form some reason the ZERO gets removed. This has been a sore spot for years. Why a ZERO is removed from a string is something that has never been explained. Sent from my GT-P5210 using Tapatalk

I have the same issue. The remote is truning the light off (red blink) on the first press and the on (green blink) on the second press. Sent from my GT-P5210 using Tapatalk

I can certainly understand your position. Sent from my GT-P5210 using Tapatalk 4

That's why there is a keypad on the outside. Sent from my GT-P5210 using Tapatalk 4

@IndyMike One item I like about the Schlage is the auto lock feature. I have mine set to relock after 30 seconds. Sent from my GT-P5210 using Tapatalk 4

It looks to me like you have a firmware / UI miss match. Sent from my GT-P5210 using Tapatalk 4

There is also the fact that electric dryers are 220v and that is a 110 volt device. I'm sure there is a way to make it work, as there always is.

Ah yes. Using the wattage threshold would do what you want. Normally the dryer will shut off after drying. Then a set time later, it will run on and run in what is known as "wrinkle-guard" mode. On my dryer, this turns the drum but does not turn on the heat. If you have an electric dryer the wattage will remain low. Not sure how well this will work on a gas dryer.

In order to do what you want, you need something like this. IF status changed to OFF AND device was on for more than five minutes THEN send email ELSE do nothing I just don't know how to write this in ISY code.

Oh Michael, Please take care and rest. Our prayers are with you. Gary Sent from my GT-P5210 using Tapatalk 4

"Cloud" is just another name for "Internet" but it lets sales people sell more of the same.

FanLinc can't but I fully understand what he is asking. That's a neat idea and all you need is a small DPDT relay and the Micro module. Then program a button for 'Winter' to turn on the relay.

I have used keypads in cases like this. My house is full of keypads for this very reason.

What exactly are you trying to do?

'Ang about. It seems to me that Irrigation Requirement is calculated everyday, so it's not the Irrigation Requirement that needs to be saved. It's the values needed to calculate that number. The important value is etoYesterday. So, how is etoYesterday calculated AND how and where is it stored?

What if both are False? By your logic, If A OR B, then turn on Both.

Ecobee looks nice, but I don't have any faith in a company or product where you can find the products they sell and when you click on a BUY button it just takes you to the top of the page. They don't even list pricing or products. Epic Fail.

It's called Peel Smart Remote. It uses the IR blaster built into the tablet.

No. I'd add a FanLinc to each fan then a KeypadLinc to control the fans and lights. It sounds like you have four switches. You can replace all four with two keypads.

I use my tablet to operate my Samsung TV, amplifier, blue-ray, sound system and media-system. It's not connected to the ISY network, though I am looking for ways to control it via ISY.

Use a FanLinc.

Dang. So I should have kept the Zigbee radio module and bought a second ISY. Seems I am always making mistakes.

Interesting. I was not aware of this function. What is the reason for this and how is it used?

Picture a car radio with buttons. When you push one all the others go off. This is what grouping can do for you. I am using the right column of buttons to control a ceiling fan. The top button is High, then below that Medium, followed by Low them Off. Also set the buttons not to toggle. So when I push Low, only the Low button will light up.

To me, forms are filled in from the top down. Having Add at the bottom is one item that confused me. Also, the "Recipients" is confusing. I did not know that was a sort button. I thought I had to click on it to add an email address.