asbril

Great Michel, When you get close to ISY on Polisy and/or Polyglot 3, then give us a shout with some possible dates.

I am the handsome one

@Michel Kohanim, do you support the idea ?

Who else is game ?

OK...... I have this crazy idea What about, when Polisy is ready for Zwave and / or Polyglot 3 is released, some of us get together with Michel and his team, in LA, for a day of exchange of experiences ???? p.s. We would put @Teken and @lilyoyo1 on opposite sides of the table

Apples & Oranges. This ISY forum would not exist if that is what we are looking for.

I have 2 Mimo Lites that were installed with ZW 300 and now continue to work fine with ZW 500.

Thanks @xlurkr I just received and configured the Zen 32, with help from your post here. Like you, I configured the main button without a load and it turns ON or OFF a fan and lights in our master bedroom. The 4 other buttons are set as 3-ways, controlling other specific lights. What I have not been able tp achive is for the 4 other buttons to show the status of those lights. As an example, if I turn ON the entrance light of our bedroom using its own switch, then that status will not show on the Zen 32. Of course I can configure those Zen 32 buttons to show their own status, but not the status of another switch. Is there a way to achieve that ? BTW I noticed that the reaction time of the Zen 32 is extremly fast, probably because it is Zwave 700. It surprised me because I always believed that a Zwave mesh (I have some 80 Zwave devices, mostly Series 500) would always work at the lowest common denominator.

I opened the 443 port while attempting to access Polisy, and then closed it again, but I did not think of httpS. I am not sure that I fully understood your post. Is there another option to remotely access Polisy ? I believe that UDI has this in the works, but is there a temporary solution in the meantime (other than opening 443) ?

Last week I was abroad and wanted to access my Polisy. I believed to remember that this was possible using my home IP XX.XXX.XXX.XXX:443 (I opened the 443 port) but it did not work. Anyone has an idea how to remotely access Polisy ?

Mine works fine

I have never consciously checked this, but I believe that a power outage should not change the status of a Zwave plug. From your post I understand that you only have 1 Zwave device. In that case, you may have an issue of a weak mesh network and having more Zwave devices is recommended.

Can we get an icon for curtains ?

T H A N K S

Can you tell me how to change the settings to high sensitivity . If not I'll look it up. I am in a lazy mood today

Thanks @Bumbershoot I installed the switch. I changed the settings to manual in order to program the switch with my ISY and that works in principle. However, so far since yesterday, I am not impressed and my existing separate motion sensor does a better job.

Is anyone using the GE Enbrighten Zwave Smart Motion Switch ? I'd like to know whether it is programmable through ISY to activate/de-activate both the light load and the motion sensor. In principle, I would expect that this switch creates separate nodes for the light and the sensor, but I'd just would like know if someone has experience with this switch.

My best suggestion is to open a ticket with UDI's outstanding support.

What people may overlook is that you may have changed or deleted a device/node that was in the program. When that happens, an green error message appears in the program and then icon goes yellow. This happens to me also when I tinker with a nodeserver, such as removing the nodeserver and re-installing it. I have learned from experience that I then often forget programs that include a node from that nodeserver.

- ISY 994i ZW, Z, or ZS Series (Z-Wave/Zigbee and/or if you do NOT have a PLM)

BTW ISY is my work horse and the Administrative Console ( as mentioned by MrBill) is not browser based, I use Home Assistant in my browser to control my devices. This is even more the case now that @MrBill showed me how to control my ISY programs in Home Assistant. So if you like to use your browser, as I do, use the Administrative Console to create/modify your scenes and programs, and use Home Assistant to control your devices and programs. Home Assistant is also available for your phone, but the new UD Mobile works great on the phone. In conclusion this is my setup : Administrative Console on my windows computers to add/remove devices; to create and modify scenes and programs. In my browser (Chrome) : Home Assistant to control devices, scenes and programs On my Iphone : UD Mobile and also Home Assistant (*) (*) Home Assistant requires monthly subscription to use outside of your local network, so UD Mobile is right now the ideal solution. I believe that eventually UD Mobile will also work in your browser, at which time HA becomes a secondary option.

The Administrative Console is (still) Java based and is the most logical way to create and manage your scenes and programs. You must make sure to exactly follow the steps listed in the version of your ISY ( https://forum.universal-devices.com/forum/15-current-release-betas-and-bug-reports/ ), including the launcher and Java instructions. Let us know if you have further questions/issues.

Thanks, I just added the favorites widget !!!!

Though it is really quick & easy to click on Favorites, I would also like to have Favorites as the first screen when opening the App.

Though it is really quick & easy to click on Favorites, I would also like to have Favorites as the first screen when opening the App.