Athlon

A little more detail on removing Nodes from PG2: Go to the PG2 Node Server Store. You should see an Uninstall button next to each Node you have installed.

I moved to Polisy from an ISY, so now I have IoP. I have Insteon, TP-Link, Ecobee, Harmony, Sensibo, IFTTT, Roomba and a Virtual Switch running on it. All are Node servers except for Insteon of course. My 'voice' system is Alexa. They all run without a hitch, and it was easy to set up. If you get stuck or have an issue the support here is fantastic. I do not see a Node for Flux Smart, however I did find this: https://github.com/beville/flux_led A developer here 'might' be able to make use of it...

Exactly my experience. My time with the Hub was however long it took to get my first ISY. It was the lack of time offsets that did it for me. Before that I was using a program to control my X-10 devices that have since been retired..... Stu helped me with wiring my first 3 way dimmers......

Brings a new meaning to one of my wife's favorite phrases: "I fried!" ?

Genius ? 2.0.3 is much better! Thank you!

PM sent

I have no problem with that at all. I'll PM you when I can from home later unless I can do it soon from my phone.

Yes, by using the phone app. Actually, for my purposes, the node server is usable for me. I use my mini splits (4 of them) to augment heating in the winter. I have a program in ISY that turns them on and off based on my Ecobee temperature sensors (using the Ecobee Node server). I've been using IFTTT for that, so having it local now is great. The program also checks the outside temp as using the mini splits as inverters is not very efficient when it's below 20 degrees F outside. The remotes that came with them (Mitsubishi) use RF, but with each button press other than 'On' or 'Off' they send ALL of the settings at once somehow. (So I can't use a device like a Harmony for example.) That is why I bought the Sensibo devices - they do that as well. Just changing the temp with those remotes also resends the commands to automate the directional fins, whether or not to heat or cool and a few other settings. Even with the limited capability of the Node server - I can use it in ISY to just turn them on and off - so what I said earlier about confusion with the Node server and Alexa is not a problem. However, to use the Node server for more than just 'on' and 'off' (like setting a temperature) is not possible for me without that confusion.

If I knew more about programming I would tackle this for sure. I may be way off on what I found, but in the file at github /profile/editor/editors.xml is the temp range allowed in my AC (18 to 30). And in the API it refers to "temperatureUnit": "string", but 'temperatureUnit' is not in any of the files at github (that I could see). I wonder if that's meant for celcius or farenheit.

Forgot the screenshot:

As with the PG2 version, there is a mix of fahrenheit and celsius (see screenshot). It would be great if it could have 'all fahrenheit' as a choice. I could set the transmitters to Celsius to match the Node server's only choice, but then when my wife changes the temp using Alexa they would be way off. I understand you may not own any of these, so I'm happy to assist in any way you need me to. And - I found this: https://support.sensibo.com/l/en/article/73outalwmi-sensibo-api-overview

That did it - thank you!

It won't start. I tried restarting it a few times after refreshing the store. (2.0.1 shows in the store.) Thanks for your help with this. I PM'd another log.

@bpwwer Log PM'd

I just installed this PG3 Node Server. It's showing 0 Nodes. (I added an API key obtained from my account at Sensibo.) I had the PG2 version installed at one time and it added all 4 Skys. I didn't use it much however because of its limited functions. I just saw this PG3 version today and thought I'd try it out. I have 4 Sensibo Skys in my home.

I think you mean ISY v5.4.4

That link does not show your thermostat... Why would you connect it to your ISY? Perhaps that's up to your imagination. For example, I use some data from my thermostats (Ecobees) to run other programs. YMMV.

Thank you!

I suggested photo paper because of it's thickness. Also - try using a hobby knife or razor blade with a straight-edge ruler to cut them out. https://www.amazon.com/Xacto-X3201-N0-Precision-Knife/dp/B00004Z2TQ/

I wonder if photo paper would work as well - either matt or glossy depending on the look you are going for. Great idea @Ross!

I don't have any Hue devices, so I'll leave it to someone else to chime in here. Or - is there a way for your Hue hub to be put on a delay, or to restart again after a power failure?

I've been running ISY on Polisy (IoP) for some time now. After a power loss everything starts up fine. Once in a while I may have to restart a node server - that's it.