Needed to change some hardware, came with v5.0.13D. After advice here and from support, elected to restore from v4.6.3 backups.

Seemed to go OK, from what I can see so far, but four programs have an "unsaved" state (I did already force a save once, actually twice, and restarted), they are listed below.

They also curiously have a "Response type 10", have no idea what that means, probably part of the issue.

* Orest

_____________________________________________________________________________

queryAll - [ID 0002][Parent 0001]

If
        Time is  2:45:00AM
 
Then
        Response type 10
 
Else
   - No Actions - (To add one, press 'Action')
 

_____________________________________________________________________________

query tstats - [ID 010C][Parent 0001]

If
        Time is 12:00:00AM
    And Time is  6:00:00AM
    And Time is 12:00:00PM
    And Time is  6:00:00PM
 
Then
        Response type 10
        Response type 10
        Response type 10
        Response type 10
 
Else
   - No Actions - (To add one, press 'Action')
 

_____________________________________________________________________________

tstat high.sense - [ID 01CB][Parent 0074]

If
        (
             'thermostats / MAIN - tstat - 2.2 -' Temperature > 27.0°
          Or 'thermostats / Master - tstat - 2.2 -' Temperature > 27.0°
          Or 'thermostats / UpStrs - tstat - 2.2 -' Temperature > 27.0°
          Or 'thermostats / SLRM - tstat - 2.2 -' Temperature > 29.0°
        )
    And Program 'var tstat high' is False
 
Then
        Wait  1 minute
        Response type 10
        Response type 10
        Response type 10
        Response type 10
        Wait  1 minute
        Run Program 'tstat high' (If)
 
Else
   - No Actions - (To add one, press 'Action')
 

_____________________________________________________________________________

tstat low.sense - [ID 01CC][Parent 0074]

If
        (
             'thermostats / MAIN - tstat - 2.2 -' Temperature < 15.0°
          Or 'thermostats / Master - tstat - 2.2 -' Temperature < 15.0°
          Or 'thermostats / UpStrs - tstat - 2.2 -' Temperature < 15.0°
          Or 'thermostats / SLRM - tstat - 2.2 -' Temperature < 15.0°
        )
    And Program 'var tstat low' is False
 
Then
        Wait  1 minute
        Response type 10
        Response type 10
        Response type 10
        Response type 10
        Wait  1 minute
        Run Program 'tstat low' (If)
 
Else
   - No Actions - (To add one, press 'Action')
 

 

It appears this is a placeholder for statements it can't translate. These are a SCENE query and a THERMOSTAT query.

OK, fixed those.

Scanned through 8000 lines of code ...

Looks like it was mainly adding [Not Enabled] to a few dozen functions, which stopped the weird house behavior, not surprising!

The backup/restore did go pretty smoothly. But moving to v5 is not a trivial exercise, if your application is well developed. But, I suppose you have to do it sometime, and now I can start checking out all the new features.

Is there a good top level summary of these, somewhere?

* Orest

Edited May 1, 20196 yr by oskrypuch