btreinders Posted November 22, 2022 Posted November 22, 2022 I had not done the upgrade packages in a while so I decided to run it. Now I have 5.4.5 and the factory query says unrecognized action. I don't see any threads yet on 5.4.5 so I am wondering why it would upgrade the version.
larryllix Posted November 22, 2022 Posted November 22, 2022 On 11/22/2022 at 4:05 PM, btreinders said: I had not done the upgrade packages in a while so I decided to run it. Now I have 5.4.5 and the factory query says unrecognized action. I don't see any threads yet on 5.4.5 so I am wondering why it would upgrade the version. Expand shhhhhh.... it's a secret upgrade that reports back without your knowledge. oooops! Did I say that outloud? I installed it also. I didn't see any of my bugs I have been watching so I was also looking for a "review" thread. I wasn't sure whether I could start one.
btreinders Posted November 22, 2022 Author Posted November 22, 2022 On 11/22/2022 at 4:41 PM, larryllix said: shhhhhh.... it's a secret upgrade that reports back without your knowledge. oooops! Did I say that outloud? I installed it also. I didn't see any of my bugs I have been watching so I was also looking for a "review" thread. I wasn't sure whether I could start one. Expand 🤣
btreinders Posted November 22, 2022 Author Posted November 22, 2022 I put the Set ISY to Query back in there and ran it and the ISY locked up at about 66% system busy.
MrBill Posted November 22, 2022 Posted November 22, 2022 On 11/22/2022 at 5:48 PM, btreinders said: I put the Set ISY to Query back in there and ran it and the ISY locked up at about 66% system busy. Expand I doubt anyone except @Michel Kohanim can answer, you might want to open a ticket for a speedier connection to him.. let us know the outcome! 2
larryllix Posted November 22, 2022 Posted November 22, 2022 On 11/22/2022 at 5:48 PM, btreinders said: I put the Set ISY to Query back in there and ran it and the ISY locked up at about 66% system busy. Expand FYI:Mine installed and initialised without any problems. I haven't found any changes from v5.4.4 yet though. However is did cause me to spell some words funny.
brians Posted November 22, 2022 Posted November 22, 2022 I have long disabled Query on startup since it seems to lock up the ISY for long period of time and proves troubleshooting difficult. I write my own query app that I maintain manually for only the things I require to query on startup. I set the program to run at startup. Some things don't have query option in program like Zen17 binary sensor so I use a network resource. I still let Query run at 3am and seems to work, but while it is running makes ISY unusable, especially after an update.
Geddy Posted November 22, 2022 Posted November 22, 2022 On 11/22/2022 at 6:06 PM, larryllix said: However is did cause me to spell some words funny. Expand You're Canadian (🍁), you've always spelled words funny. Wasn't the secret IoP update that made you do it! 3
btreinders Posted November 22, 2022 Author Posted November 22, 2022 On 11/22/2022 at 6:50 PM, brians said: I have long disabled Query on startup since it seems to lock up the ISY for long period of time and proves troubleshooting difficult. I write my own query app that I maintain manually for only the things I require to query on startup. I set the program to run at startup. Some things don't have query option in program like Zen17 binary sensor so I use a network resource. I still let Query run at 3am and seems to work, but while it is running makes ISY unusable, especially after an update. Expand Yes, it does take a long time so I delayed mine 1 hour after reboot for troubleshooting purposes instead of manually querying things I need to. That said, I have never had it lock up the ISY completely like it is doing now. Guess I will just disable it and manually query for now. Thank you for all the replies!
MWareman Posted November 26, 2022 Posted November 26, 2022 IoP appears to now be IoX - mine upgraded seemingly fine. However, the backup is throwing an error (I documented in another thread)
sjenkins Posted November 27, 2022 Posted November 27, 2022 Just did a "packages update" from ISY (or IoX) menu. Didn't come back on-line. Normally do a button push in this state but was in my comfy chair so did a sudo reboot from ssh; came back fine after that. Yes, had a 20sec pause for query, but nothing over the top. Backup of 5.4.4. before update was fine and the 5.4.5 backup after was also fine. Way back in time the last instance when my backup wouldn't work for me I had to revert then re-upgrade to make everything happy again. That was in the 994 and was early 5.0's.
btreinders Posted November 27, 2022 Author Posted November 27, 2022 On 11/27/2022 at 4:32 PM, sjenkins said: Just did a "packages update" from ISY (or IoX) menu. Didn't come back on-line. Normally do a button push in this state but was in my comfy chair so did a sudo reboot from ssh; came back fine after that. Yes, had a 20sec pause for query, but nothing over the top. Backup of 5.4.4. before update was fine and the 5.4.5 backup after was also fine. Way back in time the last instance when my backup wouldn't work for me I had to revert then re-upgrade to make everything happy again. That was in the 994 and was early 5.0's. Expand So your factory query program is still all good? Here is what mine looks like after the install and after I added back a set ISY to query to it.
sjenkins Posted November 27, 2022 Posted November 27, 2022 On 11/27/2022 at 4:50 PM, btreinders said: So your factory query program is still all good? Here is what mine looks like after the install and after I added back a set ISY to query to it. Expand Yup ; no issues or changes with mine.
landolfi Posted November 28, 2022 Posted November 28, 2022 (edited) Just a heads up that in my case the package update to 5.4.5 caused a "System Busy" updating loop that I eventually had to reset my way out of. I waited for 4 consecutive cycles of System Busy that lasted about 10 minutes each before deciding to reset, but everything seems to be working OK now. The only way I noticed anything was up after the update was none of my sunset programs ran and I noticed during the busy cycle that my sunset and sunrise times were both 00:00. Edited November 28, 2022 by landolfi
btreinders Posted November 28, 2022 Author Posted November 28, 2022 On 11/27/2022 at 8:50 PM, sjenkins said: Yup ; no issues or changes with mine. Expand Thank you. Can someone tell me if what I did is the same as the original factory query?
Geddy Posted November 28, 2022 Posted November 28, 2022 On 11/27/2022 at 4:50 PM, btreinders said: Here is what mine looks like after the install and after I added back a set ISY to query to it. Expand You've got some strange comments in there and the "Factory Query Program" isn't commented out. I'd remove those lines and if you want/need comments in there add them back. My query program is just like yours, but no comments: 00-KEEP-ISY_Query - If Time is 3:00:15AM Then Set 'Polisy' Query Else - No Actions - (To add one, press 'Action') 1
Recommended Posts