x046866x Posted December 6, 2023 Share Posted December 6, 2023 I've noticed that over the past week or so none of my timed programs were executing. I have a couple that turn lights off at 10:30PM every night but I woke up in the morning to find all the lights still on. I performed a reboot and everything seemed to work for about 4 days and then exhibited the same behavior (all lights on in the AM). I also noticed that on every reboot I get a message telling me the "Upgrade complete!", but I don't think it is actually upgrading every time. I did it twice in one day and receive the same message every time. I did it again this morning and received the "Upgrade complete!" notification. Thoughts? Link to comment
Goose66 Posted December 6, 2023 Share Posted December 6, 2023 I get that too. Something in whatever version IoX I have. Hopefully will stop in some future release. Link to comment
Whitehambone Posted December 6, 2023 Share Posted December 6, 2023 I also get the "Upgrade complete" message on reboot. Just this morning my timed programs were not working (morning lights with motion). A reboot fixed the problem. It seems something strange happens about once a week, like programs not working or the eisy is offline. Link to comment
DennisC Posted December 7, 2023 Share Posted December 7, 2023 22 hours ago, x046866x said: I've noticed that over the past week or so none of my timed programs were executing. I have a couple that turn lights off at 10:30PM every night but I woke up in the morning to find all the lights still on. I performed a reboot and everything seemed to work for about 4 days and then exhibited the same behavior (all lights on in the AM). I also noticed that on every reboot I get a message telling me the "Upgrade complete!", but I don't think it is actually upgrading every time. I did it twice in one day and receive the same message every time. I did it again this morning and received the "Upgrade complete!" notification. Thoughts? You don't mention which device you are using and your firmware version? Try power cycling your unit. Link to comment
Geddy Posted December 7, 2023 Share Posted December 7, 2023 @x046866x, @Goose66, & @Whitehambone I suspect this is part of a known issue with a recent "behind the scenes" update that is causing issues. There's another post about it where @Michel Kohanim says a fix is in the works. Link to comment
Solution Michel Kohanim Posted December 7, 2023 Solution Share Posted December 7, 2023 Hi All, this is already fixed. With kind regards, Michel 1 Link to comment
Recommended Posts