Teken

Hello Mitchel, The previous 7 nodes were removed. The GEM was also removed via the diagnostic menu. The ISY began to add in the 32 GEM channels. Sorry to report all 32 channels remain blank. I have rebooted the ISY, the compatibility mode has been toggled to all with no positive change. I am thinking perhaps its because the GEM is set to emulate 1 ecm 1240? Also, since this new firmware release, should the GEM not be programmed to start to use the ISY format packet? Insight Teken . . .

Installed 4.0.3 with out issue. The GEM was showing some limited data on the ISY prior to the upgrade. Now, the ISY does not show anything in the first 7 channels. I have to gather I have to change the GEM back to simulate three or more ecm-1250's? Please confirm if this is the case . . . If there is a step by step guide as to what I should be doing in either controller(s) please do let me know. I will pose the same question to Ben at Brultech and hope they can provide some insight. Since they do not have a ISY controller I am hoping this 4.03 firmware build was tested on UDI's GEM unit. If so, please do let me know what settings need to be configured to see all 32 channels etc. Teken . . .

Selecting the test button with the high lighted group will only send a broadcast to those listed. Teken . . .

I am subscribing, as I too am interested in the final outcome. Teken . . .

I know I was able to do this on a older KPL. It was done by accident at the time of programming. This was about the same time I noticed that the ISY did not track and follow what I expected the levels the system said it would? Pressing the levels in both up and down to achieve the back light was fruitless. Now, somewhere doing the manual method I was able to do exactly what the OP stated. Keep in mind the LED is still lit (even if extremely dim) when pressed. But, for all intent its as close as you can get to being off / dimmed off. Teken . . .

My personal experience with metal box's is the dual band is pretty none existent. In Manitoba metal box's are required for new home builds. Retrofits, or home owner jobs can use any of the none metal box's. I plan on using the fiber style boxs as they are stronger and don't flex / break. Teken . . .

Hello Alan, Perhaps you would research for a strain gauge element. http://en.wikipedia.org/wiki/Strain_gauge If you find anything that is value priced, please do let me know. As I too am interested in something that would inform me of the presence of a occupant. Teken . . .

Perhaps we are not on the same page. I had no problem using the link you provided on the LAN, but how does that help me accessing the Admin Console remotely using HTTPS ? If the Touchswitch is pointing to a different UI how is this corrected? Teken . . .

Hello Michel, I have appended both the certificate and the encryption level the browser is using. All of which makes no difference in the ability to access the ISY via HTTPS. Also, my reply about accessing the ISY was to the public address using HTTPS. Upon selecting the public address using HTTPS, I have no problem getting to the Touch Switch home page. Upon selecting the *Admin Console* at the bottom of the web page when the Admin Console launches it produces the two listed error's which I have already appended to this thread. I only access my ISY Insteon network via HTTPS and it has always worked. Now, with the latest release I do not have the ability to do so. I hope this information provides more insight to the matter. As always, much thanks and look forward to a solution. Teken . . .

I am using SSL v3 which I have confirmed with you, and also provided a screen shot of such. The HTTPS access issue is still present so I am not sure how it can be related to SSL v2. I have done absolutely nothing to any of the 6 computers in my home. Simply rolling back the ISY firmware corrects this issue. Now, for the sake of doing a test to confirm and validate my findings for the benefit of the forum members. I have also uninstalled Java, installed the latest and greatest. Removed the certificate from all known browsers and requested a new cert be generated using any level of encryption with out success. All browsers have been cleared of cache / cookies, along with the Java console. Adjusting every browser to the lowest security setting along with adding the ISY to every known fire wall, policy, and to the browser has no affect. Simply put, I am out of ideas as it pertains to why this latest version of ISY does not allow HTTPS access either locally on the LAN, or remotely. Teken . . .

Michel, That is a great gesture and is much appreciated. But, my comment is about the SmartLinc is that it provides me the ability to access the home with out network related issues. As long as you can access a web page / address the home is accessible. The ISY relies on a Java application which in many environments do not allow such apps to run, or be hindered when its required to launch. Having said all of this: My feed back is to provide the information pertaining to issues that affect the ISY and those members. Is this not why this forum and thread is here for?? Lastly, as I stated previously above, rolling back to the last stable ISY firmware corrects this HTTPS issue. This is not related to my homes network or any firewall, or policies. I hope this is clear on all points and appreciate the on going support the team has provided. Teken . . .

I continue to experience this problem. It is not my computers or the network at home either. Rolling back to the previous versions corrects this problem. Now, at work our firewall and policies are at play so I have no expectation in connecting. This is why I am a firm believer is using the SmartLinc. No headaches with Java and all of the frustrations in making it work. Just silly . . . Teken . . .

I would like to know if this is on the UDI road map. In the House Linc 2 the software application has the ability to upload new updates to any RF Motion sensor. Once the user awakens the RF Motion sensor it will remain in a ON state to receive any new updated programming. I know this question has been asked quite a few times and I have received various replies in some cases. But, unless I am missing the obvious how is this accomplished *Assuming* this feature exists? To be clear I am asking that (I) simply have to walk in the path of the RF Motion sensor to awaken it, and then the unit will remain in this state until all new programming / firmware updates are loaded. Currently, I have to climb up on a blasted ladder and remove said sensor, remove screw, cover, and then hold the idiot button until the LED starts flashing. Having more than 12 of these sensor(s) deployed and some being as high as 20 feet on the outside is NOT a fun task! I would greatly appreciate if THIS feature could be pushed forward in the next few releases. As this is one of the major holes lacking in the power of the ISY platform. Much Thanks Teken . . .

Hello Michel, I have enclosed a screen shot of the certificate Opera is using. Please note I am getting the same errors with IE 8. I will submit my remote URL now to the support address now. Teken . . .

Hello Michel, I normally use Opera (Version 12.02, Build 1578) on all of my machines which has the same problem. I will try using IE / Chrome and see if it makes a difference today and report back. Teken . . .

I have no problems getting to the web page which uses the *Touch Switch* interface. It is when you click on the Admin Console you see the Java whirling wheel trying to load. About 5-10 seconds the two pop up messages appear: XML Parse Error HTTPS: xxx.xxx.xxx.xxx desc appears. The second pop up is what I have uploaded here. Teken . . .

Hello Michel, Unfortunately, I am having this problem on all Windows 7 machines. Some are 32, others are 64 bit. Teken . . .

How does one login to the ISY using port 443 now? No matter what I do the system cries saying it can't be done? The *About* does indicate and confirm the correct UI / Admin 3.3.2 firmware. Java cache along with the Internet browser has been cleared. Installed the latest Java run time with the same secure login errors. I have no problems login via the unsecure method. I attempted to install a new certificate and it appears to make no difference. I have appended a screen capture of the error message. This has nothing to do with firewall / anti-virus as it has all been either turned off or set to be white listed. Seems to have happen since this update?? Teken . . .

The board layout and design from Venstar took these simple problem into account. Obviously, Smarthome did not in this case . . . Teken . . .

I see the 2441TH in the New Device pull down menu but not the 2441ZTH. Do you just use the 2441TH device when adding the 2441ZTH? I'm still interested in these even though I sent my original one back. Does anyone know if they've resolved the triacs heating up the temperature sensors yet? Also, the remote wireless version wouldn't have that problem since it's not actually controlling an HVAC unit. Andyf0, They have not resolved the triac issue as of yet. Teken . . .

You can not use those for the Remote Linc 2. Those plastic chicklets only fit on to a KPL. The buttons on the Remote Linc 2 do not come off. I have used a label maker and over all its acceptable. Teken . . .

I believe this upgrade is intended for the new TSTATS and not for the 1700,1800, 1900 series dongles. Teken . . .

Blueman2, What are you trying to accomplish in doing this? As you stated clearly, attaching the device to another phase would introduce a potential of 240 VAC. That is not something you would like to do or experience should a fault occur. I am curious to know what it is you're trying to activate / sense though. Teken . . .

Thank you both for your continued support and contributions! Teken . . .

aLf, I appreciate the feed back and insight. I would humbly suggest that you put the old Generac on sale via EBAY, Craigs List. These dealers are like car dealers, they always try to low ball you when they know the very same item could be sold for more. Please keep us all updated on the new generator and how it performs. Teken . . .