Michel Kohanim

Hi Grizzy, If you are using our website URL (admin.jnlp), then every time you bring up ISY Finder, Java checks the date and certificate for all the files. If there are network issues or too much load on the server, then I can see there being a delay. You can always use the Admin Console directly from ISY using your browser (http://isy/admin) and this should be quite fast. With kind regards, Michel

Hi David, Thanks so very much. That's fantastic!!! With kind regards, Michel

Hi oberkc, Mike is partly correct since, the new ones, do not have the battery mode and the only way to figure it out is to know the firmware version. I am glad you like the experimentation! That makes one of us!!! With kind regards, Michel

Hi oberkc, It all depends on the version of the firmware: older firmware didn't support IDREQ and thus AutoDiscover will not work. Most new sensors that support I2CS also support IDREQ. There's really nothing wrong with version 0.0 except that in the case of these sensors, the version has meaning as to the functionality (i.e. does it have heart beat, etc.). With kind regards, Michel

Hi all, We have requested developer access alas not a peep. With kind regards, Michel

Hi outsider, If this has not yet been taken care of, the issue is definitely related to firewall. Try https (instead of http) to connect to your ISY and retry. With kind regards, Michel

Hello all, Are you using Link Management | Link Sensor? Please note that I2CS devices do respond with IDREQ so if you use Auto Discover and enter the address, then you should also get the firmware version. oberkc, I am pretty confident that this has not much to do with All On issue. With kind regards, Michel

Hi richaree, I totally agree. Also, we do offer refurbished units (with full warranty) starting at $99.00 for ISY994i. With kind regards, Michel

Hi Michael, So, what you are suggesting is a virtual network resource, correct? With kind regards, Michel

Hi Michael, Unfortunately, at this time, the end device must support ISY APIs which include a URL and properties. This said, I will ask Chris. With kind regards, Michel

Hi Scyto, Unfortunately that's a little difficult without replication since the EEPROM structure has changed and there's really no way to migrate it. This said, yes, our ultimate goal is to make it easy. With kind regards, Michel

Hi Scyto, Virtual nodes allow you to incorporate network nodes into ISY (so, you might not need network resources) and then use them in programs + be able to send them applicable commands. So, in essence, yes, you can have energy monitor nodes (have to be defined by you) and then Automation Shack or some other device (such as Brultech Dashbox) can publish events into those nodes. With kind regards, Michel

Hello everyone, Unfortunately the LEDs are tied directly to GPIO pins on the cpu through pull up resistors. This will require BOM change (resistors) and since they are blue, increasing the resistor value may cause flickering and blinking. jwf, I wanted to let you know that I responded to your ticket alas the email provided was wrong and no phone number was provided. With kind regards, Michel

Hi GGITech, Yes definitely but I just cannot give you an ETA. It will based on a different chipset so, in all likelihood, will require a different module. With kind regards, Michel

Hi GGITech, Although Zigbee devices might be plenty, they are usually not interoperable. High on our list: 1. Program/Variable enhancements (done) 2. Virtual nodes (almost done) 3. Z-Wave enhancements (next) With kind regards, Michel

Hi GGITech, In 4.2.x branch, scenes are INSTEON specific and, since you don't have the PLM installed, you are going to get that error. Do you plan on ever having a PLM? With kind regards, Michel

Hi Idrinc, I am so very sorry to hear. Please do be kind enough to contact our support (links below). It seems that you have a corrupted file system. With kind regards, Michel

Hi jellis, Sincere apologies for tardy reply. I was looking up some information. Attached table describes what ISY is trying to accomplish. Please note: Allowable depletion (inches) is a calculated output from the above. This is provided as a “guide” on how much depletion to allow/water to apply. Root depth and Absorption Factor are both very important and will dramatically increase the allowable depletion. For instance, for my yard, I have: 1. Absorption Factor: 60% (on a steep slope) 2. Root Depth: 5 inches 3. Soil Type: Sandy Clay Loam Allowable depletion is 0.375 and thus water applied per cycle is 0.625 (it's multiplied by Absorption Factor). Hope this helps. With kind regards, Michel

Hi sandpiper, I am so very sorry to hear. Now that you are back up and running, please do make sure to take a backup. With kind regards, Michel

Hi Walt N, Please submit a ticket and I would be delighted to help. With kind regards, Michel

Hi mykanderson, Would you be kind enough to fill out this form? https://www.universal-devices.com/device-support/ Thanks in advance and with kind regards, Michel

Hi MeDoISY, Can you please send the following to support@universal-devices.com: 1. Screenshot of the Admin Console | Help | About 2. Screenshot of the Admin Console when you click on your new 2633-222 3. Go to http://your.isy.ip.address/rest/nodes, save as a new file With kind regards, Michel

Hello everyone, Just a quick update on our PLM: we are still negotiating with SmartHome vis-a-vis flashing INSTEON chips. Furthermore, we are working with SmartHome to see whether or not we can address the All On issue once and for all. Unfortunately I really do not have an ETA. So very sorry. With kind regards, Michel

Hi jellis, Yes you are correct. Can you please let me know where to find the watering instructions for your grass? With kind regards, Michel

Hi jellis, This may be due to the fact that some stations return NULL (instead of zero) when it's not raining. We have added a workaround for this in 4.2.28 (to be out within a few minutes). The reason you cannot find the location is because you have a personal station. With kind regards, Michel