andrew77

Indeed!

Hi Larry. That seems to have fixed it. thank you very much for that.

Hi guys, just giving this topic a bump in hopes to get some help.

Just tried it. Same result. The KPL in question doesn't light even though its in all the scenes and seemingly correctly set up. What should my next step be?

I have made Alexa aware of the changes. I’ve also removed the scenes from the portal and Alexa, then re added them. still no luck The odd thing is I have 5 scenes and one works where the rest don’t light up the one device. any help would be great. drew

The echo units recognize the scenes and turn them on except for the hallway. When i tell her to turn on the hallway separately she does. I've programmed the scenes into a mini remote and they trigger fine. I did recently replace the hallway device (KPL) with a newer one as I had issues with the old version responding. I deleted toehold one and replaced it with the new one in the Portal and in the online Alexa Smarthome browser. Clearly I've missed something but I know not what. Drew

I followed these directions and everything worked perfectly. I do see now that Alexa says she doesn't recognize the device. Is there fix for that?

I have a KPL (old version) that doesn't respond to Alexa well most of the time. Heres a bit of history Anyhow, I've purchased another KPL and I know theres a specific order in which to switch out the old for the new and I don't want to screw it up. I searched on the forum but couldn't find the posting detailing the exact steps. If someone can point me to it that would be great. Drew

I have a SWL (older one) Through Alexa I called it Kitchen Uppers and it had an issue with the word Kitchen So I called it Uppers and that seemed to work for a while. It would start asking "You have Smartlife enabled. Do you want to open it?" I have an on off water valve for the gardens (Owfeel WiFi Smart Valve WiFi Control Water Valve ) and Smartlife is the app that controls it. So I renamed it yet again. Countertop. And if I tell it to turn on 20% (or any percentage) it asks "You have Smartlife enabled. Do you want to open it?" Is there any way to stop this? Drew

Just giving this topic a bump to see if anyone has any thoughts or solutions. Drew

I have a SWL and a KPL that are always problematic when I give voice commands. The KPL rarely responds when I tell it to react in a scene (IE turn on upstairs 20%) It'll do nothing until I say Hallway 20% ands usually after a few repetitions. The SWL is pretty much the same. This tends to get a little frustrating. Any thoughts? Drew

This worked great when I called it Skywalker. Is it too many scenes/devices/etc with the word Basement in the name? Is there a fix for this or do I have to 'turn on Skywalker' for the rest of eternity?

Just checking to see if anyone had any thoughts on this issue? When I ask this KPL to turn on 30% (or any percentage) Alexa asks "Did you mean Basement Living Room?" When I say yes she just turns it on 100% Every other device (KPLs included) have no problem turning on to any percentage. The lights being controlled are dimmable. As faros I can see theres no difference in the basement KPL set up from any other in the house. Drew

Sorry that should have said Theater Room. I have the SWL device in the ISY and ISY portal as ‘Theater room’ and the Alexa app online recognizes it. Exactly like everything else. nothing else had the word Theater in its description or name. Just as an aside I had to chance the name from theatre room to Theater room because she didn’t recognize that word.

I noticed the issue was still lingering intermittently. I live rurally so I always blame terrible internet service first and foremost. I will try that too thank you.

the title pretty much says it all. I'll ask her to turn on heater room and she'll ask that every time. She then does it but this behaviour is new. Is it an internet thing? Or a device issue?

Just giving this post a bump. Hoping someone has had this issue or a solution. Should I try to Restore Device?

I did as you said. I named everything Sink instead of Kitchen Sink, etc. Worked great. Thank you for that. Drew

I'll check them out. Does anyone have any suggestions to fix my KPL issue?

I have other rooms with similar setups and don't have a problem. (i.e. Big Room is a scene that triggers fine. Big Room Ceiling, Big Room Wall Sconces, etc are devices in that scene.) The Kitchen is basically the same. I have a scene called Kitchen. I'm pretty sure it used to trigger Kitchen Sink, Kitchen uppers, Kitchen lowers but now it says "A few things..." the scene triggers off a KPL C button fine. Just telling her to turn on Kitchen has recently been an issue. Drew

I've had this issue for a while now with the KPL. Larry, what's a CAO? Other KPLs can take a command for a percentage, just not this one in particular. Is there something I can do to fix this? (i.e. rediscover or whatnot) Drew

I have a scene called Kitchen. I have lights in it called Kitchen Sink, Kitchen Uppers, Kitchen Lowers. I have a scene called "Kitchen" and the voice command is called the same. When I tell her to turn on "Kitchen" she says "A few things share the name Kitchen, which one do I want?" Nothing else is called Kitchen. I don't have two scenes called kitchen, or a routine, nothing that I see. If I make the voice command Wombat it works. I'd like it to be Kitchen as I don't want to say Turn On The Wombat on a daily basis. (nothing against wombats) Drew

I have a few KPLs and it seems I have an issue with a voice command for one. For the load (A button) I cant seem to tell Alexa to turn the light on to a percentage, just on or off. Its registered as a light in the ISY Portal, Alexa's online GUI has it just the same as the other lights. I must be overlooking something but I'm not sure what. Drew

So it turns out it depends on how you search the Portal to check the scene. If you click on the drop down to search by scene it doesn't show you the spoken phrase (picture 1) If you search for the scene with the search function (picture 2) it shows you a slightly different screen that includes the spoken phrase (picture 3)

Success. I had a Group in the Alexa website (I'm not sure what to call the page) called Library. I deleted it and now I can call the SWL Library and it behaves as it should. Just leaving my findings here to help someone else if they have the same issue