-
Posts
4634 -
Joined
-
Last visited
Everything posted by Jimbo.Automates
-
Using the portal I control the fanlincs by adding spokens for the low, medium and high scenes, that's the only way I know of. Thermostats are not directly supported thru the portal, Michel has said they are working with Google on it. Sent from my Pixel C using Tapatalk
-
Anyway to push voice alerts/notifications to Home?
Jimbo.Automates replied to switzch's topic in Google Home
It is possible to send announcements to google home to speak, but if you are currently playing music then it will be interrupted and not resumed. That was a deal killer for me so I haven't pursued it further. If someone figures out how to get around that, then I will look into it again. There was a thread discussing this one here a few months ago. http://forum.universal-devices.com/topic/21252-speak-google-speechaudio-to-home-assistant/ -
EE Times article by Michel Kohanim
Jimbo.Automates replied to Michel Kohanim's topic in Official News and Announcements
Nice article! Noticed "Node Metal Model" should be "Node Meta Model"? -
I actually had one of mine start opening randomly a few years ago. After a lot of debug it turned out to be an issue with the remote receiver, genie agreed and sent me a replacement board. Sent from my Nexus 6P using Tapatalk
-
The mimolite works great and is a direct swapin replacement for a iolinc with relay and sensor. Sent from my Nexus 6P using Tapatalk
-
You don't need both. Agave is way better on Android then Mobilinc and Agave works perfectly with the UDI Portal, which also works very well with Google Home. Sent from my Nexus 6P using Tapatalk
-
You use a different email for each. For mine I use the same email with a plus sign to make them look different to the portal, myemail+house1@gmail.com and myemail+house2@gmail.com where myemail is my email name and the house1 and 2 are what I call the 2 locations. Sent from my Nexus 6P using Tapatalk
- 1 reply
-
- 1
-
-
You need to select the KP button inside the scene and make the changes to the light level for the other responder's. Every controller of a scene can be configured differently. Sent from my Pixel C using Tapatalk
-
Create another scene with that kpl button as a responder and have your program change that scene. Sent from my Nexus 6P using Tapatalk
-
Yes, as mentioned in other posts that's currently the only option due to a limitation with Google, hopefully will be resolved soon. Sent from my Nexus 6P using Tapatalk
-
Multiple questions about portals and android apps
Jimbo.Automates replied to ingeborgdot's topic in ISY994
Yes, they can share the portal. Sent from my Nexus 6P using Tapatalk -
I haven't seen that. My responses for all requests are very fast. Sent from my Pixel C using Tapatalk
-
No worries. Ya, I don't know why the faston wo make a difference, and not sure faston even makes sense for an on/off switch. Sent from my Nexus 6P using Tapatalk
-
Thanks Larry, but it's not a dimmer, and I figured out the issue which is right above your post.
-
I figured out my issue. When I wrote the above about it being a on/off and not a dimmer, I started thinking and modified the programs as below, which add faston/fastoff checks. =================================================================================== StCtTest - [ID 01CC][Parent 0043] Folder Conditions for 'StCtTest' If $s.True is 1 Then Allow the programs in this folder to run. ----------------------------------------------------------------------------------- T 1 - [ID 01CD][Parent 01CC] If 'Outside / BackYard / Back Patio' is switched On And 'Outside / BackYard / Back Patio' Status is Off Then $i.Test = 1 Else - No Actions - (To add one, press 'Action') ----------------------------------------------------------------------------------- T 2 - [ID 01CF][Parent 01CC] If ( 'Outside / BackYard / Back Patio' is switched On And 'Outside / BackYard / Back Patio' Status is On ) Or 'Outside / BackYard / Back Patio' is switched Fast On Then $i.Test = 2 Else - No Actions - (To add one, press 'Action') ----------------------------------------------------------------------------------- T 3 - [ID 01D0][Parent 01CC] If 'Outside / BackYard / Back Patio' is switched Off And 'Outside / BackYard / Back Patio' Status is On Then $i.Test = 3 Else - No Actions - (To add one, press 'Action') ----------------------------------------------------------------------------------- T 4 - [ID 01E1][Parent 01CC] If ( 'Outside / BackYard / Back Patio' is switched Off And 'Outside / BackYard / Back Patio' Status is Off ) Or 'Outside / BackYard / Back Patio' is switched Fast Off Then $i.Test = 4 Else - No Actions - (To add one, press 'Action') Now I can never get state 3 to happen, it always goes to 4, which is what I was originally seeing. I know it doesn't make sense to have faston/fastoff for an on/off switch, but they are programs that I copy and modify for all, and this happened to be the first one I tested it on...
-
Just to follow up, I can confirm that this should work. I was re-reading all the comments and was wondering if it wasn't working for me because this switch is an on/off not a dimmer, but I created a simple set of tests and they all work as expected. =================================================================================== StCtTest - [ID 01CC][Parent 0043] Folder Conditions for 'StCtTest' If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Allow the programs in this folder to run. ----------------------------------------------------------------------------------- T 1 - [ID 01CD][Parent 01CC] If 'Outside / BackYard / Back Patio' is switched On And 'Outside / BackYard / Back Patio' Status is Off Then $i.Test = 1 Else - No Actions - (To add one, press 'Action') ----------------------------------------------------------------------------------- T 2 - [ID 01CF][Parent 01CC] If 'Outside / BackYard / Back Patio' is switched On And 'Outside / BackYard / Back Patio' Status is On Then $i.Test = 2 Else - No Actions - (To add one, press 'Action') ----------------------------------------------------------------------------------- T 3 - [ID 01D0][Parent 01CC] If 'Outside / BackYard / Back Patio' is switched Off And 'Outside / BackYard / Back Patio' Status is On Then $i.Test = 3 Else - No Actions - (To add one, press 'Action') ----------------------------------------------------------------------------------- T 4 - [ID 01E1][Parent 01CC] If 'Outside / BackYard / Back Patio' is switched Off And 'Outside / BackYard / Back Patio' Status is Off Then $i.Test = 4 Else - No Actions - (To add one, press 'Action') I ran all of these many times and they all work a expected. So now I need to figure out why they didn't work in my initial setup.
-
You have to unlink and re-link. We are told that it's a Google issue. Hopefully they will resolve soon. In the home app, select Home Control. Select the FAB +, select UDI, and unlink. Sent from my Nexus 6P using Tapatalk
-
Leak Sensors - A (Suggested) Complete Program Package
Jimbo.Automates replied to belias's topic in ISY994
Older leak sensors did return to dry automatically. Newer ones do not, and this thread is about using the newer ones http://forum.universal-devices.com/index.php?/topic/15170-Leak-Sensors---Another-(Suggested)-Complete-Program-Package Sent from my Nexus 6P using Tapatalk -
The answer is Yes, to this question: When it is actually on, and you press off, it should do nothing (run the blank else), so you are saying that it is running true and setting the variable to 2, when it should be nothing? I will do more debugging, but I am glad to hear this is working for you, so there is hope for me Appreciate your assistance. I was hoping Michel would jump in and confirm, and if he doesn't I will ping him directly. Thanks, Jim
-
I am on 5.0.10. I don't have any issue with correctly detecting when off is pressed and the status is off, that works every time. Where it gets messed up is when the status is on and control off is sent, sometimes it works and sometimes it doesn't, actually seemed like most of the time it didn't work, but I didn't count. I will try a different switch tonight and see if the results are any different.
-
Sorry I didn't completely explain, but I checked the status before it inappropriately runs. Sent from my Nexus 6P using Tapatalk
-
In my case it is the same SwitchLinc. Sent from my Nexus 6P using Tapatalk
-
I don't understand what you mean by, This is not correct? But, I double checked, and ISY knows the proper status, so not sure what else to do. Sent from my Nexus 6P using Tapatalk
-
Ya that's probably what I will use unless someone has figured out a better way. Thanks. Sent from my Pixel C using Tapatalk
-
I know how to program the MS, been doing it for many years. That was not the question. The question is about a better way to disable the off program. Sent from my Pixel C using Tapatalk