Michel Kohanim

Hi ELA, Did you add this URL yourself (using the Add button)? With kind regards, Michel

Thank you Illusion. Fixed in the next release. With kind regards, Michel

Hi johnnyt, You are correct: it's too much work. Can you tell me whether or not the ones afflicted with this disease ( ) lose their batteries more quickly? With kind regards, Michel

Hi Guys, ISY does not check the status of motion sensors nor does it communicate with them. I have not seen this myself but there had been numerous reports on a batch a while back. My recommendation: take one of those sensors, remove them from ISY, do a factory reset on them, and then add it back in. Please let me know if you are still having the same issue. With kind regards, Michel

KeviNH, Thanks SO very much. Added a link to our Wiki. With kind regards, Michel

Hello junkycosmos, hart2hart is 100% correct. Just to be able to eliminate variables, please contact our sales (sales@universal-devices.com), and request for a replacement IR sensor. At the least, we can eliminate IR sensor as the issue (copy support@universal-devices.com). With kind regards, Michel

Hello Stephan, Ok, we have now tried on multiple Venstar thermostats and multiple SmartHome thermostats and cannot reproduce this issue at all. Are you sure you followed LeeG's recommendation to remove the thermostat from ISY and then add it back in and retry? With kind regards, Michel

Thanks to both of you. This has been fixed but, unless we find MAJOR bug in 3.3.10, it will not be in our next official release. With kind regards, Michel

Hi Serge, Default userid and password are admin/admin. With kind regards, Michel

Hi Serge, I am so very sorry but Mi LightStyle was OEM to PCS and discontinued for over a year now. If you wish to migrate your unit to 99i/INSTEON, please contact sales@universal-devices.com and it shall be done free of charge. With kind regards, Michel

Hello KeviNH, This is wonderful news. Thank so very much for sharing. With kind regards, Michel

Hi Allen, Please go to Tools | Error Log. I suspect you see IP Conflict issues ... in all likelihood, you have another device with the same IP address. With kind regards, Michel

Hi johnnyt, got it. Thank you! With kind regards, Michel

Mr. Moore, Are you certain that NOTHING changed? Please note that cycle complete uses the following algorithm: Absorption Factor * Water Applied per Irrigation Cycle. So, if absorption factor is less than 100%, then the number might be too small for you to notice. I just made a simple test and it works fine here. With kind regards, Michel

Hi John, My pleasure. That's the first I am hearing about this situation. I do not have Java 1.6 installed on my MAC at all and it works. Are you certain? With kind regards, Michel

Hi LeeG, Thanks so very much for the details. Just performed a simple test and sure enough on level cannot be set. Will do more investigation and keep you posted. With kind regards, Michel

Hi LeeG, Thanks so very much for clarifications as I was a little confused. So: 1. Latching mode 2. If relay is a responder to a scene and the on level for IOLinc relay is set to 0, then: -->On, turns IOLinc Relay Off -->Off, turns IOLinc Relay On Correct? With kind regards, Michel

Mr. Moore, What ISY firmware are you on? With kind regards, Michel

Hi dbook88, On IE, you can do http://userid:password@ISY's_URL ... this only works on IE. With kind regards, Michel

jwilliams, I am so very sorry to hear about all these problems you have been having. Please note that, from your previous posts, I am very much certain that most of the issues you are dealing with are network related. So, if you have not rebooted your ISY yet, can you please just restart the Admin Console and let me know if you still see the progress report at 58%? And, just to save you time in the future, please do NOT use crawl function because in all likelihood there are multiple half links/orphaned links in each devices and thus you are going to have many unexplained events relating to those devices. With kind regards, Michel

Thank you all for your wonderful and heartwarming support and posts. i814u2, I am so very sorry. The problem is that 994i Z firmware cannot be applied to 3.2.6 (it didn't exist when 3.2.6 was released). So, please do be kind enough to use 994i firmware. And, if you are using INSTEON/PLM, you do NOT have to change to 994i Z firmware. The only difference between the two is that in 994i Z does not go to Safe Mode if PLM is not installed. With kind regards, Michel

Hi bsobel, It's really not about the radio but incompatibility between stacks. For instance, SEP requires ECC and authentication. HA requires a specific link key for discovery and there are a lot of limitations as far as what you can do with the nodes. PRO is devoid of anything and just uses Zigbee for communications. It's a major effort to support multiple profiles mostly because PRO devices (such as Brultech/RCS) use Digi radios which have a completely different end point, profile, and cluster ids. So, to answer your question: theoretically possible but practically requires a major kludge of a solution and, in all likelihood, not a clean/reliable one. With kind regards, Michel

LeeG, thanks as always. Hello johnnyt, Yes, of course you may. The main difficulty is that, above and beyond what you have reported, Trigger Reverse causes major issues with ISY simply because IOLinc decides to return the opposite state when queried. Quite a mess. With kind regards, Michel

Hello djones1415, If you are on 1.7.11 (you can verify by going to Java Properties in Control Panel), then you are OK Sometimes, you might have to reboot computer for some of these settings to take effect No. This said, I recommend not using a browser at all: viewtopic.php?f=44&t=10409&p=79281#p79281 Although the risk is very low, here's the high level view: all ISYs come out of factory with the same security certificate. So: 1. IF you are accessing your ISY remotely AND 2. IF you have the default certificate AND 3. IF someone manages to crack ISY's default certificate AND 4. IF they know your IP address/port --> Then they can sniff/decrypt the traffic between you and your ISY and figure out your password. The best thing to do would be to install a Self-Signed Certificate. The instructions are pretty simple and, in case you have any problems, please contact us and we'll help you. With kind regards, Michel

Hi bsobel, A sigh ... in Zigbee world life is not so simple. We are working on an HA stack but the main problem is that if we use HA, then we cannot do regular PRO stuff because they are not compatible. With kind regards, Michel