Michel Kohanim

Hi kentinada, I very much doubt your settings are being saved. Please make sure that local settings is set to blank and remains blank. With kind regards, Michel

Hi intellihome, Yes, as long as you REBOOT ISY with a different PLM, you can do PLM restore. This said, please MAKE SURE you restore the backup first and then restore devices before attempting anything else. With kind regards, Michel

MFBra, You can also use Control 'is not Responding' on a few of your most important devices in a program. With kind regards, Michel

Hi Kentinada, Please send the screenshot of your MobiLinc Configuration settings to support@universal-devices.com. With kind regards, Michel

Hi intellihome, Hopefully you have a good backup from before the PLM replacement. If you do, then you can definitely recover by Restoring Devices: http://wiki.universal-devices.com/index.php?title=ISY-99i/ISY-26_INSTEON:File_Menu#Restore_Devices With kind regards, Michel

Hi junior, sdynak is 100% correct. I suspect that either File | Delete Modem was issued OR you restored a dead PLM. Hopefully you have a very good backup from before all of this. And, if you do, you can definitely recover by: http://wiki.universal-devices.com/index.php?title=ISY-99i/ISY-26_INSTEON:File_Menu#Restore_Devices With kind regards, Michel

Hi Kentinada, You can use MobiLinc through ISY Portal: http://wiki.universal-devices.com/index.php?title=ISY_Portal_MobiLinc_Configuration With kind regards, Michel

Hello everyone, Unfortunately, we just received another HW rev of the Motion Sensor (which replaces the older version) and, regrettably, it does not work with neither firmware version of ISY. Looking into it now. With kind regards, Michel

Hi JCDinPGH, Please also checkout: http://wiki.universal-devices.com/index.php?title=ISY_Portal_Geo_Fencing With kind regards, Michel

Thanks Teken. Hi Pster, by default AutoDR is off. You can get more information from http://openadr.org. With kind regards, Michel

Hello all, This motion sensor reports as the old one in both 4.x and 5.x branches. So, have tested the motion ... dusk/dawn and low bat have not yet been tested. With kind regards, Michel

Hi leonpc, I very much doubt you can add support for GarageHawk in the Hub. With regards to ISY, unless you make a node server in 5.x, it would be impossible in 4.x. With kind regards, Michel

Hi jday, It's always best to use the app (not applet): http://wiki.universal-devices.com/index.php?title=Main_Page#Admin_Console_Icon_on_Your_Desktop With kind regards, Michel

Hello sdcrane, Thanks for the feedback. Unfortunately it's not as trivial as you suggest since ISY Portal will have to start collecting temperature units from thermostats (which sometimes is not possible). In Celsius, you do have digits after the decimal. With kind regards, Michel

Hi SeeGreen, Here you go: http://wiki.universal-devices.com/index.php?title=Main_Page#Email_.26_Networking_Substitution_Variables With kind regards, Michel

Hi Teken, Network module is one way: from ISY to something (not the other way around). ISY has APIs (REST/Web Services) that are available out of the box and which do NOT depend on the Network Module. With kind regards, Michel

Hi MNTheatreGuy, My pleasure. This said, why did rebooting the routet reboot ISY? With kind regards, Michel

Hi MNTheatreGuy, If you have any port forwarding rules in the router that points to ISY, remove them. If you see File | Disable Internet Access visible, click on it. If all else fails, please reboot your router. With kind regards, Michel

Hi MNTheatreGuy, Most of these issues are related to having a static IP configuration for ISY. You can also review the instructions here: http://wiki.universal-devices.com/index.php?title=Main_Page#DNS_Error With kind regards, Michel

Hi MstrD, Unfortunately we have not seen any APIs that allow these type of granular control of Alexa itself. With kind regards, Michel

Hello everyone, All systems are healthy ... the issue might be DNS related. Please check your error log. With kind regards, Michel

Hi diggler, If you are still having these issues, please do not hesitate to contact our tech support. We'd be delighted to help you. With kind regards, Michel

Hi diggler, What do you mean by "locking up my machine"? Could it be related to any of the following? http://wiki.universal-devices.com/index.php?title=Main_Page#Admin_Console_Hangs http://wiki.universal-devices.com/index.php?title=Main_Page#Admin_Console_Minimized.2FInvisible_and_Cannot_be_Restored With kind regards, Michel

Hi Michael, As are we! With kind regards, Michel

Hi Michael, Thanks so very much (as always)! With kind regards, Michel