Techman

@glsmith777 The current eisy firmware version is 5.7.0. You should update your firmware and then clear your java cache, including checking the box "installed applications" and then download the current version of the IoX Launcher: https://isy.universal-devices.com/start.jnlp

All of my many Insteon keypads having the following options. Backlight and led brightness are one of the same. My eisy firmware is 5.7.0. You can set the led level from either the "led brightness" or the "backlight". I'm not sure why both options are displayed. Once you set the led levels, the "backlight" will revert to 0/0 the next time you open the admin console, however the "led brightness" will correctly display the levels. It's probably a bug that needs to be tweaked in a future firmware release.

Backlight sets the on and off brightness levels of the leds in the KPL The default of 0/0 is not an accurate representation of the actual levels that may be set. The on and off level settings can vary from KPL to KPL depending on their firmware versions. It's one of those situations where you have to play with the level settings to find a setting that works for you.

@barrygordon I have several of the Multisensor 6 linked to the eisy using the Zmatter dongle and they all work as expected. Try doing an exclude then include. It can sometimes take a little longer for the Zwave include process to complete, so have patience. Is your MS6 battery powered or a/c?

@barrygordon Are using the Zmatter dongle with your Eisy. If so, it works well the Multisensor 6. Being that the Zmatter interfaces with the eisy via USB, you can remotely place the Zmatter dongle for best RF coverage.

The Query all program didn't migrate over. You can just create a new one.

Try running update packages again. You can also try removing power then rebooting.

You'll have to manually enable your programs. There was a bug fix released that should have corrected the "disable programs" issue. You may want to run Upgrade Packages again, however that won't enable the programs that were previously disabled.

Run your Query all program.

Are you using the IoX Launcher to access your controller.

@Kentinada Did you have a good and current backup prior to putting the repaired PLM back on line? You might try doing a factory reset on the PLM, then a restore PLM Is the PLM address the same as it was before the repair, if so then the factory reset / restore PLM should be all that you need to do.

@Chris Jahn @RRalston Chris, The OP mentioned that after "update with interview", the device was removed from programs, should that be the case?

When you open the IoX Launcher, the PG3 option should be listed under the Admin options Once you log into PG3x you will see the drop down menu for the Node store

The options I gave you came from UD. I would have thought the update with interview would not have had an effect on your programs. I think it's best to submit a ticket as it's possible that OTA may need a tweak. Are you on a Polisy or EISY, What is your firmware and UI version?

@arosacope What is your eisy firmware and UI version?

A battery operated device must be awake for it to receive a Firmware update. To verify the device has been updated you need to first either uninstall and reinstall the device, or right click on the device and click on Zwave | Synchronize | Update with Interview. Then verify the firmware version using Xray | DH Command Class Let me know if the update was successful. An update can take up to 10 minutes.

Your ISY firmware and UI is outdated. The latest version, assuming that you don't have Zwave 300 installed is here: 5.3.4 (ISY994) - Last release for ISY994 - Current Release Announcements - Universal Devices Forum (universal-devices.com) This firmware release contains bug fixes and improvements. Be sure to read the release notes before updating.

I would assume so as most zwave devices are backwards compatible. The 800 series devices are not widely available.

Correct, IF Keypad is switched ON or Switchlinc is switched ON THEN Program run then (program name)

The 800 series requires a different chipset so Zmatter won't directly support it. The eisy / polisy probably can't support two controllers at the same time.

IF Status Swirtchlinc is ON THEN Program run then (program name) ELSE

When you cleared your java cache did you check the box "installed applications"? Which will remove the IoX Launcher from your desktop.

@kartman_canada Make sure your laptop is on the same network as your eisy, i.e. not the guest network. Best to clear your java cache and download the IoX Launcher after the upgrade not before.

To confirm the device's current z-wave firmware version information: Right click on the device | X-Ray | DH Command Classes, click on go and look for the Version command class (134) and you will see something similar: data.applicationMajor = 1 (0x00000001) data.applicationMinor = 10 (0x0000000a) In this case it equates to version 1.10

Yes, it's OK to now update to 5.7.0 on the eisy.