mmb

@larryllix do you see any lag on the SiLab controller when used to turn on/off switches? I've tested Polisy with a Leviton and Zlink plugin switches paired with a Zooz dongle so far and lag is about 2 to 3 sec. The switches are in the same room and there are no hops. I'm comparing to an Insteon PLM/switch which is pretty much instantaneous. I'm wondering if this is just a z-wave thing I have to live with? Thanks.

Update: I tested on my ISY994 with a Z-Wave module and behaviour is identical to the Policy.

Are you using wifi? My Launcher works when on Ethernet but when I switch to WiFi the Launcher goes blank but I can SSH and use the Polisy webapp. I also manually typed the information as well but get Not Found. It must be the latest update because it was working before.

@Michel Kohanim I have a ZLINK Plug-in Dimmer ZL-PD-100 that doesn't update the Ploisy controller at all on a manual button press. My Leviton plugin module is working fine in both directions (although a little laggy). I contacted the reseller and his testing indicated it was updating but on another type of controller. The module works fine when controlling from the Polisy to the module. He suggested I contact UDI for support. Is there further refinement to z-wave that may get this thing running or should I return it?

@brians let me know how the ZL-PD-100 dimmer tests for you. I still don't receive controller status updates on a manual button press. Unlike the Leviton which updates properly. Both have a still lag of about 3 seconds.

Really @tazman? Not for me, I tried a manual update and nope. Update: Cleared the cache once again and it worked. All good, but not sure about the button.

@Techman I had the same error when I selected LAN in the Launcher. I'm not sure if you have a Cloud option but the Launcher worked fine with that option.

@Michel Kohanim just a data point I had the same mismatch error when selecting LAN in the Launcher. However, selecting Cloud in the Launcher and the Admin console launches properly.

@mjrush @lilyoyo1I had a Zooz 4-in-1 multisensor which was really nice but I couldn't make it stay on Celsius, it would keep flipping back the F - so I returned it. The reseller blamed the controller. Anyway, it had a motion sensor and it seemed to work flawlessly on Polisy. I had it trigger a scene to turn Insteon and Z-Wave plugin modules. Status was updating properly. It's interesting how some devices don't seem to work completely with Polisy. Maybe future code updates will address. And I'll try a Aeotec multisensor sometime in the future.

Thanks @brians, is the monitoring program look for Hail or something? I'll try it out if you have details. Yes an updated Polisy can use a Zooz USB Z-Wave dongle but I understand another dongle works as well but forgot the name. I use it in conjunction with a USB Insteon PLM. I understand the serial PLM will work too.

@RB3 I have a ISY994 Z-Wave module that I've never installed. What is confusing is not understanding what I see in Polisy with Z-Wave as being normal or not. Based on comments, maybe I should install the module so I can compare behavior.

@brians yes ISY with Z-Wave on Polisy. It works fine but a few annoying glitches still to be ironed out. I gather you are using an ISY994 for Z-Wave, so maybe the Polisy delays I'm seeing are issues in the beta code. A manual press of the Leviton module gives this: Thu 12/30/2021 09:24:38 AM : [ZWAVE-RX ] [010B00A800011602820100B278] REQ APPLICATION_COMMAND_HANDLER_BRIDGE Thu 12/30/2021 09:24:48 AM : [ Time] 09:24:48 2(0) But the Polisy doesn't do anything with it. The Zlink module doesn't seem to send anything - the Seller is checking for firmware updates because he says another module/controller he has is sending commands. 'What's involved in a Hail Program?

Here you go. Event Viewer Log Level 3 for Turning Off then On a scene with both an Insteon and Z-Wave Dimmer Plug-in Modules. Network connectivity to Polisy is over Wifi. Fri 12/24/2021 10:56:08 AM : [INST-TX-I1 ] 02 62 00 00 12 CF 13 00 Fri 12/24/2021 10:56:08 AM : [ZWAVE-TX ZW021_1] [26/01] Dimmer Switch Set val=0x00 rr=0xFF ACK,AUTO,EXPLORE To=0x15 Fri 12/24/2021 10:56:08 AM : [INST-ACK ] 02 62 00.00.12 CF 13 00 06 LTOFFRR(00) Fri 12/24/2021 10:56:08 AM : [D2D EVENT ] Event [26 A6 36 1] [ST] [0] uom=100 prec=0 Fri 12/24/2021 10:56:08 AM : [ 26 A6 36 1] ST 0 (uom=100 prec=0) Fri 12/24/2021 10:56:08 AM : [D2D EVENT ] Event [24 D3 42 1] [ST] [0] uom=100 prec=0 Fri 12/24/2021 10:56:08 AM : [ 24 D3 42 1] ST 0 (uom=100 prec=0) Fri 12/24/2021 10:56:11 AM : [ZWAVE-TX ZW021_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x15 Fri 12/24/2021 10:56:11 AM : [ZWAVE-RX ] [010E00A800011505260300000000B1DC] REQ APPLICATION_COMMAND_HANDLER_BRIDGE Fri 12/24/2021 10:56:11 AM : [D2D EVENT ] Event [ZW021_1] [ST] [0] uom=51 prec=0 Fri 12/24/2021 10:56:11 AM : [ ZW021_1] ST 0 (uom=51 prec=0) Fri 12/24/2021 10:56:15 AM : [INST-TX-I1 ] 02 62 00 00 12 CF 11 00 Fri 12/24/2021 10:56:15 AM : [ZWAVE-TX ZW021_1] [26/01] Dimmer Switch Set val=0xFF rr=0xFF ACK,AUTO,EXPLORE To=0x15 Fri 12/24/2021 10:56:15 AM : [INST-ACK ] 02 62 00.00.12 CF 11 00 06 LTONRR (00) Fri 12/24/2021 10:56:15 AM : [D2D EVENT ] Event [26 A6 36 1] [ST] [255] uom=100 prec=0 Fri 12/24/2021 10:56:15 AM : [ 26 A6 36 1] ST 255 (uom=100 prec=0) Fri 12/24/2021 10:56:15 AM : [D2D EVENT ] Event [24 D3 42 1] [ST] [255] uom=100 prec=0 Fri 12/24/2021 10:56:15 AM : [ 24 D3 42 1] ST 255 (uom=100 prec=0) Fri 12/24/2021 10:56:18 AM : [ZWAVE-TX ZW021_1] [26/02] Dimmer Switch Get ACK,AUTO,EXPLORE To=0x15 Fri 12/24/2021 10:56:18 AM : [ZWAVE-RX ] [010E00A800011505260311110000AFC2] REQ APPLICATION_COMMAND_HANDLER_BRIDGE Fri 12/24/2021 10:56:18 AM : [D2D EVENT ] Event [ZW021_1] [ST] [17] uom=51 prec=0 Fri 12/24/2021 10:56:18 AM : [ ZW021_1] ST 17 (uom=51 prec=0) Fri 12/24/2021 10:56:32 AM : [ Time] 10:56:33 1(0) Update 1: I contacted the reseller about another issue with this switch. When I press the on/off button on the module I don't see any updates in the controller. Nothing in the event viewer either. The reseller tested for me on his Vera system and he says the controller updates properly. Update 2: I received my Leviton DZPD3-2BW Z-Wave plugin dimmer and a quick test shows a slight lag of about 1 sec on a on/off from from the Polisy controller. A manual on/off updates the controller properly. So something is wrong with the Zlink.

I'm testing a z-wave plug-in dimmer with Polisy using the Zooz dongle and I'm seeing a 2 or 3 second delay when turning on/off compared to a similar Insteon plug-in dimmer. The dimmer is working perfectly aside from the slight slowness. It is a ZLINK Plug-in Dimmer ZL-PD-100 and sits about 15 ft from the Polisy. Is slowness an inherent characteristic of z-wave? There is lots of online discussion about slowness and it can be attributed to just about everything under the sun. I can live with it, just curious.

That's good. I just noticed my gateway isn't displayed in the Polisy console, so maybe there's some small display issues to iron out. It is set though... $ netstat -rn Routing tables Internet: Destination Gateway Flags Netif Expire default 192.168.0.1 UGS wlan0 127.0.0.1 link#4 UH lo0 192.168.0.0/24 link#7 U wlan0 192.168.0.109 link#7 UHS lo0 And DNS is fine. $ grep "nameserver" /etc/resolv.conf nameserver 1.1.1.1 nameserver 9.9.9.9 nameserver 8.8.8.8

Is the dhcp client running? service dhclient status wlan0 I suppose if you can't get into Polisy to check that would be a problem.

Did you try the power down unplug ethernet reboot?

That was exactly my experience and the DNS fields were blank. I'm wondering if the Ethernet disconnect screws Polisy up? According to the promo info: Native support for 3G/4G modems gives you the ability to go off the grid. Literally! And, if you are one of those maximum-connectivity types, get the Polisy PRO model which comes standard with Dual Band WiFi and Bluetooth (4.0). Anyway, my last try I did this: sudo shutdown -h now, unplug power and Ethernet, then power up. I see this now. And from my Unifi

Interesting, as noted I see six SSIDs with the same name (2.4/5) for my three access points. My Unifi system manages connectivity steering but with Polisy I had to select a random SSID from the list. Currently Polisy is associated with 2.4 and it's operating properly.

Hi Michel, I ended up moving the Polisy out of the server closet and into a new temporary space and the wifi associated properly and very quickly. This is the same server closet that was giving the ISY994 X10 grief. Anyway it is auto-populating the launcher properly. I still see multiple SSIDs but that a minor inconvenience.

I may try that. As mentioned, after selecting a random Mabel SSID it finally does acquire an IP but very slowly. The launcher doesn't respond properly as there's no drop down to run the ISY console.

That response was not helpful at all and it was more of a rant. Interesting that you got it running on a vm though.

Thanks I learned a long time ago to keep dhcp separate, so it's on a Windows Server 2016.

The ssid and password are there, thanks. I did a reboot but wifi but Polisy won't connect. Although it will eventually over several hours.

Maybe my Polisy is special? There's definitely the hardware for wifi and magically it grabbed an IP started working. But you're right, I can't connect to the ISY, just Polyglot.