lilyoyo1

Zwave devices as controllers are complicated as not all devices can be added as a controller. Unfortunately this is mfg. dependant and different models (even from the same mfg.) can have different capabilities. Either way, what you're trying to do is not possible on 4.9. You'll need to upgrade your zwave board to at least the 500 series and upgrade your isy to 5.3.4 to even have the chance for it to be possible with your particular devices.

There are alot of bug fixes in Polisy that needs to be done so its something that you should do anyway. Im not home myself to look at the prices nor would I take the time for something that can just as easily be done by yourself. Someone else may chime in with the exact prices for you however. In general- Most node servers are from Free to 75 bucks or so. The more popular ones such as Ecobee, Harmony, Sonos can cost towards the higher side.

Dont you already have a polisy? Its just as simple for you to log into pg3 using the link that Geddy provided and seeing what those and any others you may potentially want costs.

Everything is a different price. You access the store via PG3 interface. Current supported nodes are found on the forum under PG3

Your address is either typed incorrectly or its not in linking mode during the pairing process. Also, make sure that your UI matches your firmware

I hope so too. The quality of them are much much better than current insteon devices.

Ive never seen that either though its been years since ive used a Schlage lock. I didnt find anything online either. If I had to hazard a guess, I would say there is corruption in its memory/programming somehow. Schlage CS would probably be your best bet

I would unplug your Polisy before unplugging either USB device from polisy. Since the PLM and zwave dongle needs to be connected at bootup in order to be recognized, I'd reboot/power cycle

yes

10% isnt much of a change. For example, if the sunlight coming into your house is 110 lux- is it really dark enough to warrant turning on the lights at 99lux. With such a small window, you'll be cycling the lights off and on constantly. When it comes to luminosity, I prefer something that provides more accuracy such as the aeotec tri-sensor. Because I can use actual values in my programs, I can set the lights to turn on when the light drops below a certain threshold and off should it go above a certain threshold (if on).

I hope im wrong but Im seeing the same paths taken as before. The fact that they were willing to sell the Nokia hubs to you lets me know that the Nokia line came with the sale. Them pushing the same old line vs moving forward with something new seems like they're still stuck on the past vs trying to move forward to the future. Its telling that they wanted to sell you the hubs vs the chips themselves to make your own. That lets me know, they have no interest in that line and does not want to build a partnership with anyone to expand insteon's availability. They simply saw a quick way to get rid of the product while making some of their money back. As much as a supporter as I was of insteon, I just dont see them being a viable player long term in this market. Especially with them following in the same footsteps from the past 2 ownerships.

What causes the music to play? Is it the on/off module being on or the network resource itself? What I would do is remove the network resource line from the program and manually turn on the module to see what happens. Since you didnt post your programs or give any details about your system, we are limited in assistance. I suspect your program is using the status of the module being on (which is why 2 different modules are causing the same issue). By using status, the NR would run anytime the module was on regardless of how it was turned on. Typically, the isy does not see commands originating outside of it so the status of your module would not update. This tells me that there is something within your programming causing the issue (could be an old program or device is part of another scene). Does the kpl turn on as well when it happens? The more information you provide us the better we can assist you in figuring out your issue

Did you set the parameters for the sensor as outlined in the owners manual? Once you do that and it's reporting properly, you can write programs to accomplish whatever you're trying to do.

I agree. But thats why UDI has moved away from insteon. They want more control over the system and the devices that connects with it. Hopefully both will circle back around and insteon will license them to make their own PLM. If not- it comes down to them doing the same things all over again and I'd stay away.

They do. Michel corrected himself and said PLM pro. Its the one that showed up on the FCC database a few years back

Sounds good to me. Thank you

@simplextech I hope all is well. Is it possible to add Night mode to the Sonos Node server

Follow the factory reset instructions from the wiki. https://wiki.universal-devices.com/index.php?title=Resetting_Your_ISY

I think the problem is that it skews so far towards a programming tool that it leaves so much to be desired from a simplicity standpoint which is a turnoff for those who desire a decent looking interface to simply control their devices. I downloaded the app when it was first in beta and was put off by the design that i deleted the app. It's not my intention to offend anyone but it looks like a programmer designed it for programming not for usability. It's extremely utilitarian. Here are screen shots comparing one designed for use and UD Mobile (from Google store):

I agree 100% with this.

This post was moved from the original post which is why it's not showing up. I can't remember the original post that it was on.

So sensitive. It's simple. Instead of being selfish, start a new post instead of hijacking someone else's so that others can easily find your solution. We appreciate you posting the solution to your problem for others who may be in a similar situation. Had it stayed in your hijacked post, it probably wouldn't have been found.

You don't have to try and be smart about it. After all- You are the one coming here for help. One of the many complaints about the forum is how hard it is to find information which results in unnecessary duplicate posts. We all are just trying hard to make this a better experience for everyone- especially new members who are not aware of the best ways of finding information.

He said he may. The news was that he was able to get a meeting with insteon on the olm issue. No updates yet

This has nothing to do with the original post. Please do not hijack a thread like this as this screws up the search results. This really needs to be it's own post. Thank you @Geddy