tmorse305

Upgrading to 4.2.30 solved the problem. Thank you very much for your help!

Here is the log file for a motion off then motion on: Sat 09/12/2015 09:47:35 PM : [iNST-SRX ] 02 50 37.A4.56 00.00.01 CF 13 01 LTOFFRR(01) Sat 09/12/2015 09:47:35 PM : [std-Group ] 37.A4.56-->Group=1, Max Hops=3, Hops Left=3 Sat 09/12/2015 09:47:35 PM : [ 37 A4 56 1] DOF 1 Sat 09/12/2015 09:47:35 PM : [ 37 A4 56 1] ST 0 Sat 09/12/2015 09:47:36 PM : [iNST-SRX ] 02 50 37.A4.56 00.00.01 CF 13 01 LTOFFRR(01) Sat 09/12/2015 09:47:36 PM : [std-Group ] 37.A4.56-->Group=1, Max Hops=3, Hops Left=3 Sat 09/12/2015 09:47:36 PM : [iNST-DUP ] Previous message ignored. Sat 09/12/2015 09:47:36 PM : [iNST-SRX ] 02 50 37.A4.56 13.00.01 CF 06 00 (00) Sat 09/12/2015 09:47:36 PM : [std-Group ] 37.A4.56-->13.00.01, Max Hops=3, Hops Left=3 Sat 09/12/2015 09:47:36 PM : [iNST-INFO ] Previous message ignored. Sat 09/12/2015 09:47:36 PM : [iNST-SRX ] 02 50 37.A4.56 13.00.01 CF 06 00 (00) Sat 09/12/2015 09:47:36 PM : [std-Group ] 37.A4.56-->13.00.01, Max Hops=3, Hops Left=3 Sat 09/12/2015 09:47:36 PM : [iNST-INFO ] Previous message ignored. Sat 09/12/2015 09:48:50 PM : [iNST-SRX ] 02 50 37.A4.56 00.00.01 CF 11 01 LTONRR (01) Sat 09/12/2015 09:48:50 PM : [std-Group ] 37.A4.56-->Group=1, Max Hops=3, Hops Left=3 Sat 09/12/2015 09:48:50 PM : [ 37 A4 56 1] DON 1 Sat 09/12/2015 09:48:50 PM : [ 37 A4 56 1] ST 255 Sat 09/12/2015 09:48:50 PM : [iNST-SRX ] 02 50 37.A4.56 00.00.01 CF 11 01 LTONRR (01) Sat 09/12/2015 09:48:50 PM : [std-Group ] 37.A4.56-->Group=1, Max Hops=3, Hops Left=3 Sat 09/12/2015 09:48:50 PM : [iNST-DUP ] Previous message ignored. Sat 09/12/2015 09:48:50 PM : [iNST-SRX ] 02 50 37.A4.56 11.00.01 CF 06 00 (00) Sat 09/12/2015 09:48:50 PM : [std-Group ] 37.A4.56-->11.00.01, Max Hops=3, Hops Left=3 Sat 09/12/2015 09:48:50 PM : [iNST-INFO ] Previous message ignored. Sat 09/12/2015 09:48:51 PM : [iNST-SRX ] 02 50 37.A4.56 11.00.01 CF 06 00 (00) Sat 09/12/2015 09:48:51 PM : [std-Group ] 37.A4.56-->11.00.01, Max Hops=3, Hops Left=3 Sat 09/12/2015 09:48:51 PM : [iNST-INFO ] Previous message ignored.

The MS was in linking mode prior to the write attempt. Here are the screen shots you requested.

Jumper #5 is set for software control. Here is the Event Viewer dump: Sat 09/12/2015 08:33:02 PM : [All ] Writing 0 bytes to devices This single entry occurred after I tried to update an option

The only dual band device currently connected to the ISY is the PLM itself. The MS is about 6ft away from the PLM. Since I can read the motion, dawn/dusk and battery status I figure i was close enough. The HouseLinc is also connect via a USB PLM. I have many dual band devices in my house but I haven't linked any of them to the ISY yet. I was starting small just to get the feel of the ISY.

I just purchased an ISY994i IR PRO to replace a Cortexa (and some HouseLinc) automation controller. So I'm new to ISY but not home automation. I have a new motion sensor that I bought and have linked it to the ISY, it's the only device linked. I factory reset the sensor prior to linking and it is working correctly reporting both motion, dawn/dusk and battery(off) to the ISY. The problem comes when I try to modify the option settings. I set the led flashing on the MS then click the options button and I get an error message "Request Failed". Once the Option screen is open I click the query button but get the same error message. I linked it to my Houselinc software just to make sure the MS is working. From the Houselinc I was able to set to the options. So I think the MS is OK. Any suggestions? Thank you.