Michel Kohanim

Hi Wayne, thanks so very much for the update. With kind regards, Michel

Hi smokegrub, Quick questions: 1. Do you still have the hub on the network? 2. Did you register your devices using the first option (remove existing links)? 3. What does false status mean? Is it after a query or spontaneous? If you are still having problems, it would be best to schedule a call/remote session with our technical support. With kind regards, Michel

Hi smokegrub, I am so very sorry. Two choices: 1. Upgrade to 4.1.2 (viewtopic.php?f=25&t=13338) OR 2. Use http://isy.universal-devices.com/994i/4.1.2/admin.jnlp With kind regards, Michel

Hi garybixler, Thanks so very much. This should be available in our 5.0 release as we add bidirectional communications to the network module. With kind regards, Michel

Hi WayneW, Is it possible that your 994 and 99 (or some other device on your network) have the same IP address (and thus an IP Conflict)? With kind regards, Michel

Hi Gary, There should be .. the only problem has always been that the network module is NOT bi-directional and thus the value of the ping is lost. Are you looking for only a ping (one way) or did you want to do anything with the results? With kind regards, Michel

Hello ahwman, You can purchase the module by going to Help | Purchase Modules. With kind regards, Michel

Hi swbrains, I am so very sorry. Two choices: 1. Upgrade to 4.1.2 (viewtopic.php?f=25&t=13338) OR 2. Use http://isy.universal-devices.com/994i/4.1.2/admin.jnlp With kind regards, Michel

Hi GQuack, The icons right above Fast On/Fast Off buttons are for on/off. With kind regards, Michel

Hello everyone, I am so very sorry. You have two choices: 1. Upgrade to 4.1.2 (viewtopic.php?f=25&t=13338) OR 2. Use http://isy.universal-devices.com/994i/4.1.2/admin.jnlp ß do this first With kind regards, Michel

Thank you both for your input. madcodger, we are not "anti-cloud", if we were, there would not exist MobiLinc Connect and MobiLic Energy Management Portal (and a few other OEM solutions). What we are is cloud-independent. I am sure you understand the difference so I am not going to bore you more. apostolakisl, yes, precisely! With kind regards, Michel

Hi GQuack, Fast On only makes sense if you have a dimmer but you do not wish to use any preset level. If you have a switch/relay, Fast on would not make any sense since everything is basically a fast on. With kind regards, Michel

Hi ferdies, thanks SO very much for the feedback. I bet you that you do not even need EncodeURL because there's absolutely nothing in (/control) that can be encoded. With kind regards, Michel

apostolakisl, to your point, we got a DOE grant for rooftop diagnostics. We used the same ISY framework and there's an algorithm running there that's pretty complex taking baselines for 3 weeks, applying multiple transformations to arrive at few diagnostics points such as: the filter needs changing or the fan is not running at optimum speed, or the unit is overheating or over-cooling. Pretty sophisticated stuff. In short, automation is what ISY has been designed for and can be utilized in any type of application that has events, actions, and analysis. GuitarBuilder, thanks so very much! With kind regards, Michel

Hi Dick, Yes, you are on the last official release for 99 (3.3.10) and your UI is the last beta UI build for ISY. With kind regards, Michel

Hello everyone, As you are all aware, one of the cornerstones of ISY is "autonomy". Actually, we coined ISY's design philosophy AAA: A- Autonomy A- Agnostic A- Automation That's why we were not very keen in developing APIs that go to the cloud. i.e. if hackers can steal 100 million credit card numbers from Target, it's not really far fetched to think that they could also hack into Nest's servers or any other cloud based system for that matter. It's pretty easy to change one's credit cards but I suspect it's not very easy to change one's residence. I must say that we were pretty bemused by the acquisition NOT because NEST is bad (I think it's an excellent little gadget) or that it's not worth $3.2B, but because it's totally the opposite of what we envision a home controller/brain should be. As such, we will continue with our current approach of Autonomy and Independence!!! With kind regards, Michel

Hi Chuck, No, the same URL should work regardless. Can you please let me know what you are getting? If you are on MAC, admin.jnlp goes into the download folder and you have to explicitly double click it. With kind regards, Michel

Hi Big517, Thank you and those are already included in 5.0. With kind regards, Michel

Hi Chuck, Sincere apologies. Please use #2. With kind regards, Michel

Hi guys, I am so very sorry. Two choices: 1. Upgrade to 4.1.2 (viewtopic.php?f=25&t=13338) OR 2. Use http://isy.universal-devices.com/994i/4.1.2/admin.jnlp With kind regards, Michel

Thank you ferdies. I played with it and sent you an email with my results. It seems that all the GETs work and none of the POSTs work even though you get a success status. With kind regards, Michel

Hi Big517, On some of them you cannot simply because it requires an explicit query from ISY to get the status change. On others that report their status, we are working on a solution to provide you with Control (just like the Door Locks). With kind regards, Michel

Hello all, I strongly recommend upgrading to 4.1.2: index.php With kind regards, Michel

Hi shannong, First of all, I am by no means an expert so my suggestions are based mostly based on my experiences and subjective. 1. I do not think you need any Access Points simply because the RemoteLincs work in every location of the house. This is especially true IF you take the RL and go as close to the PLM as possible and see if it still covers all your devices spread out through your house (of course controlled by RL). The exception is #2 2. I have seen best performance when phases are bridged (either by Access Points or dual band devices) very close to the breaker panel and close to each other. This way, phases are bridged with on RF hop to one another 3. Unless you have only a handful of devices in a very large house, most communication issues are noise related and not signal strength related 4. In a lot of cases, the location of the PLM is instrumental. If you have it plugged into the same outlet as all other electronic equipment, rest assured that you are going to have some type of noise and communication problems 5. Transformers AND "electronic" low voltage lights (not the magnetic ones) are pretty much the biggest source of noise 6. Baby monitors, older INSTEON thermostats, SwitchLinc v35s can definitely cause problems With kind regards, Michel

Hi mfranzel, Welcome! If Status 'KPL NightTime' is not off Then It's best to actually review: http://wiki.universal-devices.com/index ... e#Programs With kind regards, Michel