garybixler

I just did the latest eisy updates and tried migrating one NS over from Pg3. The NS AVRemote migrated but doesn't seem to accept commands in programing. I am trying to enter commands to tivo NS but just get this screen that doesn't accept and commands. When trying to enter a command it just dims.

Hi Tim, I am using the Webcontrol8. I had to get the DS1822 sensor from China as it appears they are not made anymore and I wasn't sure what sensor could take its place. So I will be trying the Hilitchi sensors as recommended by Eric. Hopefully they will work fine. Thanks for a great NS. Gary

Thanks Eric, the DS1822 seems hard to get anyway. I think I will give the Hilitchi 3m/9.8ft Waterproof Temperature Sensors Digital Temp Probe (Pack of 5pcs) a try. Thanks

Hi, I just installed the DS1822 temp sensor and its reading about 6 degrees higher that it should. I see there is no way to calibrate it on the Webcontrol8 web page. Is it possible to calibrate? Thanks for any suggestions. Gary

Yes, I don't see the last entry to play in the eisy-ui audio player node play list. It is however seen if I would create a new program in the eisy-ui. Rebooting the eisy would probably fix the issue but that is my very last choice. Not really a problem, just an observation.

Mostly informational, but I added a new audio tts, restarted the audio player node server but it is not seen in eisy. Can however be seen in the admin console. Restarted eisy but still not seen. IoX 6.1.2_7 It can be seen when creating a program but not under nodes.

@TJF1960 Initially I thought what was in the parenthesis was to show what need to be configured. I had tried the parenthesis earlier but I didn't have the space between ": " . Thanks for pointing that out.

@TJF1960 Good news. It appears that this variation worked. {"aip1": "Light Level"} Looks like parentheses were needed.

@TJF1960 Thanks for the reply. I just tried variations of "aip1": "light Level" but still cant get it to add a node. "Aip1": "Light Level" "aip1": "Light Level" "Aip1" : "Light Level" "aip1" : "Light Level" "AIP1": "Light Level"

Hi, I just received the WebControl 8 today and am trying to add an analog node but can't seem to create the node. I included a screen shot of my configuration. Would apricate any suggestions. Thanks. Log included. New Text Document (2).txt

If you right click on the program options should pop up including disable.

Thanks Guy, that is what I thought but wanted to be sure as I had to revert back to the inactive boot on my last update that didn't go well. I didn't want to remove that backup until I was sure.

Hi, I would like to be clear in understating the boot environment. Currently Running is (14.4 Release p6) with a backup inactive boot of (14.3 Release p9). If I remove the inactive boot environment (14.3 Release p9) and do an upgrade does (14.4 Release p6) then become the inactive boot and the upgrade become the current and next boot. Thank for any clarification.

I was able to migrate the NSs back to PG3 with the exception of audio player. I deleted it from eisy-ui and tried to install it back in PG3 but PG3 will no longer install any node servers. If I install it in eisy-ui I keep getting the mentioned error. Additional info. According to UD Mobile the audio player keeps connecting and diconnecting.

I tried that again but with the same results. It shows connected but still getting the error. Update: all my node server have the same error except the ones still om PG3.

After mistakenly doing the beta upgrade and migrating pg3 nodes all seem to work except audio player. I gaet this message, Error loading node n011_0: Profiles loaded but nodedefs missing How do I fix? Thanks Also this message for avremote, Error loading node n001_controller: Profiles loaded but nodedefs missing

For a mic mixer I could suggest the eurorack ub802 or similar. The ub802 is very flexible in controlling the audio and is what I used in a similar setup with Russound.

I might suggest using a mic mixer into the Russound's pa input and connecting the Elk and eisy to the mic mixer. That way they could both page through the Rossound. Don't know if this what you may be looking for or not.

Problem solved with the release of IoX version 6.1.1.

Is there a way to move properties within the tile. I can move them up and down from the edit window but see no way to move them so that they are side by side in the tile, Initially when setting up the tile the properties did appear side by side but later as I edited the tile they no longer can be set that way, Thanks

Congratulations it works! I just started it up and it woke up the Tesla and I am receiving all the data. Thanks so much for all your patience.

After starting up the NS there was definite interaction with the phone app keeping it from connecting while I was trying to wake up the car. Then after I reinstalled the NS it didn't seem to sync up until I closed the phone app. After that both functioned properly. I included the log from a restart of the NS where both the NS and app were working properly. But, still no data. TeslaEV.txt

I gave it a try but still no data. I did a restart and authenticated again but no change. The Tesla was awake. At first I though that the NS was interfering with the app because commands were timing out but later it seemed to clear. I included a few screen shots.

Yes, in the US and each time I run the Stream test "Test Connection" it passes.

The trial version ran out so I purchased the NS. I included the log from install. I see several synched references but no data is loaded like climate info. Thanks TeslaEV.txt